NEJE MAX 4 V2 Z-axis module
Contents
NEJE 20mm Z-Axis Module Instruction Manual
Model: MAX 4 V2 Z-axis module
Introduction
This manual provides essential information for the safe and effective use of your NEJE 20mm Z-Axis Module. Please read it thoroughly before installation and operation.
Compatibility Note: This module is compatible only with NEJE MAX 4 and NEJE MAX 4 V2 models. It is not compatible with other laser engraving machine models.
Safety Warnings & Precautions
Safety Warnings
- Do not disassemble the module while powered on.
- Avoid contact with moving parts to prevent pinching injuries.
- Ensure the module is securely installed before powering on.
Precautions
- Do not operate in high-temperature or humid environments.
- Avoid external impact or compression on the module.
- Non-professionals must not attempt self-repair.
- Not suitable for children under 36 months.
- To be used under the direct supervision of an adult.
Feature Overview
- Dual-mode Manual/Electric Operation: Automatically locks when powered on. Functions as a high-performance electric Z-axis and a user-friendly manual height adjuster with ±0.1 mm manual adjustment accuracy.
- Universal Compatibility: Features a 4-pin interface for seamless integration with NEJE Max series laser controllers.
- Stable Ultra-thin Design: Incorporates a flip-mount installation method to minimize overall thickness.
- High Rigidity: Ensures zero vibration even under heavy loads.
- Effective Travel: 20mm, with a usable stroke of 17mm, ideal for multi-layer cutting of materials up to 30mm thick (e.g., pen tips, blades, CNC tools, and other accessory mounts).
- Backward compatible with older Max4 connectors.
- Engineered for high-performance motion and heavy-load applications.

Setup Instructions
- Align and Secure: Align the module's interface during installation and tighten the securing screws.
- Power On & Verify: After powering on, confirm that the indicator LED lights up.
- Z-Axis Calibration: Perform Z-axis calibration using the control software.

Operating Instructions
The NEJE Z-Axis Module supports both manual and electric operation for precise height adjustment.
Manual Adjustment
Use the manual adjustment knob to fine-tune the Z-axis position. Each click provides a precise ±0.1mm adjustment, allowing for accurate focal length setting for various materials.

Electric Operation
When powered on, the module automatically locks, providing stable and consistent movement. Electric operation allows for automated Z-axis control via compatible NEJE Max series laser controllers, enabling layer-by-layer focus control for cutting and engraving.

Maintenance
- Guide Rails: Regularly clean the guide rails to ensure smooth movement and prevent obstructions.
- Tension Adjustment: If movement is not smooth, check and adjust the tension of the module's moving parts as needed.
Troubleshooting (FAQs)
- Q: Module does not operate.
- A: Check the power supply and connection status.
- Q: Movement is not smooth.
- A: Clean the guide rails or adjust tension.
- Q: Indicator LED does not light up.
- A: Replace the power cable or contact after-sales support.
Specifications
| Feature | Detail |
|---|---|
| Brand | NEJE |
| Model Number | MAX 4 V2 Z-axis module |
| Compatibility | NEJE MAX 4 and NEJE MAX 4 V2 laser controllers (4-pin interface) |
| Operation Mode | Dual-mode manual/electric |
| Manual Adjustment Accuracy | ±0.1 mm |
| Effective Travel | 20 mm |
| Usable Stroke | 17 mm |
| Max Material Thickness (Multi-layer cutting) | 30 mm |
| Design | Ultra-lightweight, high rigidity, ultra-thin with flip-mount installation |
| Product Weight | 0.373 kg |
| Package Dimensions (L x W x H) | 17 cm x 11 cm x 6 cm |

User Tips
- If you experience issues with smooth movement or homing, carefully check the alignment of the guide rods. Minor adjustments may be necessary to ensure optimal performance.
Warranty & Support
- Warranty: One-year warranty; free repair for non-man-made damage.
- Technical Support: 7x24-hour technical support available.
- Contact: For after-sales support, please contact dimifun0769@gmail.com.
A user manual in PDF format is available for download: View User Manual (PDF)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.