1. Introduction
Thank you for choosing the SMAEL SL-8085 Digital and Quartz Sport Watch. This watch combines robust design with advanced functionality, featuring both analog and digital displays, LED backlight, stopwatch, alarm, and 50-meter water resistance. This manual provides detailed instructions to help you set up, operate, and maintain your watch.

2. Watch Components and Buttons
The SMAEL SL-8085 watch features four primary buttons and a crown for various functions:
- LIGHT Button (Top Left): Activates the LED backlight.
- MODE Button (Bottom Left): Cycles through different modes (Time, Alarm, Stopwatch, Date).
- START Button (Top Right): Used to start/stop functions in Stopwatch mode, and adjust settings in setting modes.
- RESET Button (Bottom Right): Used to reset functions in Stopwatch mode, and select items in setting modes.
- Crown (Right Side): Used for setting the analog time.

3. Setup Instructions
3.1 Setting Analog Time
- Pull out the crown on the right side of the watch.
- Rotate the crown to adjust the analog hands to the correct time.
- Push the crown back in to secure the analog time setting.
3.2 Setting Digital Time and Date
- From the normal time display, press the MODE button repeatedly until the digital time display starts flashing, indicating it's in setting mode.
- Press the RESET button to cycle through the settings: Seconds → Hour → Minute → Month → Date → Day of Week.
- Use the START button to adjust the flashing value.
- Once all settings are correct, press the MODE button to exit the setting mode.
3.3 12/24 Hour Format
In the digital time setting mode, when the hour is flashing, pressing the START button will toggle between 12-hour (with 'AM'/'PM' indicator) and 24-hour formats.
3.4 Setting the Alarm
- From the normal time display, press the MODE button until 'ALM' (Alarm) appears and the alarm time starts flashing.
- Press the RESET button to switch between setting the alarm hour and minute.
- Use the START button to adjust the flashing hour or minute.
- Press the MODE button to exit the alarm setting mode.
- To activate/deactivate the alarm, press the START button while in the alarm display mode (without flashing). An alarm icon will appear/disappear.

4. Operating Instructions
4.1 Mode Switching
Press the MODE button to cycle through the different functions of the watch:
- Normal Time Display
- Alarm Mode (ALM)
- Stopwatch Mode (STW)
- Date Display
4.2 Using the Stopwatch
- From the normal time display, press the MODE button until 'STW' (Stopwatch) appears.
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the RESET button to clear the stopwatch to zero.
- To resume timing after pausing, press the START button.
- To exit stopwatch mode, press the MODE button.
4.3 Activating Backlight
Press the LIGHT button (top left) to illuminate the digital display for a few seconds. This feature is useful in dark environments.

4.4 Product Showcase Video
A short video showcasing the SMAEL SL-8085 watch's features and design.
5. Maintenance
5.1 Water Resistance (50M)
Your SMAEL SL-8085 watch is water-resistant up to 50 meters (5ATM). This means it is suitable for daily use, showering, and swimming in shallow water. However, it is crucial to NOT press any buttons underwater, as this can compromise the water resistance and lead to water ingress. Avoid exposure to hot water or steam, as this can damage the seals.


5.2 Cleaning
To clean your watch, wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners or solvents, as these can damage the watch's case and strap materials.
5.3 Battery
The watch comes with a battery included. When the battery runs low, the digital display may dim or stop functioning. It is recommended to have the battery replaced by a professional watch technician to ensure proper sealing and water resistance.
6. Troubleshooting
- Digital display is blank or dim: The battery may be low and needs replacement.
- Analog hands are not moving: Check if the crown is pushed in completely. If it is, the battery might be depleted, or there could be a mechanical issue.
- Water appears inside the watch: Immediately stop using the watch and take it to a professional for inspection. Water ingress can cause severe damage.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not a stated feature for this model). If the issue persists, a reset or professional inspection may be needed.
- Time is inaccurate: Re-set both analog and digital times as per Section 3. If inaccuracy persists, the movement may require servicing.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | SMAEL |
| Model Number | SL-8085 |
| Movement | Quartz & Digital (Dual Display, Japan Original Digital Movement) |
| Display Type | Analog-Digital |
| Case Material | Strong Rubber + High Strength Hardened Glass |
| Dial Window Material | Organic Glass (High Definition Mirror Surface) |
| Case Shape | Round |
| Case Thickness | 19mm |
| Case Diameter | 49mm |
| Case Width | 55mm |
| Band Material | TPU (Strong PU) |
| Band Width | 22mm |
| Band Length | 23cm |
| Clasp Type | Buckle |
| Water Resistance | 50M (5ATM) |
| Weight | 61g |
| Wearing Range | 140mm-230mm |
| Features | LED Backlight, Stopwatch, Shock Resistant, Alarm, Auto Date, Complete Calendar, Multiple Time Zone, Week Display, Luminous Hands, Chronograph |
| Battery | Included |

8. User Tips
- Regular Sync: Periodically check and synchronize your analog and digital times to ensure consistent accuracy.
- Button Care: Always ensure the watch is dry before pressing any buttons, especially if you've been near water, to prevent moisture from entering.
- Backlight Usage: Use the LED backlight sparingly to conserve battery life.
- Strap Comfort: The TPU strap is designed for comfort. Adjust it to a snug fit without being too tight for optimal wear.
- Shock Resistance: While shock-resistant, avoid unnecessary impacts to prolong the watch's lifespan.
9. Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase records for reference. The watch includes a user manual for detailed guidance.