1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ANNKE 5MP Wireless Home Camera System. This system includes 5MP cameras with PIR human detection, two-way audio, pan and tilt capabilities, and a 4-channel Homebase for comprehensive home security. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

2. Package Contents
Upon unpacking, please verify that all items listed below are present and in good condition. If any items are missing or damaged, contact customer support.
- ANNKE 5MP Wireless Cameras (2 units)
- ANNKE 4-Channel Homebase (1 unit)
- Power Adapters for Cameras
- Power Adapter for Homebase
- Mounting Screws and Anchors
- Ethernet Cable
- Quick Start Guide (refer to this manual for full details)
3. Product Overview
Familiarize yourself with the components of your ANNKE camera and Homebase:

3.1 Camera Components
- WiFi Antenna: For wireless connectivity.
- Microphone: For audio input during two-way talk and recording.
- Infrared & White Light: For night vision and color night vision.
- 4mm HD Lens: Captures 5MP video.
- PIR Sensor: Passive Infrared sensor for human motion detection.
- Speaker: For audio output during two-way talk and alarm audio.
3.2 Homebase Components
- Channel Indicator Light: Shows status of connected cameras.
- Network Indicator Light: Indicates network connection status.
- Reset Button: For resetting the Homebase.
- Pairing Button: For pairing new wireless cameras.
- Network Port: For wired internet connection.
- Type-C Port: Power input.
- Micro SD Card Slot: For local storage (supports up to 512GB, card not included).
4. Setup Guide
The ANNKE Wireless Home Camera System is designed for simple plug-and-play installation. Follow these steps to set up your system:
4.1 Initial Setup
- Power On Homebase: Connect the Homebase to its power adapter and plug it into an electrical outlet.
- Network Connection: Connect the Homebase to your router using the provided Ethernet cable, or configure Wi-Fi connection through the app after initial setup.
- Power On Cameras: Connect each camera to its respective power adapter and plug them into electrical outlets. Position them in desired monitoring locations.
- Download ANNKE App: Download the official ANNKE app on your smartphone or tablet.

Figure 3: Download the ANNKE App - Add Homebase to App: Follow the in-app instructions to add your Homebase. This typically involves scanning a QR code on the Homebase or manually entering its ID.
- Pair Cameras: The cameras should automatically pair with the Homebase. If not, use the pairing button on the Homebase and follow the app's instructions to manually add each camera.
4.2 Mounting Cameras
Ensure cameras are mounted securely in locations that provide optimal coverage and are within range of the Homebase's wireless signal.

5. Operating Instructions
5.1 Live View and Recording
Access live video feeds and recorded footage through the ANNKE mobile app or PC client. The system supports 5MP high-definition live viewing and recording.
5.2 Pan and Tilt Control
Each camera offers a wide field of view with Pan (horizontal) 350° and Tilt (vertical) 90° capabilities. Use the app to remotely adjust the camera's viewing angle to eliminate blind spots.

5.3 Two-Way Audio
The built-in microphone and speaker enable two-way voice intercom. Speak through the app to communicate with individuals near the camera, or listen to audio from the camera's location.

5.4 Human Motion Detection and Alerts
The PIR sensor detects human motion, triggering alerts and recordings. The system supports smart auto-tracking to follow detected human figures. You can receive push notifications via the app and email alerts.

5.5 Customizable Privacy Mask
Define up to 4 privacy mask areas within the camera's view. These areas will be blacked out in live view and recordings to protect sensitive spaces.

5.6 Night Vision Modes
The cameras offer multiple night vision options:
- IR Night Vision: Provides clear black and white video up to 66ft (20m) in complete darkness.
- Color Night Vision: Provides full-color video up to 33ft (10m) in low-light conditions.
- Human Triggered Full Color Night Vision: The camera can automatically switch to full-color night vision when human motion is detected, illuminating the area with its white lights.

5.7 Storage Options
The Homebase supports local storage via a Micro SD card (up to 512GB, not included) and also offers cloud storage options (subscription may be required).

5.8 Smart Home Integration (Alexa)
The system is compatible with Amazon Alexa, allowing for voice control of certain functions, such as viewing camera feeds on compatible smart displays.

5.9 One-Key Alarm
Activate an instant alarm audio directly from the app to deter intruders or alert others. You can also share access to your devices with family members.

6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your security system.
- Cleaning: Regularly wipe the camera lens and housing with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners.
- Weather Protection: The cameras are IP66 weatherproof, designed to withstand various outdoor conditions. However, avoid directing high-pressure water jets directly at the camera.

Figure 13: IP66 Weatherproof Rating - Firmware Updates: Check the ANNKE app periodically for firmware updates to ensure your system has the latest features and security enhancements.
- Storage Management: If using a Micro SD card, periodically review and manage stored footage to prevent the card from filling up. Cloud storage typically handles this automatically.
7. Troubleshooting
If you encounter issues with your ANNKE system, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No video feed from camera | Camera not powered, out of range, or not paired. | Check power connection. Move camera closer to Homebase. Re-pair camera via the app or Homebase pairing button. |
| Homebase offline | No internet connection, power issue. | Check Homebase power. Verify Ethernet cable connection or Wi-Fi settings. Restart router and Homebase. |
| Motion detection not working | Settings incorrect, PIR sensor obstructed. | Ensure motion detection is enabled in the app. Check PIR sensor for obstructions. Adjust sensitivity settings. |
| Poor night vision quality | Lens dirty, external light interference. | Clean the camera lens. Ensure no strong light sources are directly facing the camera at night. |
| Two-way audio issues | Microphone/speaker blocked, app permissions. | Ensure microphone and speaker are clear. Check app permissions for audio access. Adjust volume settings. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | N54WHF-I51CP |
| Resolution | 5MP |
| Video Compression | H.264+ |
| Video Input | 4 Channel (Homebase) |
| TV System | NTSC, PAL |
| Pan/Tilt Range | Horizontal: 350°, Vertical: 90° |
| Night Vision | Up to 66ft (IR), Up to 33ft (Color) |
| Storage Options | Micro SD Card (up to 512GB), Cloud Storage |
| Weatherproof Rating | IP66 |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Connectivity | Dual WiFi, Wired Ethernet |
| Smart Features | PIR Human Detection, Smart Auto Tracking, Two-Way Audio, Customizable Privacy Mask, One-Key Alarm, Alexa Support |
9. User Tips
While no specific user reviews or Q&A were provided, here are some general tips for optimizing your experience:
- Optimal Wi-Fi Placement: Place the Homebase centrally within your camera network to ensure strong Wi-Fi signals for all cameras.
- Motion Detection Zones: Utilize the customizable motion detection zones to focus on critical areas and reduce false alarms from irrelevant movements (e.g., trees swaying).
- Regular App Checks: Periodically check the ANNKE app for new features, settings, and security updates.
- Secure Passwords: Always use strong, unique passwords for your ANNKE account and Wi-Fi network to protect your system from unauthorized access.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact ANNKE customer support directly. Refer to the official ANNKE website for the most up-to-date contact details and warranty policies.