Dtirszxy P2897 P2575 P3700 945128972500101

Contents

User Manual

Dtirszxy Voice Remote Control for NVIDIA SHIELD Smart TV

Introduction

This manual provides instructions for the setup, operation, and maintenance of your new Dtirszxy voice remote control for NVIDIA SHIELD Smart TVs. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.

Product Overview

The Dtirszxy Voice Remote Control is designed for seamless interaction with your NVIDIA SHIELD Smart TV, offering both infrared (IR) and voice control capabilities. It features dedicated buttons for common functions and a comfortable ergonomic design.

Front view of the Dtirszxy Voice Remote Control for NVIDIA SHIELD Smart TV, showing all buttons including power, navigation, media controls, microphone, and Netflix.

Figure 1: Front view of the remote control with button layout.

Key Features:

  • Easy to operate, no programming required.
  • Infrared (IR) and Radio Frequency (RF) wireless communication.
  • Voice control functionality.
  • Dedicated Netflix button.
  • Compatible with NVIDIA SHIELD Smart TV models P2897, P2575, P3700, 945128972500101.

Setup Instructions

1. Installing Batteries

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery cover downwards or press the latch and lift to open.
    Front and back view of the Dtirszxy Voice Remote Control, illustrating the location of the battery compartment on the back.

    Figure 2: Remote control front and back, showing battery compartment.

  3. Insert two (2) AA 1.5V Alkaline batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
    Close-up view of the remote control with the battery cover removed, showing the empty battery compartment and polarity markings.

    Figure 3: Battery compartment with polarity indicators.

  4. Replace the battery cover by sliding it back into place until it clicks securely.
    Back view of the Dtirszxy Voice Remote Control with the battery cover securely in place.

    Figure 4: Remote control back with battery cover closed.

2. Pairing (No Programming Required)

This remote control is designed to work out-of-the-box with compatible NVIDIA SHIELD Smart TV models. No manual programming or pairing steps are typically required for basic IR functions. For voice control, ensure your NVIDIA SHIELD device's Bluetooth is enabled and the remote is within range. The device should automatically detect and pair with the remote for voice commands.

Operating Instructions

Point the remote control directly at your NVIDIA SHIELD Smart TV or connected device for optimal performance.

Button Functions:

ButtonFunction
Power (⏻)Turns the NVIDIA SHIELD device On/Off.
Menu (≡)Accesses the menu or settings.
Navigation Ring (Up, Down, Left, Right, OK)Navigates through menus and selects items.
Back (◀)Goes back to the previous screen or menu.
Home (⌂)Returns to the home screen.
Play/Pause (⏸)Plays or pauses media playback.
Fast Forward (⏩)Fast forwards media playback.
Rewind (⏪)Rewinds media playback.
Volume Up (🔊)Increases volume.
Volume Down (🔉)Decreases volume.
Microphone (🎤)Activates voice control for commands and search.
NetflixLaunches the Netflix application directly.

Voice Control:

Press and hold the Microphone button (🎤) and speak your command clearly. Release the button when finished. Ensure your NVIDIA SHIELD device is connected to the internet for voice commands to function correctly.

Maintenance

Cleaning:

  • Wipe the remote control with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or alcohol, as these may damage the surface.

Battery Replacement:

Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AA 1.5V Alkaline batteries. Do not mix old and new batteries or different types of batteries.

Storage:

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage.

Troubleshooting

ProblemPossible CauseSolution
Remote not responding.Dead or incorrectly inserted batteries.Replace batteries with new AA 1.5V Alkaline batteries, ensuring correct polarity.
Remote not responding.Obstruction between remote and TV/device.Ensure a clear line of sight between the remote and your NVIDIA SHIELD device.
Voice control not working.Remote not paired for Bluetooth or device not connected to internet.Check NVIDIA SHIELD device settings to ensure Bluetooth is enabled and the remote is paired. Verify internet connection.
Buttons are sticky or unresponsive.Dirt or debris under buttons.Clean the remote control as described in the Maintenance section.

Specifications

FeatureDetail
Brand NameDtirszxy
Model NumberP2897, P2575, P3700, 945128972500101
UseTV (NVIDIA SHIELD Smart TV)
Wireless CommunicationRF, IR
Frequency433 MHz
Channel8
Support APPNo
Battery Type2 x AA 1.5V Alkaline (Not Included)
OriginMainland China
CertificationNONE

User Tips

  • For best voice control performance, speak clearly and directly into the microphone.
  • Keep the remote control within a reasonable distance of your NVIDIA SHIELD device for reliable operation.
  • If you experience intermittent issues, try removing and reinserting the batteries to reset the remote.

Warranty and Support

For any questions or issues not covered in this manual, please contact the seller's customer service. Keep your purchase receipt for any warranty claims.

This product is designed for ease of use and durability. Proper care and maintenance will ensure its long-term performance.

© 2023 Dtirszxy. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.