Road Top Linux Touch Screen Wireless Carplay Car Multimedia Display

Contents

RoadTop Linux Touch Screen Wireless Carplay Car Multimedia Display User Manual

For Audi A5 (2008-2016)

1. Product Overview

This manual provides detailed instructions for the installation, setup, and operation of your RoadTop Linux Touch Screen Wireless Carplay Car Multimedia Display. This system is designed to upgrade your vehicle's multimedia capabilities while retaining original car functions.

1.1 Key Features

  • Display Sizes: Available in 8.9-inch and 12.3-inch options.
  • High Resolution: 1920*720 HD Resolution for clear visuals.
  • Operating System: Linux-based system.
  • Connectivity: Supports Wireless/Wired CarPlay, Wireless/Wired Android Auto, AirPlay, and Autolink.
  • Touch Screen: Intuitive touch interface.
  • Original Car System Retention: Retains OEM factory system, CD/DVD player, steering wheel control, speaker sound output, reversing camera, and iDrive rotation button.
  • Voice Control: Compatible with Siri and Google Voice Control.
  • Hands-Free Calling: Supports hands-free phone calls.
  • Navigation: Supports various mainstream map applications.

1.2 Compatibility

This multimedia display is compatible with Audi A5 models from 2008 to 2016. Please refer to the table below to identify your car's system type (CAR NO GPS or CAR HAVE GPS MMI 3G) to ensure proper installation and functionality.

Compatible Model List for Audi A5
Figure 1: Compatible Model List for Audi A5
This image displays a table showing compatibility for Audi A5 models (2008-2016) with 'CAR HAVE GPS MMI 3G' and 'CAR NO GPS' systems. Below the table are two car interior images, one for 'CAR NO GPS' and one for 'CAR HAVE GPS MMI 3G', highlighting the differences in the central console.
RoadTop Multimedia Display Features
Figure 2: RoadTop Multimedia Display Overview
This image shows the 8.9-inch and 12.3-inch car multimedia screens installed in an Audi A5 dashboard, highlighting Wireless/Wired CarPlay and Android Auto, 1920*720 Resolution, and 1 Year Warranty.
Before and After Installation Comparison
Figure 3: Before and After Installation
A visual comparison of the Audi A5 dashboard before and after installing the 8.9-inch and 12.3-inch Linux screens, demonstrating the integrated look.

2. Setup

2.1 Product Content

Please ensure all components are present before beginning installation:

  • 8.9 Inch Multimedia Smart Touchscreen (x1)
  • Screen Bracket (x1) (Note: The bracket varies depending on the specific car model.)
  • Power Cable (x1)
  • Iron Frame and Screws (x1)
  • AMI Cable (x1)
  • Airbag Light Adapter Cable (x1)
Product Accessories List
Figure 4: Product Accessories
This image shows the included Power Cable, Iron Frame and Screws, AMI Cable, and Airbag Light Adapter Cable.

2.2 Installation Instructions

Important Safety Note: Ensure the vehicle's ignition is fully turned off before beginning installation. Operating or installing the unit with power on may cause permanent damage to the car audio system.

For users without relevant installation experience, professional assistance is recommended. Alternatively, you may refer to online video guides. A video installation guide is available by scanning the QR code in the original PDF manual.

2.2.1 Cable Connection Chart Overview

Cable Connection Chart
Figure 5: Cable Connection Chart
This diagram illustrates the overall cable connections, including the USB cable (to be placed in the glove box), NEW bracket, Airbag light adapter cable, Linux screen, Head unit power cable, and Automotive gateway cable.

2.2.2 Head Unit Power Cable Connection

  1. Disconnect the original power cable from the head unit.
  2. Attach the original power cable to the new wiring harness.
  3. Connect the new harness to the head unit's power port.
Head Unit Power Cable Connection Diagram
Figure 6: Head Unit Power Cable Connection
A diagram showing the original OEM power cable disconnected from the head unit and connected to the new head unit power cable, which then connects to the head unit.

2.2.3 LVDS Cable Connection

  1. Disconnect the original LVDS cable from the OEM screen.
  2. Connect the original LVDS cable to the new Linux-compatible screen.
  3. Any other cables from behind the OEM screen are not required; please leave them disconnected.
LVDS Cable Connection Diagram
Figure 7: LVDS Cable Connection
This image shows the back of the new Linux screen with the OEM LVDS cable connected to its port.

2.2.4 Gateway Control Module Cable Connection

The gateway control module is located on the passenger side. With the glove box removed, it can be easily accessed.

  1. Locate the original socket of the gateway control module.
  2. Connect the gateway control module cable to the original socket.
  3. Connect the power cable to the gateway control module.
Gateway Control Module Connection Diagram
Figure 8: Gateway Control Module Connection
This diagram shows the location of the gateway control module on the passenger side and how to connect the gateway control module cable and power cable.

2.2.5 Airbag Light Adapter Cable Connection

Connect the included airbag light adapter cable. Pay attention to the correct connection method to avoid the airbag light coming on.

  • Original car double flash interface: Connect the original car emergency light cable.
  • Airbag lamp holder interface: Connect the emergency light board (removable) of the original car and hide it in the car.
  • Modify screen seat interface: Connect the Linux screen's shell emergency light socket.
Airbag Light Adapter Cable Connection Diagram
Figure 9: Airbag Light Adapter Cable Connection
A diagram illustrating the connections for the airbag light adapter cable, showing how to connect to the original car emergency light cable, the emergency light board, and the Linux screen's shell emergency light socket.

2.2.6 MIC Cable Connection

Connect the microphone cable from the back of the Linux screen to the microphone port on the new bracket.

MIC Cable Connection Diagram
Figure 10: MIC Cable Connection
This image shows the MIC cable connecting from the Linux screen to the new bracket.

2.2.7 Clamps Removal Guide

Disassemble the clamps from the OEM bracket and transfer them to the new bracket. Replace the OEM bracket with the new one and secure it to the vehicle.

Clamps Removal Guide Diagram
Figure 11: Clamps Removal
A visual guide demonstrating how to remove clamps from the OEM bracket and attach them to the new bracket.

2.2.8 Iron Frame and Linux Screen Installation

  1. Remove the OEM screen.
  2. Fix the new iron frame using OEM screws.
  3. Fix the Linux screen with new screws onto the iron frame.
Iron Frame and Linux Screen Installation Diagram
Figure 12: Iron Frame and Linux Screen Installation
Images showing the iron frame fixed with OEM screws and the Linux screen fixed with new screws.

2.2.9 AMI Cable Connection (For Equipped Vehicles)

For vehicles equipped with an AMI port, connect the provided AMI cable to enable CarPlay audio through the vehicle's AMI/AUX system. The AMI port can typically be found in the glove box, central console box, or behind media interface doors.

AMI Cable Connection and Port Locations
Figure 13: AMI Cable Connection and Port Locations
This image shows the AMI cable and common locations for the AMI port in the car (glove box, central console, behind media interface doors).

2.3 Basic Software Setup

After physical installation, complete the following basic settings for proper OEM system functionality.

2.3.1 OEM System Resolution Setup

When switching to the OEM interface, screen distortion or icon misalignment may occur due to a mismatch between the original system’s resolution and the display. To resolve this, set the correct resolution in the Linux system settings:

  1. Navigate to Setup > Car Settings > Original Car’s Screen Resolution.
  2. For MMI 3G-equipped vehicles, select the corresponding resolution:
    • If your original car's screen is 5.8 inches, choose MMI 3G 400X240 or MMI 3G 400X240 (2).
    • If your original car's screen is 7 inches, choose MMI 3G 800x480.
OEM System Resolution Setup Screen
Figure 14: OEM System Resolution Setup
Screenshots showing the menu navigation to set the original car's screen resolution, with options like MMI 3G 400X240 and MMI 3G 800x480.

To measure your original car's screen size, refer to the illustration and measure the diagonal length of the active display area. A video guide for this process is available by scanning the QR code in the original PDF manual.

How to Measure Car Screen Size
Figure 15: Measuring Car Screen Size
This image provides a visual guide on how to correctly measure the diagonal length of your car's original screen.

2.3.2 Sound Setup

This unit supports two audio output modes: AMI/AUX Mode and Original Bluetooth Mode (for vehicles with factory Bluetooth audio).

AUX Audio Output Mode
  1. Disconnect any existing Bluetooth connection between your phone and the vehicle.
  2. In the Setup > System menu, set the "Use Car’s BT Channel" function to OFF.
  3. Switch to the OEM MMI3G System.
  4. Navigate to Media.
  5. Select "External audio input" to set the sound input to AUX.
  6. Once "External audio source is active" is shown, touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.
AUX Audio Output Mode Setup
Figure 16: AUX Audio Output Mode Setup
Screenshots guiding through the process of setting the sound input to AUX in the OEM MMI3G system.
AMI Audio Output Mode (for vehicles with AMI function)

If your vehicle has an AMI port, connect the AMI cable as shown in Section 2.2.9.

  1. Disconnect any existing Bluetooth connection between your phone and the vehicle.
  2. In the Setup > System menu, set the "Use Car’s BT Channel" function to OFF.
  3. Switch to the OEM MMI3G System.
  4. Navigate to Media.
  5. Select "External audio input" to set the sound input to AMI.
  6. Touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.
AMI Audio Output Mode Setup
Figure 17: AMI Audio Output Mode Setup
Screenshots demonstrating how to configure the AMI audio output mode in the OEM MMI3G system.
Original Bluetooth Mode (for vehicles with factory Bluetooth audio)

Note: This mode supports CarPlay and Android Auto only. It does not support audio from USB play, AirPlay, or Autolink.

  1. In the Setup > System menu, set the "Use Car’s BT Channel" function to ON.
  2. Switch to the OEM MMI3G System.
  3. Navigate to Media.
  4. Pair your phone with the Car's original Bluetooth.
  5. After pairing, leave the OEM MMI3G system on the Bluetooth audio screen. Then, touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.
Original Bluetooth Mode Setup
Figure 18: Original Bluetooth Mode Setup
Screenshots showing the steps to enable and configure the original Bluetooth mode for audio output.

2.3.3 Reverse Camera Setup

Note: The OEM 360° surround view is exclusively available through the OEM system and is not supported by the new system. Compatibility with aftermarket 360° cameras is also not available.

OEM Camera (Automatic Transmission Vehicles)
  1. In the Setup > Car Settings > Reversing Settings menu, select "Original Camera".
  2. Set the "Reverse Line Detection" function to ON.
OEM Camera (Manual Transmission Vehicles)
  1. You will need to prepare a long electric wire (not included) to connect the vehicle's reversing light to the “BACK” wire on the unit's power harness.
  2. In the Setup > Car Settings > Reversing Settings menu, select "Original Camera".
  3. Set the "Reverse Line Detection" function to ON.
Aftermarket Camera (Automatic Transmission Vehicles)
  1. In the Setup > Car Settings > Reversing Settings menu, select "Aftermarket Camera".
  2. Connect the camera by following the provided wiring diagram.
Aftermarket Camera (Manual Transmission Vehicles)
  1. You will need to prepare a long electric wire (not included) to connect the vehicle's reversing light to the power extension cable of the aftermarket camera.
  2. In the Setup > Car Settings > Reversing Settings menu, select "Aftermarket Camera".
  3. Set the "Reverse Line Detection" function to ON.
Aftermarket Camera Wiring Diagram
Figure 19: Aftermarket Camera Wiring Diagram
A detailed diagram showing how to connect an aftermarket camera, including power and video connections to the main unit and the car's reversing light.

Specification Note: The maximum supported resolution for aftermarket cameras is AHD720P. 1080P is not compatible.

After completing all configurations and confirming the screen is fully operational, please securely reassemble the dashboard and mounting bracket. Enjoy your new display system!

3. Operating Instructions

3.1 CarPlay / Android Auto

Before using CarPlay/Android Auto, ensure the following:

  • Disconnect any existing Bluetooth connection between your phone and the vehicle.
  • Navigate to Setup > Smart Phone > Smart Phone List and set the corresponding CarPlay and Android Auto function to ON.

Wired Connection Steps:

  1. Connect your phone to this device via a high-quality data cable.
  2. Confirm the authorization request on your phone.

Wireless Connection Steps:

  1. Turn on your phone's WiFi.
  2. Turn on your phone's Bluetooth.
  3. Search for and pair with the device Bluetooth named “CAR-XXXX”.
  4. Confirm the Bluetooth pairing.
  5. Allow the CarPlay / Android Auto sync to your phone.
  6. Click “Connect” to use CarPlay / Android Auto function.
Wireless CarPlay / Android Auto Connection Steps
Figure 20: Wireless CarPlay / Android Auto Connection
Screenshots illustrating the steps for connecting wirelessly, including enabling WiFi and Bluetooth, pairing, and confirming sync.

Before using AirPlay or AutoLink, navigate to Setup > Smart Phone > Smart Phone List and set the corresponding AirPlay or AutoLink function to ON.

AirPlay Connection Steps:

  1. Use your iPhone to search for the device WiFi name “CAR-XXXX” and connect to it.
  2. If a password is required, enter "66668888".
  3. Select “AirPlay" in Screen Mirroring from your iPhone.

If your Android phone does not have AutoLink, you need to scan the QR code in the original PDF manual to download the “Autolink Pro” APP before you can use the Android phone's mirror link function.

  1. Open the "Autolink Pro” app from your phone.
  2. Search for the WiFi “CAR-XXXX” and connect it.
  3. Allow "Autolink Pro” to use the mirror link function.

3.3 General Operation

Video 1: Product Demonstration (Audi A4/S4/RS4)
This video demonstrates the key features of the Linux CarPlay screen, including its 1920*720 HD resolution, touch screen functionality, wireless CarPlay and Android Auto support, mobile data usage, OEM MMI control, map navigation, music playback, steering wheel control, voice control, hands-free phone calls, switching to the original vehicle system, Airplay & Autolink, automatic day/night mode switching, and support for OEM/aftermarket rear camera & radar. While shown on an Audi A4/S4/RS4, the features are generally applicable to the Audi A5 model.
Wireless Connectivity Features
Figure 21: Wireless Connectivity Features
This image illustrates the functionality of Wireless/Wired CarPlay, Wireless/Wired Android Auto, AirPlay, and Autolink, showing phone screens mirrored to the car display.
Retained Original Car Settings
Figure 22: Retained Original Car Settings
This image highlights that the system retains original car functions such as OEM Factory System, CD/DVD Player, Steering Wheel Control, Speaker Sound Output, Reversing Camera, and iDrive Rotation Button.

Siri & Google Voice Control

With Siri on CarPlay and Google Assistant on Android Auto, you can keep your eyes on the road and your hands on the steering wheel. Use your voice to get help finding routes, playing your favorite songs, asking for news, or checking the weather.

Hands-Free Phone Call

Make calls, return missed calls, and listen to voicemails directly from the display.

Mobile Music Play

Download different music apps and link them to the homescreen menu for playing popular, rock, hip-hop, or jazz music.

Navigation & Maps

Support for all kinds of mainstream maps allows you to travel one step faster, with features like navigating to stations, finding nearby gas stations, or airports.

Original Menu / CarPlay Menu Switching

The original system and CarPlay menu can be switched freely by one button.

4. Maintenance

No specific maintenance procedures are required for the RoadTop Linux Touch Screen Wireless Carplay Car Multimedia Display beyond general care. To ensure longevity and optimal performance:

  • Keep the screen clean using a soft, lint-free cloth. Avoid harsh chemicals or abrasive materials.
  • Ensure all cable connections remain secure.
  • Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.

5. Troubleshooting

Q: My OEM system screen cannot be displayed normally.

A: Please set the correct resolution in Setup > Settings > Car Settings > Original Screen Resolution. If the issue continues, refer to the video guide available in the original PDF manual for detailed troubleshooting steps.

Q: My car has no sound.

A: Make sure you have properly configured either Bluetooth Audio or AMI/AUX. Only one mode can be active at a time; using both simultaneously may cause no sound. For step-by-step guidance, refer to the video guide available in the original PDF manual.

Q: My reverse camera isn’t functioning.

A: If the reverse camera is not working, first identify:

  1. Whether it is an OEM or aftermarket camera.
  2. Whether your vehicle is automatic or manual transmission.

Then, go to Section 2.3.3 "Reverse Camera Setup" in this manual and follow the corresponding setup steps.

Q: My CarPlay / Android Auto connection keeps dropping.

A: Please try changing to a new WiFi channel in Setup > WiFi > Channel. A video guide for connection issues is available in the original PDF manual.

Q: During calls, the other party reports hearing an echo.

A: Please go to Setup > Audio > Call Echo Cancellation and select "Start Auto AEC" to perform echo cancellation. For optimal call quality, ensure the vehicle interior remains quiet.

Q: Does the product work with the original car microphone?

A: Yes, the original car microphone is supported via original Bluetooth Audio mode. Please refer to the video guide available in the original PDF manual for sound setup instructions.

6. Specifications

AttributeValue
Operating SystemLinux
Display Size8.8”, 12.3”
Resolution1920*720
Touch ScreenYes
Built-in ScreenYes
DinOne Din
Voltage12 V
Item Weight2kg
Item Size39.5*18.4*17.3cm
Special FeaturesBuilt-In Speaker/Microphone, WiFi function, Support steering wheel control, Built-in GPS, Mobile Phone, MP3 players
Digital Media FormatCD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
OSD LanguageChinese (Simplified), Chinese (Traditional), Icelandic, Polish, PERSIAN, Danish, German, Russian, French, Korean, Dutch, Portuguese, Japanese, Turkish, Spanish, English
MaterialMetal + Plastic
CertificationCE
ROM128MB

7. Warranty & Support

7.1 Warranty Information

This product comes with a one-year warranty from the date of purchase.

7.2 Contact Support

For support, contact us via your purchase platform, email, or WhatsApp. To expedite assistance, please include the following information:

  • Your Order ID.
  • Your Vehicle model and year.
  • A detailed description of the issue. Providing a video (preferably showing wiring) or photos is highly recommended for faster resolution.
Help Center Contact Information
Figure 23: Help Center
An image representing the Help Center, indicating channels for customer support.

7.3 Additional Resources

A comprehensive user manual in PDF format is available for download: User Manual (PDF). This PDF contains additional video guides accessible via QR codes for various setup and troubleshooting steps.

8. User Tips

  • Right-Hand Drive Installation: If you have a right-hand drive vehicle, the mounting kit may require extra work to install properly. While it can be a bit challenging, the system is functional once installed.
  • Sound Configuration: Remember that only one audio output mode (Bluetooth Audio, AMI, or AUX) can be active at a time. Ensure you select the correct mode and disable others to avoid sound issues.
  • Screen Resolution: If you experience screen distortion, double-check your OEM system resolution settings in the device menu to match your car's original screen size.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.