Wishcolor U-PRO2 280W+100W

Contents

Wishcolor U-PRO2 280W+100W Digital Class D Power Amplifier Board User Manual

1. Introduction

Thank you for purchasing the Wishcolor U-PRO2 280W+100W Digital Class D Power Amplifier Board. This manual provides essential information for the safe and effective use of your amplifier board, including safety warnings, setup instructions, operational guidelines, maintenance tips, troubleshooting, and technical specifications. Please read this manual thoroughly before installation and operation.

2. Safety Warnings

Before using this product, please read and comply with all safety instructions to prevent damage or injury.

2.1 Electrical Safety

  • Use only the power adapter or a compliant power supply that matches the product's specifications.
  • Do not use in humid environments unless the product specifically states a waterproof rating.
  • If the power cord is damaged, do not continue to use it; contact support for replacement.
  • Always disconnect power before cleaning or performing any maintenance.

2.2 Usage Environment

  • Operating temperature range: -10°C to 40°C (subject to model specifications).
  • Avoid direct sunlight, high temperatures, and dusty environments.
  • Ensure good ventilation and do not block heat dissipation paths.

2.3 Operational Safety

  • Do not disassemble or modify the product yourself; there are no user-repairable parts inside.
  • Prevent liquid from entering the product interior.
  • If the product emits smoke, unusual odors, or abnormal noise, immediately disconnect the power supply and contact after-sales service.

3. Product Overview

The Wishcolor U-PRO2 is a high-performance digital Class D power amplifier board designed for professional audio applications, including 100/70V line amplifiers. It features ultra-low distortion, high dynamic range, and integrated power supply with Power Factor Correction (PFC).

3.1 Key Features

  • Optimized for 100/70V Line Amplifiers: High-voltage tracks for direct drive, compliant with Energy Star standards.
  • Compact Size: 38x70mm (1.5x2.8 inches), suitable for 1RU½ rack size with integrated power.
  • Audiophile Level Performance: Proprietary UMAC Class-D technology for unparalleled high performance, dynamic range, and low distortion.
  • Universal Power Supply with PFC: UREC PFC technology enables universal AC power operation (85-265V) worldwide.
  • High Efficiency: Minimizes the need for radiators and cooling, improving long-term reliability.
  • Auxiliary Power Supply: Provides ±15V, +7.5V for DSP or analog I/O cards.
  • Interface Compatibility: Compatible pin interfaces with S-PRO, T-PRO, and L-PRO modules.
  • Safety Certified: Passed safety certification and verified compliance with EMC requirements.

3.2 Product Components

The amplifier board includes various electronic components such as capacitors, inductors, integrated circuits, and connectors for power input, audio input, and speaker output.

Wishcolor U-PRO2 amplifier board with included connection cables

Figure 1: Wishcolor U-PRO2 amplifier board with included connection cables.

Top view of the Wishcolor U-PRO2 amplifier board, showing components

Figure 2: Top view of the Wishcolor U-PRO2 amplifier board, showing main components.

Bottom view of the Wishcolor U-PRO2 amplifier board, showing solder points and heat sink

Figure 3: Bottom view of the Wishcolor U-PRO2 amplifier board, showing solder points and heat sink.

4. Setup and Installation

4.1 Unpacking Inspection

After opening the package, please check that all items are complete and undamaged. If you find any items missing or damaged, please contact your seller immediately.

4.2 Power Supply Connection

  • Ensure the power supply voltage is consistent with the product specifications (85-265V AC, 50/60Hz).
  • Connect the appropriate AC power input to the board's power input terminals.

4.3 Audio Input and Output Connections

  • Connect your audio source (e.g., preamplifier, mixer) to the audio input terminals on the amplifier board.
  • Connect your speakers (or 100/70V line transformer for line applications) to the corresponding speaker output terminals. Ensure correct polarity.

4.4 Enclosure and Cooling

  • It is recommended to install the amplifier board within a suitable enclosure to protect it from dust, moisture, and physical damage.
  • Ensure adequate ventilation and heat dissipation, especially if operating at high power levels. The board is designed for high efficiency, but proper airflow is still crucial for long-term reliability.

5. Operation

Once properly installed and connected, the amplifier board will function upon receiving power and audio input. There are no direct user controls (buttons, display) on the board itself; operation is managed by the connected audio source and power supply.

  • Power On: Apply AC power to the board.
  • Audio Playback: Start playing audio from your connected source. The amplifier will amplify the signal to the connected speakers.
  • Power Off: Disconnect AC power from the board.

6. Maintenance and Care

  • Cleaning: Wipe the outer casing (if enclosed) or the board itself (when power is off) with a soft, dry cloth. Do not use chemical solvents.
  • Storage: When not in use for an extended period, ensure the board is clean and stored in a cool, dry place, away from direct sunlight and dust.

7. Troubleshooting

ProblemPossible ReasonsSolution
Unable to power on / No soundNo power connection, incorrect voltage, faulty power supply.Check power connection, ensure correct voltage, test power supply.
Distorted or no audio outputIncorrect audio input/output connections, faulty audio source, speaker issues.Verify all audio connections, test with a different audio source, check speakers.
OverheatingPoor ventilation, excessive load.Ensure adequate airflow around the board, reduce load if possible.
Other faultsInternal component failure.Contact technical support.

8. Specifications

ParameterValue
Output Power280W + 100W
Output CircuitUMAC Class D - full-bandwidth PWM modulator
Amplifier Gain26dB/32dB (bridging mode)
SNR>119dB (A-weighted, 20Hz - 20kHz, 8ohms load)
THD+N (typ.)< 0.05% (20Hz - 20kHz, 8ohms load, lower than rated power 3dB)
Frequency Response20Hz - 20kHz (+/-0.25dB, 8ohms load, lower than rated power 3dB)
Damping Coefficient> 350 per channel (8ohms load, 1kHz and below)
Circuit ProtectionShort-circuit, DC, under-voltage, temperature, over-load
Power SupplyUREC universal main switch mode power supply with PFC
Working VoltageUniversal power supply, 85-265V AC
SMPS RMS Power Limit280W
DSP Auxiliary Power Supply±15V, +7.5V (max total 9W)
Standby Power Consumption< 0.25W (compliant with Green Energy Star and ErP1275/2008/EC)
Product Size (WxHxD)38 x 70 x 180mm
Net Weight238g
Protection LevelIP20 (for indoor use)
AuthenticationCE, RoHS

9. User Tips

  • Verify Components: Upon receiving your amplifier board, carefully compare it with product images and descriptions to ensure all components are present and match expectations.
  • Proper Grounding: Ensure proper grounding practices are followed during installation to minimize noise and ensure safety.
  • Cable Management: Use high-quality shielded cables for audio signals and ensure power cables are routed away from signal cables to prevent interference.

10. Warranty and Support

10.1 Warranty Policy

Warranty period is typically 12 to 24 months from the date of purchase, subject to store announcement and specific terms. Please refer to your purchase documentation for exact warranty details.

10.2 Technical Support

For detailed technical documentation, calibration certificates, or further assistance, please contact your seller via the AliExpress internal message system or email: wishcolor@126.com. Response time is typically within 24 working hours.

11. EU Compliance Information

11.1 CE Declaration of Conformity

This product complies with the essential requirements of the following EU directives:

  • Low Voltage Directive (LVD) 2014/35/EU
  • Electromagnetic Compatibility Directive (EMC) 2014/30/EU
  • RoHS Directive 2011/65/EU

11.2 Waste Disposal (WEEE)

The wheeled bin symbol marked with an X on the product indicates that, according to EU Directive 2012/19/EU, this product must not be disposed of as unsorted municipal waste. It must be collected and recycled separately.

12. Disclaimer

This instruction manual is a general version; the actual product functions and parameters shall prevail. The manufacturer reserves the right to change product designs and specifications without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.