MESTEK WM700D

Contents

MESTEK WM700D Moisture Meter User Manual

Model: WM700D

1. Introduction

The MESTEK WM700D is a versatile 2-in-1 moisture meter designed for accurate measurement of moisture content in various materials such as wood, walls, concrete, masonry, and gypsum. It features both a non-destructive ball probe and a pin-type probe, allowing for flexible and precise measurements. The device also supports ambient temperature and humidity measurement, includes an alarm function, data retention, and a clear color LCD display for easy readability.

WM700D Pinless Moisture Meter with ball probe and pin-type probe, showing its 2-in-1 functionality and key features like depth, range, and classification.
WM700D Pinless Moisture Meter with ball probe and pin-type probe, highlighting its 2-in-1 functionality and key features.

2. Package Contents

Upon opening the package, please verify that all items listed below are present and in good condition:

  • 1 x WM700D Spherical Humidity Hygrometer (Main Unit)
  • 1 x Pin Type Test Line (External Pin Probe)
  • 1 x Screwdriver
  • 1 x User Manual (available in German, English, Italian, French, Spanish)
  • 1 x Storage Bag
Video: Unboxing and initial overview of the WM700D Moisture Meter, showing included accessories.
Image showing the WM700D Moisture Meter and its complete package contents, including the main unit, pin-type probe, screwdriver, user manual, and storage bag.
Complete package contents of the WM700D Moisture Meter.

3. Product Overview

The WM700D features a robust design with a clear color LCD screen and intuitive controls. It integrates two primary measurement methods: a non-destructive spherical (ball) sensor and a pin-type probe for direct contact measurements.

3.1 Components

Detailed diagram of the WM700D Moisture Meter, labeling its components including the non-destructive sensor, color screen, control buttons, and pin probe connection.
Detailed diagram of the WM700D Moisture Meter components.
  1. Spherical sensor (Non-destructive Moisture sensor)
  2. Probe plug
  3. Conversion socket for probe sensor
  4. Environmental temperature and humidity sensor
  5. Display (Color screen)
  6. Function keys (SET, MEAS, HOLD, Power, Digital subtraction, Digital addition)
  7. Remote probe sensor (Pin-type test line)
  8. Probe protection cover
  9. Test hole for spot check

3.2 Button Functions

Diagram showing the buttons on the WM700D Moisture Meter with a table explaining the function of each button and its corresponding symbol.
Button functions on the WM700D Moisture Meter.
SymbolDescription
Power switch symbolPower switch
SETSet up
MEASMeasure
HOLDData hold
Wood material symbolWood material selection
Brick wall material symbolBrick wall material selection
▼Digital subtraction (for alarm value adjustment)
▲Digital addition (for alarm value adjustment)

3.3 Screen Display Symbols

Table explaining the various symbols and indicators shown on the WM700D Moisture Meter's screen, including automatic shutdown, battery status, measurement types, and moisture levels.
Explanation of screen display symbols.
SymbolDescription
Automatic shutdown indication symbolAutomatic shutdown indication
Battery under-voltage indication symbolBattery under-voltage indication
Analog display symbolAnalog display
Temperature symbolTemperature
Humidity symbolHumidity
Spherical sensor symbolSpherical sensor
Probe sensor symbolProbe sensor
Brick wall symbolBrick wall
Wood symbolWood
ARELRelative measurement
HOLDData locking
DRYDry moisture level
RISKRisk moisture level
WETWet moisture level
°CDegree Celsius
°FFahrenheit
%Percentage

4. Specifications

Detailed technical specifications table for the WM700D Moisture Meter, covering display type, sensor details, measurement ranges, precision, resolution, operation current, auto-shutdown, environmental conditions, and power supply.
Technical specifications of the WM700D Moisture Meter.
FeatureDescription
ProductPinless moisture meter
DisplayVA reverse display color screen
Spherical Sensor Measurement Depth0-40mm
Remote Probe Cable Length40 inches (101 cm)
Remote Probe Conversion Plug3.5mm
Remote Probe Electrode Length10mm
Pin Probe Measurement Range (Wood)6% - 60%
Pin Probe Measurement Range (Brick Wall)1.5% - 33%
Spherical Sensor Measurement Range0-100/REL
Ambient Temperature Range-10-60°C (14-140°F)
Ambient Humidity Range0-100%RH
Spherical Sensor Precision±5%
Ambient Temperature Precision±2.0°C/4°F
Ambient Humidity Precision±5%RH
Spot Check Test Hole Precision±5%
Measurement Rate0.5 seconds
Operation CurrentAbout 40mA
Automatic Shut-downAbout 30 minutes of no operation
Working Environment0-50°C / 0-70%RH
Storage Environment-20-60°C / humidity ≤80%RH
Power Supply3 x 1.5V AAA batteries (not included)
Weight210g
Dimensions195 x 73 x 33mm

5. Setup

5.1 Battery Installation

  1. Locate the battery compartment on the back of the device.
  2. Use the provided screwdriver to open the battery compartment cover.
  3. Insert 3 x 1.5V AAA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover and secure it with the screw.

5.2 Connecting the Pin Probe

For pin-type measurements, connect the remote pin probe to the 3.5mm conversion socket located on the top right of the main unit. Ensure the connection is secure.

6. Operating Instructions

6.1 Power On/Off

Press the power switch button (Power switch symbol) to turn the device on or off. The device will automatically shut down after approximately 30 minutes of inactivity to conserve battery life.

6.2 Measurement Modes

Diagram illustrating the two measurement methods of the WM700D: non-destructive measurement using the ball probe and plug-in measurement using the pin probe, with their respective ranges and depths.
Non-destructive and Pin-type measurement methods.

6.2.1 Non-Destructive Measurement (Ball Probe)

This method is ideal for quick scans and surfaces where you do not want to leave pin marks. The spherical sensor measures moisture up to a depth of 0-40mm.

  1. Ensure the pin probe is disconnected.
  2. Place the spherical sensor directly onto the surface of the material to be measured.
  3. The moisture reading will be displayed on the screen in REL (Relative) units (0-100).
  4. The color analog bar and DRY/RISK/WET indicators will provide a visual interpretation of the moisture level.

6.2.2 Pin-Type Measurement (External Pin Probe)

For more precise measurements, especially in wood and brick, use the external pin probe.

  1. Connect the pin probe to the 3.5mm socket on the main unit.
  2. Gently push the pins into the material.
  3. The moisture reading will be displayed as a percentage (%).
  4. Use the material selection buttons (Wood Wood material symbol or Brick wall Brick wall material symbol) to select the appropriate material for accurate readings.

6.3 Calibration

Image illustrating the calibration process for the WM700D Moisture Meter, showing the 'CAL' screen and instructions to press the 'M/A' button for quick calibration.
Calibration process for the WM700D.

To ensure accurate measurements, especially for the non-destructive mode, perform a quick calibration:

  1. After powering on the device, ensure the spherical sensor is in the air (not touching any surface).
  2. Briefly press the 'MEAS' button. The screen will display 'CAL' and complete calibration within 3 seconds.

6.4 Data Hold (HOLD)

Press the 'HOLD' button to freeze the current measurement on the display. Press it again to release and resume live readings.

6.5 MAX/MIN Record

Image demonstrating the WM700D's ability to record maximum and minimum moisture values during testing, shown with various materials like plaster, brick, marble, and wood.
Recording MAX and MIN values during testing.

The device can record the maximum and minimum moisture values during a test session. Refer to the display symbols for MAX/MIN indicators.

6.6 Moisture Alarm Function

Image demonstrating the WM700D's moisture alarm function, showing the meter in use on wood with 'DRY', 'RISK', and 'WET' indicators.
Moisture alarm function with DRY/RISK/WET indicators.

The WM700D features an alarm function that indicates moisture levels as DRY, RISK, or WET. The critical alarm values can be set for different materials using the 'SET' button and the digital addition/subtraction buttons (▲/▼).

6.7 Ambient Temperature and Humidity Measurement

The device includes an environmental temperature and humidity sensor (No. 4 in the Product Overview diagram) to provide ambient readings alongside moisture measurements.

6.8 Non-Destructive Measurement Guidelines

Detailed explanation of the WM700D's display elements and important guidelines for non-destructive moisture measurement, including material-specific humidity ranges and common errors to avoid.
Guidelines for non-destructive moisture measurement and material-specific humidity ranges.

For accurate non-destructive measurements:

  • Keep fingers below the screen and clear of the pad scanning area to avoid inaccurate readings.
  • Ensure there is no metal within 5cm of the material being measured. Metal, wires, and pipes can influence readings.
  • The subject thickness should be up to 2cm for optimal results.

Humidity Status for Building Materials:

Building MaterialHumidity Range (Unit)Humidity Status
Wood<50DRY
Wood50-80RISK
Wood>80WET
Cement25-50DRY
Cement>50RISK
Plaster30-60DRY
Plaster>60WET

7. User Tips

  • For consistent readings, always measure in multiple spots on the material.
  • When using the pin probe, ensure the pins are fully inserted into the material for the most accurate contact.
  • Keep the spherical sensor clean and free of debris to maintain non-destructive measurement accuracy.
  • If readings seem inconsistent, recalibrate the device as described in section 6.3.

8. Maintenance

  • Keep the device clean and dry. Use a soft, damp cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
  • Store the device in its protective storage bag when not in use to prevent damage.
  • If the device will not be used for an extended period, remove the batteries to prevent leakage.
  • Regularly check the pin probe for any damage or bending. Replace if necessary to ensure accurate readings.

9. Troubleshooting

  • No Power: Check battery installation and ensure batteries are not depleted. Replace if necessary.
  • Inaccurate Readings: Perform calibration as described in section 6.3. Ensure proper contact with the material and that no metal objects are interfering with non-destructive measurements. Verify the correct material type is selected for pin-type measurements.
  • Display Not Working: Check battery level. If the issue persists, contact customer support.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official MESTEK website or contact your retailer. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.