1. Introduction and Overview
The MPPT (Maximum Power Point Tracking) Solar Charge Controller is an advanced device designed to optimize power generation from solar panels. It tracks the highest voltage and current (VI) values in real-time, ensuring your battery system charges with maximum power output. This controller is essential for off-grid photovoltaic systems, coordinating the operation of solar panels, batteries, and loads.
It features an intuitive LCD display that provides real-time operating status, parameters, and control settings. Users can easily navigate and modify these parameters to suit various system requirements. The controller also includes comprehensive electronic fault self-test functions and robust electronic protection, minimizing potential damage from installation errors or system failures.
Watch a brief demonstration of the MPPT Solar Charge Controller:
Video: Demonstration of the MPPT Solar Charge Controller's display and operation.
2. Safety Instructions
Please read and understand these safety guidelines before operating the controller to prevent injury or damage.
- The voltage handled by this controller can exceed safe limits for humans. Operate only after completing safety training.
- The controller contains no user-serviceable parts. Do not attempt to disassemble or repair the unit yourself.
- Install the controller indoors to protect components from exposure and prevent water ingress.
- Ensure the installation area is well-ventilated, as the heat sink can become very hot during operation.
- It is recommended to install appropriate fuses or circuit breakers external to the controller.
- Before wiring or adjusting the controller, disconnect all wiring from the photovoltaic array and any fuses or circuit breakers near the battery terminals.
- After installation, verify that all wiring connections are tight to prevent overheating from loose connections.
- When handling open lead-acid batteries, wear protective goggles. If battery acid contacts skin or eyes, rinse immediately with clean water.
- Avoid placing metal objects near batteries to prevent short circuits.
- Ensure good ventilation around batteries, as acidic and combustible gases may be produced during charging.
- Avoid sparks near batteries.
- When connecting the system, the component's output voltage may exceed safe human voltage levels. Use insulated tools and ensure your hands are dry during operation.
- The controller's battery terminals can connect to either a single battery or a battery bank.
- Always follow the battery manufacturer's safety recommendations.
- System connection wires should be selected to maintain a current density not exceeding 4A/mm².
- Ground the controller's ground terminal.
3. Product Features
- Advanced MPPT Charging Mode: The built-in maximum power tracking algorithm significantly improves the energy utilization efficiency of photovoltaic systems, offering about 25% higher efficiency than traditional PWM charging. MPPT tracking efficiency can reach up to 99.9%.
- High Conversion Efficiency: Adopts advanced digital power supply technology, achieving a circuit energy conversion efficiency of up to 98%.
- Multiple Battery Type Support: Compatible with various battery types including colloidal, sealed, flooded, and lithium batteries (LiFePO4, Li(NiCoMn)O2). User-programmable settings for absorption voltage, floating voltage, low voltage disconnect, and load timer are available via advanced settings.
- Current Limiting Charging: Automatically reduces charging power when the charging current exceeds the rated current, protecting the system.
- Over-Temperature Protection: Features a built-in mechanism that linearly decreases charging current when the device temperature exceeds a set value, preventing high-temperature damage.
- Temperature Compensation: Automatically adjusts charging and discharging parameters based on temperature to extend battery life.
- Robust Design: Utilizes a metal shell for superior heat dissipation.
- Lithium Battery OV Charging Function: Supports over-voltage charging for lithium batteries.
- High Input Voltage Resistance: Max 230VDC input allows for more solar panels in series, reducing wiring specifications and system costs.
- Built-in WiFi Monitoring: Integrated WiFi device allows for remote monitoring of the controller's working status via a mobile app (iOS and Android compatible). Ensure installation in an area with good 2.4GHz WiFi signal (5-10m from router recommended).
- HD Colorful Display: Features a color multi-function display screen for clear viewing of solar panel voltage, battery voltage, charging current, daily/total cumulative power generation, device temperature, battery type, and other parameters.
- Language Support: The display interface can be switched between Chinese and English.
- Fan Heat Dissipation: Intelligent fan activates when temperature >45℃ and turns off <40℃, using bearing technologies for extended life (up to 5000hrs).
4. Installation and Linking Methods
4.1. Installation Safety Distance
To ensure effective heat dissipation, maintain the following clearances around the controller:
- Left/Right: 20 CM
- Top/Bottom: 30 CM

Image: Controller dimensions and a basic system overview showing solar panel, controller, battery, and DC load.
4.2. Line Connection Requirements
Follow these steps for proper wiring. Always connect in the specified order:
- Connect Battery: First, connect the positive (+) and negative (-) terminals of the battery to the controller.
- Connect DC Load: Next, connect the positive (+) and negative (-) terminals of the DC load to the controller.
- Connect Solar Panel: Finally, connect the positive (+) and negative (-) terminals of the solar panel to the controller.

Image: Detailed wiring diagram showing connections for PV input, battery, load, and RS485 communication port.
4.3. Controller Appearance and Interface

Image: Front panel of the controller, highlighting the LCD display and control buttons (ESC, UP, DOWN, SET).
The controller features a clear LCD display and control buttons for easy interaction:
- Solar Charging Controller Function Indicator Light: Indicates the operational status.
- Solar Charging Controller LCD Display Screen: Shows real-time data and settings.
- Solar Charging Controller Interface Setting Button: Used for navigation and parameter adjustment.
- Installation Hole: For mounting the solar charging controller.
5. Operation Instructions
5.1. Key Operation Instructions
The main display shows various parameters. Use the buttons to navigate and adjust settings.

Image: The HD colorful display showing the main menu with real-time data and an example of the advanced settings menu.
Key display elements and their meanings:
| Number | Name | Number | Name |
|---|---|---|---|
| 1 | Solar panel indicator light | 7 | DC load output power |
| 2 | Charging indicator light | 8 | DC load |
| 3 | Load indicator light | 9 | DC load output current |
| 4 | Warning indicator light | 10 | DC load output voltage |
| 5 | Return/load switch key | 11 | Battery voltage |
| 6 | Flip Up/+ | ||
| 7 | Down Page/- | ||
| 8 | Confirm/Set key |
5.2. Device Information Browsing
Short press the UP and DOWN buttons to browse through various information screens, including:
- Today's current curve chart
- Device information (e.g., Machine Name, Set Current, Battery Number, Bulk Charge Voltage, Float Voltage, Battery Restore Voltage, Battery Low Voltage, Output Time, Backlight, Software Version, LCD Version, Device Address)
- Current graphs for the past 1, 2, and 3 days.
5.3. Quick Parameter Setting
From the main page, press and hold the SET button for 3 seconds to enter the quick settings menu. Here you can adjust:
- Backlight mode: Keep On / Delayed closing (turns off after 60 seconds).
- Load output Type: Light controlled switch.
- Load opening time: Set specific hours for load operation.
- Time setting: Adjust the current date and time.
- Clean generation: Option to clear generation data.
- Language: Switch between Chinese and English.
5.4. Advanced Settings
To access advanced system settings, press and hold both the ESC and SET keys simultaneously for 5 seconds from the main page. The password is 1111.
In advanced settings, you can:
- Customize battery type parameters (long press for quick adjustment).
- Adjust charging current settings (long press for quick adjustment).
5.5. WiFi Status Indicator (WiFi version only)
The controller has a built-in WiFi module for monitoring. The display shows the WiFi status:
| Model | Show |
|---|---|
| WiFi module abnormality | WiFi icon flashes red slowly |
| WiFi not connected | WiFi icon flashes white slowly |
| Excellent WiFi signal | WiFi icon 3 bars blue |
| Good WiFi signal | WiFi icon 2 bars blue |
| Poor WiFi signal | WiFi icon 1 bar blue |
For optimal performance, place the controller in an area with a strong WiFi signal. Restoring factory settings can unbind the device. The device time will automatically calibrate after a successful WiFi connection.

Image: The controller demonstrating its built-in WiFi capability and monitoring via a smartphone application.
6. Maintenance
The MPPT Solar Charge Controller is designed for minimal user maintenance. There are no internal components that require regular maintenance or repair by the user. Do not attempt to open or service the controller yourself.
To ensure optimal performance and longevity:
- Regularly check all wiring connections for tightness to prevent loose connections and potential overheating.
- Keep the controller's exterior clean and free from dust and debris.
- Ensure the installation area remains well-ventilated to allow for proper heat dissipation, especially during high-power operation.
- Monitor the display for any warning indicators or error messages and refer to the troubleshooting section if issues arise.
7. Troubleshooting
The controller features an electronic fault self-test function to help identify and mitigate issues. If you encounter problems, refer to the following common troubleshooting steps:
7.1. WiFi Connectivity Issues
If the WiFi icon indicates a problem (flashing red or white, or showing fewer bars), consider the following:
- Poor Signal: Relocate the controller to an area with a stronger WiFi signal. It is recommended to be 5-10 meters away from the router.
- Network Type: Ensure your WiFi network is 2.4GHz. The controller does not support 5GHz networks.
- Router Issues: Check your router's status and ensure it is functioning correctly.
- Reconnection: If the WiFi connection is lost, try restoring factory settings (see Advanced Settings) to re-establish the connection. The device time will automatically calibrate upon successful WiFi connection.
7.2. General System Malfunctions
- No Power: Ensure the battery has sufficient voltage to power on the controller. If the battery voltage is too low, the controller may not start.
- Charging Problems: Check solar panel connections and ensure they are receiving adequate sunlight. Verify battery connections are secure.
- Overheating: Ensure the controller is installed in a well-ventilated area and that the fan is operating if the device temperature is high.
- Error Codes: If the display shows specific error codes or warning indicators, consult the full PDF manual for detailed explanations and solutions.

Image: Overview of the controller's protection features including self-recovery, short-circuit, open-circuit, reverse connect, over-current, and high-temperature protection.
8. Technical Specifications
The following table outlines the technical specifications for the HM Series MPPT Solar Charge Controllers:
| Feature | 40A Model | 60A Model | 80A Model | 100A Model | 120A Model |
|---|---|---|---|---|---|
| Maximum Photovoltaic Voltage | 230VDC (Solar Panel Open Circuit Voltage) | ||||
| Charging Current | 0-40A adjustable | 0-60A adjustable | 0-80A adjustable | 0-100A adjustable | 0-120A adjustable |
| Battery Type Support | |||||
| Sealed, Gel, Watering Battery | 12V/24V/48V/96V (Automatic recognition + adjustable 12V/24V/48V/60V/72V/84V/96V) | ||||
| Lithium Iron Phosphate, Ternary Lithium Battery | 12V/24V/36V/48V/60V/72V/84V/96V (Adjustable) | ||||
| Maximum Input Power of Solar Panel | 480W/12V, 960W/24V, 1920W/48V, 2400W/60V, 2880W/72V, 3840W/96V | 720W/12V, 1440W/24V, 2880W/48V, 3600W/60V, 4320W/72V, 5760W/96V | 960W/12V, 1920W/24V, 3840W/48V, 4800W/60V, 5760W/72V, 7680W/96V | 1200W/12V, 2400W/24V, 4800W/48V, 6000W/60V, 7200W/72V, 9600W/96V | 1440W/12V, 2880W/24V, 57600W/48V, 7200W/60V, 8640W/72V, 11520W/96V |
| Advanced Setting for Charging Voltage | 9-136V Adjustable | ||||
| Charging Method | Power tracking, fast charging, floating charging | ||||
| Start Charging | Photovoltaic voltage > battery voltage + 2V | ||||
| DC Output Current | 40A | ||||
| Communication Interface | RS485/WiFi/Bluetooth (optional) | ||||
| Operating Temperature | -20°C ~ 65°C | ||||
| Cooling Method | Air Cooling, Fan | ||||
| Altitude | 0-3000m | ||||
| Product Size | 262x218x102mm | 329x268x102mm | |||
| Net Weight | 2.7kg | 2.86kg | 4.65kg | 4.85kg | 4.85kg |
| Gross Weight | 2.85kg | 3.0kg | 4.9kg | 5.1kg | 5.1kg |
Note: Specifications may vary slightly between models (e.g., HM6048, HM6096, HM8048, HM10048, HM12048, HM8096, HM10096, HM12096).

Image: Visual representation of the controller's compatibility with various battery types.

Image: Comparison of maximum input voltage, showing the JYYHSRPOWER controller's ability to handle up to 230VDC from solar panels in series.
9. User Tips
- Initial Activation: When activating the controller for the first time, ensure the battery has sufficient voltage. The controller may not power on if the battery voltage is too low.
- WiFi Signal Strength: For reliable app monitoring, install the controller in a location with a strong 2.4GHz WiFi signal. A distance of 5-10 meters from your router is recommended.
- Solar Panel Configuration: The controller supports a maximum input open circuit voltage of 230V. If your solar panel Vmp voltage is around 38-42V, you can connect up to 4 solar panels in series. Always ensure your total solar panel open circuit voltage does not exceed the controller's maximum limit to prevent damage.
- Battery Compatibility: The controller is highly adaptable to various battery types. For custom battery settings, utilize the advanced setting options to program absorption voltage, floating voltage, low voltage disconnect, and load timer.
10. Warranty and Support
For any technical assistance, warranty claims, or support inquiries, please contact the manufacturer or your authorized dealer. Keep your purchase receipt as proof of purchase.
For detailed documentation, including a comprehensive PDF user manual, please refer to the following link: