1. Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and safety of TEVERUN electric scooter accessories, including the Motherboard (Core Control Board), Display Board (Control Panel), Charger, Casing, and Shock Absorber. Adhering to these guidelines will ensure safe use and extend the lifespan of your accessories.
This is a general manual; structural differences may exist between models. Please read carefully before installation and use to ensure correct operation. Riding an electric unicycle requires a certain level of balance; beginners are advised to practice gradually with appropriate protective measures.
2. Product Overview and Specifications
The TEVERUN Tetra 60V 37A Controller is a brushless controller designed for electric scooters, specifically compatible with TETRA-TFT models. It manages motor speed, balance, power, and various functions, ensuring stable and safe operation.

Image: Close-up view of the TEVERUN Tetra 60V 37A Brushless Controller, displaying its voltage, current, model number, and compatible scooter models.
Specifications:
| Feature | Detail |
|---|---|
| Product Type | Brushless Controller |
| Brand | TEVERUN |
| Voltage | DC48-60V |
| Current | 37A |
| Model | BLADE60V37A6G |
| Compatible Scooters | TETRA-TFT |
| Controller Type | Front or Rear (selectable) |
3. Installation and Setup
3.1. Motherboard (Core Control Board)
The motherboard is the core control component, acting as the "brain" of the electric unicycle. It receives signals from the display board and sensors, controlling motor speed, balance adjustment, power switch, and other functions. It connects all electrical components to ensure stable and safe operation.
Important Installation and Wiring Tips:
- Before installation, take photos of each wire connection on the original motherboard and label the corresponding port locations. This will help you match the wiring later and prevent damage from incorrect connections.
- Unplug all connectors from the old motherboard (pull gently to avoid damaging wires). Match the wire plugs to the corresponding ports on the new motherboard according to your photos and color codes. Ensure all plugs are inserted firmly and without looseness. (Ports have anti-fooling designs; do not force insertion).
- If you are unsure about the wiring method, refer to the photos of the original wiring. Do not connect blindly.
- Secure the motherboard in its dedicated mounting position inside the unicycle using screws. This prevents the motherboard from shaking or rubbing against wires during riding, which could lead to poor contact or short circuits.
- This product does not include screws or installation tools. Please prepare appropriate screws and tools.
3.2. Display Board (Control Panel)
The display board is installed on the surface of the unicycle casing (or handlebar) to show remaining battery power, riding speed, mileage, fault alerts, and mode switching status. Some display boards integrate simple buttons for power on/off and mode adjustment, allowing riders to monitor the device's operating status in real-time.
Installation and Usage:
- Align the display board with the corresponding mounting recess on the casing. Adjust its position to ensure the display faces a direction convenient for viewing and aligns with the screw holes.
- Secure the display board in the recess using your own screws. Tighten the screws to prevent the display board from loosening or falling off during riding. (Apply moderate force to avoid crushing the display board).
- Thread the display board's connecting cable through the reserved hole in the casing and connect it to the corresponding port on the motherboard. Ensure the plug is firmly inserted and not loose. Organize the cables to prevent pinching or wear.
- After installation, turn on the power and check if the display board functions normally. Verify button responsiveness (if applicable), and check for issues like black screen, garbled display, or unresponsive buttons.
3.3. Charger
The charger is used to replenish the built-in battery of the electric unicycle. It converts AC power to the appropriate charging voltage and current for the battery, ensuring safe and efficient charging. It is an essential accessory (must be matched with a charger compatible with the battery specifications).
Usage Instructions:
- Before charging, confirm that the charger specifications (voltage, current) match the unicycle battery specifications. Do not use incompatible chargers, as this may cause battery bulging, leakage, or fire.
- Inspect the charger for any damage, such as broken power cords, cracked or oxidized charging plugs. If any abnormalities are found, do not use it. Replace it immediately with an original charger of the same specifications.
- First, insert the charger's charging plug into the unicycle's charging port, ensuring it is firmly inserted and not loose. Then, plug the charger's power cord into a standard AC outlet (220V household outlet).
- During charging, the charger's indicator light typically shows red (indicating charging in progress). When the battery is fully charged, the indicator light will turn green. Promptly unplug the charger to avoid overcharging and potential damage to the battery.
- After charging, first unplug the power cord from the AC outlet, then unplug the charging plug from the unicycle. Organize the charger and power cord and store them properly.
3.4. Casing (Body Casing)
The casing provides protection and structural support for the electric unicycle. It encloses the internal motherboard, battery, motor, and other core components, protecting them from dust, water, and impacts. It also prevents riders from being injured by internal components during use. Some casings integrate footrest areas for riders to place their feet, ensuring stable balance.
Installation Instructions:
- Before installation, ensure all internal components (motherboard, battery, motor) are properly installed. Organize all cables to prevent them from being exposed or pinched.
- Align the casing with the unicycle body. Ensure that the reserved holes on the casing (charging port, display board hole, screw holes) align with the internal components and ports.
- Using your own screws, insert them through the casing's screw holes one by one and tighten them clockwise. Ensure even force on each screw, so the casing fits snugly with the body without gaps or looseness.
- After installation, check if the casing is secure. Lightly press on various parts of the casing to check for looseness or abnormal noises. Confirm that the charging port, display board, and other interfaces are exposed correctly and do not interfere with operation.
3.5. Shock Absorber
The shock absorber is installed at the bottom of the electric unicycle (or below the footrest area). Its primary function is to mitigate bumps and vibrations encountered during riding, enhancing riding comfort. It also protects internal precision components like the motherboard and battery from loosening or damage due to vibrations, helping to maintain riding stability.
Installation Instructions:
- Align the shock absorber with the unicycle body's shock absorber mounting interface. Adjust the angle of the shock absorber to ensure the screw holes align.
- Using your own dedicated screws, secure both ends of the shock absorber to the body interface. Tighten the screws clockwise to ensure the shock absorber is firmly fixed without shaking or looseness.
- After installation, gently press the shock absorber by hand to check if its damping effect is normal. Look for any sticking, abnormal noises, and confirm that the shock absorber can flex freely without jamming.
4. Operating Guidelines
4.1. General Operation
Once all components are installed and checked, ensure all connections are secure and functions are normal. Wear a helmet, knee pads, and other safety gear before riding.
Electric unicycle riding requires a certain level of balance. Beginners are advised to practice gradually in open, flat areas. Avoid riding in crowded, high-traffic, or complex road conditions.
4.2. Charger Operation Precautions
- When charging, place the charger in a well-ventilated, dry, and cool area, away from flammable and explosive materials (such as alcohol, gasoline, cardboard boxes). Avoid direct sunlight, high-temperature baking, or water immersion.
- During charging, do not touch the charger casing (slight heating is normal; if it becomes severely hot, smokes, or emits an unusual odor, immediately unplug the power and stop using it, then contact customer service).
- Do not overcharge for extended periods (do not leave the charger plugged in for more than 2 hours after the battery is fully charged) to prevent battery bulging, leakage, fire, and other safety hazards.
4.3. Display Board Operation Precautions
- Avoid hitting, dropping, or scratching the display board to prevent screen damage or malfunction.
- When cleaning the display board, use a dry, soft cloth to gently wipe the surface. Do not rinse directly with water or wipe with a wet cloth to prevent water ingress and short circuits.
- Avoid direct sunlight on the display screen to prevent screen aging, blurred display, and impaired visibility.
4.4. Casing Operation Precautions
- Avoid severe impacts, drops, or scratches to the unicycle casing to prevent damage, deformation, loss of protective function, and subsequent damage to internal components.
- When riding, place both feet firmly on the footrest area of the casing (if applicable). Avoid stepping on the edges of the casing to prevent cracking.
- Keep the casing clean. Use a damp cloth to gently wipe surface stains. Avoid using corrosive cleaning agents, which can cause the casing to fade or be damaged.
4.5. Shock Absorber Operation Precautions
- Avoid severe impacts or squeezing of the shock absorber to prevent deformation, damage, and loss of damping function.
- When riding, avoid prolonged travel on uneven or highly varied terrain to reduce the load on the shock absorber and extend its service life.
- When cleaning the unicycle, avoid directly rinsing the shock absorber interface with water to prevent rust, sticking, and impaired damping performance.
5. Maintenance and Care
5.1. Daily Maintenance
- Keep the unicycle clean and dry. Regularly wipe the casing and display board. Clean dust from the charging port and other interfaces to prevent dust accumulation from causing poor contact.
- Regularly check the tightness of all accessory fixing screws and connecting wires. Ensure screws are tightened, wires are secure, and there is no looseness, damage, or oxidation.
- When the unicycle is not in use for a long time, turn off the power. Charge the battery to 50%-70% capacity and store it in a dry, ventilated, cool place. Avoid sun exposure, rain, squeezing. Recharge once a month.
5.2. Component-Specific Maintenance
- Motherboard: Avoid water ingress, squeezing, and high-temperature exposure to prevent internal component damage, which could lead to unicycle startup failure or loss of balance control.
- Display Board: Regularly check the connection cable to the motherboard. If the display shows a black screen, garbled characters, or other abnormalities, first check if the connection cable is loose.
- Charger: Do not disassemble or modify the charger. If the charger malfunctions (e.g., unable to charge, abnormal indicator light, damaged power cord), replace it with an original charger of the same specifications. Do not continue to use a repaired charger.
- Casing: Regularly check the casing fixing screws for looseness. If loose, tighten them promptly. If the casing is severely damaged or deformed, replace it promptly to prevent water ingress and damage to internal components.
- Shock Absorber: Regularly check the shock absorber's fixing screws for looseness. Check for oil leaks or damage. If any abnormalities are found, repair or replace promptly.
- Motor: Avoid water ingress, impacts, and overloading. Regularly check motor connection wires for firmness. If abnormal noises or insufficient power occur, contact customer service for inspection.
- Built-in Battery: Use a battery with matching voltage. Do not mix or modify batteries. Avoid squeezing, puncturing, high temperatures, or water ingress. Use original or matching chargers for charging.
- Foot Pad: Regularly check if the foot pad is loose, worn, or damaged. If severely worn, replace it promptly.
6. Troubleshooting
- Unicycle fails to start, accelerates abnormally, or loses balance: First, check if the motherboard wiring is loose or has poor contact. If the wiring is normal, contact customer service for further inspection.
- Display board shows black screen, garbled characters, or abnormal display: First, check if the connection cable to the motherboard is loose. If the connection is normal, contact customer service for repair or replacement.
- Charger malfunctions (e.g., unable to charge, abnormal indicator light, damaged power cord): Replace it with an original charger of the same specifications. Do not continue to use a repaired charger.
- Accessories are loose, make abnormal noises, malfunction, or are damaged: Immediately stop using the unicycle. Repair or replace the affected components. Do not ride with faulty components.
7. Safety Precautions
- After all accessories are installed, conduct a comprehensive check to confirm secure connections and normal functionality. Always wear a helmet, knee pads, and other safety gear before riding.
- Avoid violent disassembly, overloading, or severe impacts to prevent accessory damage and extend the service life of the unicycle and its components.
- Exercise caution when riding in rainy weather or on wet roads to prevent water ingress into the casing and internal components, which could lead to short circuits or malfunctions. Avoid sudden acceleration or braking to prevent loss of balance.
- It is recommended to use original or compatible accessories. Do not use accessories that do not meet specifications, as this may affect the safe operation and service life of the unicycle.
8. User Tips
- Always double-check all wiring connections before powering on, especially after any installation or maintenance.
- For optimal battery health, avoid completely draining the battery and do not leave it fully charged for extended periods.
- Regular visual inspections of the controller, display, and wiring can help identify potential issues before they become serious.
9. Support and Service
If you have any questions during installation, wiring, or use, please contact our online customer service for assistance.
We can provide relevant installation videos and wiring diagrams to help you successfully complete the installation and usage.
PDF User Manual: View User Manual (PDF)
