ANNKE N54WHF+I81BM

Contents

ANNKE 4MP Scalable Wireless Security Camera System User Manual

Model: N54WHF+I81BM

1. Introduction

Thank you for choosing the ANNKE 4MP Scalable Wireless Security Camera System. This system provides advanced surveillance features including 4MP 2K resolution, 100% wire-free operation with solar power, PIR human detection, two-way audio, and pan/tilt capabilities. This manual will guide you through the installation, operation, and maintenance of your security system.

Overview of the ANNKE 4MP Wireless Security Camera System
Figure 1: ANNKE 4MP Wireless Security Camera System Components

2. Package Contents

Before installation, please check the package contents against the list below. If any items are missing or damaged, contact customer support.

Video 1: Unboxing the ANNKE 4MP Scalable Wireless Security Camera System
  • 4CH 5MP Homebase NVR x 1
  • 4MP PT Surveillance Camera x 2
  • Solar Panels x 2
  • Adapter x 1
  • Network Cable x 1
  • User's Manual x 1
  • Positioning Stickers (for solar panel brackets) x 2
  • Positioning Stickers (for camera) x 2
  • Type-C Power Cable x 2
  • Solar Panels Bracket x 2
  • Screw Pack x 4
  • Surveillance Sign x 2

3. Component Identification

3.1 4MP PT Surveillance Camera

Diagram of 4MP PT Surveillance Camera components
Figure 2: Camera Components and Dimensions (Width: 140mm, Height: 123mm)
  • WiFi Antenna: For wireless connectivity.
  • Type-C Port: For power input.
  • Power Switch: To turn the camera on/off.
  • Microphone: For audio input during two-way talk.
  • Lens: Captures video footage.
  • Infrared & White Light: For night vision and spotlight features.
  • PIR Sensor: Passive Infrared sensor for motion detection.
  • TF Card Slot: For local storage (Micro SD card, up to 512GB).
  • Reset Button: To reset the camera to factory settings.
  • Speaker: For audio output during two-way talk and siren.

3.2 4CH 5MP Homebase NVR

Diagram of 4CH 5MP Homebase NVR components
Figure 3: Homebase NVR Components and Dimensions (Width: 95mm, Height: 130mm)
  • Channel Indicator Light: Shows status of connected cameras.
  • Network Indicator Light: Shows network connection status.
  • Reset Button: To reset the NVR.
  • Pairing Button (Sync): For pairing cameras with the Homebase.
  • Speaker: For audio output.
  • Network Port: For wired network connection.
  • Type-C Port: For power input.
  • Micro SD Card Slot: For local storage (up to 512GB).

4. Setup

4.1 Initial Power-Up

  1. Connect the Homebase NVR to power using the provided adapter.
  2. Connect the Homebase NVR to your router using the provided network cable for initial setup.
  3. Power on each camera using its power switch. Ensure the cameras are fully charged or connected to their solar panels.

4.2 Camera Pairing

The cameras should automatically pair with the Homebase NVR upon initial power-up. If not, follow these steps:

  1. Press the 'Sync' button on the Homebase NVR.
  2. Within 30 seconds, press the 'Reset' button on each camera.
  3. The camera's indicator light will show pairing status. Once paired, the camera feed will appear on the connected display or app.

4.3 App Installation and Configuration

  1. Download the 'Annke Sight' app from your smartphone's app store.
  2. Create an account or log in.
  3. Follow the in-app instructions to add your Homebase NVR and cameras.
  4. Configure Wi-Fi settings (supports 2.4/5GHz dual-band Wi-Fi).

4.4 Physical Installation

The cameras are IP65 weatherproof and designed for both indoor and outdoor use. They are 100% wire-free with solar power supply.

Solar power supply for camera
Figure 4: Solar Power Supply for Wire-Free Operation
  1. Mounting Location: Choose a location with good Wi-Fi signal and ample sunlight for the solar panels. Ensure the camera has a clear view of the area you wish to monitor.
  2. Solar Panel Installation: Use the provided positioning stickers and screw pack to securely mount the solar panels. Connect the solar panel cable to the camera's Type-C port.
  3. Camera Installation: Use the provided positioning stickers and screw pack to mount the camera stands. Attach the cameras to the stands. The cameras offer 270° horizontal and 90° vertical pan and tilt for wide coverage.

5. Operating Instructions

5.1 Live View and Recording

  • Open the 'Annke Sight' app to view live feeds from your cameras.
  • The system records in 4MP (2560x1440) resolution, providing clear 2.5K footage.
  • Recordings can be stored locally on a Micro SD card (up to 512GB) in the Homebase NVR or camera, or optionally on cloud storage.

5.2 Night Vision

The cameras feature true day and night continuous protection with advanced spotlight for vivid color night vision and clear IR night vision up to 15m.

2.5K Full Color Night Vision
Figure 5: 2.5K Full Color Night Vision (1/3" Sensor, 6 LEDs, 4mm Lens)

5.3 Motion Detection and Alerts

The system utilizes PIR Humanoid Detection for instant and accurate alerts.

Human Motion Detection and Alerts
Figure 6: Human Motion Detection with App Push and Email Alerts
  • When human motion is detected, you will receive instant alerts via app push notifications and email with screenshots.
  • The cameras can also trigger sound and light alarms (spotlight and siren) to deter intruders.

5.4 Two-Way Audio

The built-in microphone and speaker allow for real-time two-way voice intercom.

Two-Way Talk feature
Figure 7: Two-Way Talk for Easy Real-Time Communication
  • Use the app to listen to audio from the camera's location.
  • Speak through the app to communicate with individuals near the camera.

5.5 Pan and Tilt Control

Control the camera's viewing angle remotely via the app. The cameras offer 270° horizontal and 90° vertical rotation, eliminating blind spots.

Wide Coverage Pan and Tilt
Figure 8: Wide Coverage with 270° Horizontal, 90° Vertical Pan and Tilt

5.6 Smart Home Integration

The system supports Alexa for convenient voice control.

Work with Alexa
Figure 9: Alexa Integration for Voice Control
  • Connect your ANNKE system to your Alexa-enabled devices.
  • Use voice commands to view camera feeds on compatible smart displays.

6. Maintenance

  • Solar Panels: Regularly clean the surface of the solar panels to ensure maximum charging efficiency. Dust, dirt, or debris can reduce power generation.
  • Camera Lens: Gently clean the camera lens with a soft, dry cloth to maintain clear image quality. Avoid abrasive materials or harsh chemicals.
  • Battery: The cameras are equipped with a 9000mAh battery. While solar panels provide continuous charging, ensure the panels are positioned to receive adequate sunlight. Monitor battery levels via the app.
  • Storage: Periodically review and manage recordings stored on the Micro SD card or cloud. Delete unnecessary footage to free up space.
  • Firmware Updates: Check the 'Annke Sight' app regularly for firmware updates to ensure optimal performance and security.

7. Troubleshooting

7.1 No Power/Camera Not Turning On

  • Ensure the camera's power switch is in the 'ON' position.
  • Check the Type-C power cable connection to the camera and solar panel.
  • Verify the solar panel is receiving sufficient sunlight. If indoors, ensure the camera battery is charged via the Type-C port.
  • If the battery is completely drained, it may take some time to power on after connecting to a power source.

7.2 No Video Feed/Offline Camera

  • Check the Wi-Fi connection of your Homebase NVR and ensure it's connected to your router.
  • Verify the camera is within range of the Homebase NVR's Wi-Fi signal.
  • Ensure the camera is powered on and its indicator light is stable.
  • Try restarting the camera by turning it off and on, or by pressing the reset button.
  • If the issue persists, re-pair the camera with the Homebase NVR (refer to Section 4.2).

7.3 Poor Image Quality

  • Clean the camera lens.
  • Ensure there are no obstructions in the camera's field of view.
  • Check your network bandwidth. A weak Wi-Fi signal can affect streaming quality. The system supports 2.4/5GHz dual-band Wi-Fi for better stability.

7.4 Motion Detection Not Working

  • Ensure PIR motion detection is enabled in the 'Annke Sight' app settings.
  • Adjust the sensitivity settings for the PIR sensor.
  • Verify the camera's placement. The PIR sensor works best when motion crosses its field of view rather than moving directly towards it.

7.5 Two-Way Audio Issues

  • Check the microphone and speaker settings in the 'Annke Sight' app.
  • Ensure there are no physical obstructions blocking the camera's microphone or speaker.
  • Verify your smartphone's volume and microphone permissions for the app.

8. Specifications

FeatureSpecification
Brand NameANNKE
Model NumberN54WHF+I81BM
Resolution4MP (2560x1440)
NVR Channels4CH 5MP Homebase
Camera TypePT (Pan/Tilt) Surveillance Camera
Pan/Tilt RangeHorizontal: 270°, Vertical: 90°
ConnectivityWireless (2.4/5GHz Dual-Band Wi-Fi)
Power SupplySolar Powered (9000mAh Battery)
Weatherproof RatingIP65
Operating Temperature-20°C to 60°C (-4°F to 140°F)
Night VisionFull Color Night Vision (Spotlight), IR Night Vision (up to 15m)
DetectionPIR Humanoid Detection
AudioTwo-Way Talk (Built-in Mic & Speaker)
StorageMicro SD Card (up to 512GB), Cloud Storage (Optional)
Smart IntegrationAlexa Support
TV SystemNTSC, PAL
OriginMainland China

9. User Tips

  • Optimal Solar Charging: Position solar panels in areas that receive direct sunlight for the majority of the day to ensure continuous power. Avoid shaded areas.
  • Wi-Fi Signal Strength: For best performance, ensure your Homebase NVR and cameras are within a strong Wi-Fi signal range. Consider using a Wi-Fi extender if necessary, especially for outdoor cameras.
  • PIR Placement: For accurate human detection, mount cameras at an angle where people will walk across the detection zone rather than directly towards the camera. This maximizes the effectiveness of the PIR sensor.
  • Regular Checks: Periodically check the camera's live feed and recorded events through the app to ensure the system is functioning as expected.
  • Secure Mounting: Double-check all mounting screws and brackets regularly, especially after severe weather, to ensure cameras and solar panels remain securely in place.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official ANNKE website or contact their customer service directly. Keep your purchase receipt for warranty claims.

© 2024 ANNKE. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.