ECHTPower Phantom Smart Game Controller User Manual

Introduction

This manual provides comprehensive instructions for the ECHTPower Phantom Smart Game Controller (Model EP05WH). It covers the packing list, compatibility, specifications, button layout, setup, connection procedures, calibration, advanced features like turbo and back button customization, and important safety information. Please read this manual thoroughly before using your controller to ensure optimal performance and longevity.

Packing List

The package should contain the following items:

• Wireless Controller x1
• Charging Cable x1
• Receiver x1
• Instruction Manual x1

Compatibility

The ECHTPower Phantom Smart Game Controller is designed for broad compatibility across various gaming platforms:

• PC
• Nintendo Switch (including Switch 2, Switch OLED, Switch Lite)
• Android devices (phones, tablets, Android TV)
• iOS devices
• Tesla 3/Y/X/S
• Steam Deck

Note: This controller is NOT compatible with Xbox consoles.

Specifications

Controller Layout and Button Map

Familiarize yourself with the buttons and components of your controller:

• Display Screen: Central screen for settings and information.
• /SE Button: Select/Share button.
• /ST Button: Start/Menu button.
• Left Joystick: Left analog stick.
• Right Joystick: Right analog stick.
• ABXY Buttons: Action buttons (Y, X, B, A).
• Turbo Button: For activating turbo functions.
• Screen Button: For screen-related functions.
• Home Button: Returns to home screen/menu.
• Power Switch: On/Off switch.
• D-Pad / Menu Buttons: Directional pad for navigation.
• R1/L1 Joysticks: Shoulder buttons.
• R2/L2 Joysticks: Analog triggers.
• TYPE-C Charging Port: For charging the controller.
• M1/M2 Back Buttons: Programmable back buttons.
• 3.5 Audio Jack: For headphones.
• Reset Button: Pinhole for resetting the controller.

Instructions for Use

Initial Setup and Charging

Before first use, connect the charging cable (Type-C) to the controller and a power source (5V/1A) to fully charge the controller. The battery capacity is 1000mAh.

Connecting to Nintendo Switch

1. Turn the power switch to "ON".
2. Press and hold the HOME button for 3 seconds to enter the controller's menu.
3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
4. Select "SW" (Switch mode) and press R1 to confirm. Press L1 to go back if needed.
5. Wait for the startup animation. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu again.
6. On the menu screen, navigate to "Pairing" and press R1 to confirm.
7. On your Nintendo Switch console, go to "Controllers" > "Change Grip/Order" and complete the pairing.

Wireless Receiver Connection (PC - XINPUT)

1. Turn the power switch to "ON".
2. Press and hold the HOME button for 3 seconds to enter the controller's menu.
3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
4. Select "Receiver" and press R1 to confirm. Press L1 to go back if needed.
5. Wait for the startup animation. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu again.
6. On the menu screen, navigate to "Pairing" and press R1 to confirm.
7. Insert the receiver into an available USB port on your PC.
8. Press and hold the button on the receiver for 1 second to complete the pairing.

Wireless Receiver Connection (PC - DINPUT)

If connected to PC in Xinput mode via the receiver, you can switch to Dinput mode:

• Press and hold the `≡` (ST) and `D` (D-Pad Down) buttons simultaneously for 5 seconds to switch the controller to Dinput mode.
• To switch to Switch Pro mode, press the same button combination (`≡` + `D`) again for another 5 seconds.

Bluetooth PC Connection

1. Turn the power switch to "ON".
2. Press and hold the HOME button for 3 seconds to enter the controller's menu.
3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
4. Select "PC" and press R1 to confirm. Press L1 to go back if needed.
5. Wait for the startup animation. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu again.
6. On the menu screen, navigate to "Pairing" and press R1 to confirm.
7. On your PC, enable Bluetooth in the settings and select "Xbox Wireless Controller" from the list of available devices to complete pairing.

Wired PC Connection

Turn the power button to "ON" and connect the controller directly to your computer using the included USB Type-C cable. The controller will automatically configure itself for PC compatibility upon detection.

Bluetooth Phone Connection (iOS/Android)

1. Turn the power switch to "ON".
2. Press and hold the HOME button for 3 seconds to enter the controller's menu.
3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
4. Select "Phone" and press R1 to confirm. Press L1 to go back if needed.
5. Wait for the startup animation. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu again.
6. On the menu screen, navigate to "Pairing" and press R1 to confirm.
7. On your smartphone, enable Bluetooth in the settings and select "Xbox Wireless Controller" from the list of available devices to complete pairing.

Language Selection

1. Turn the power switch to "ON".
2. Press and hold the HOME button for 3 seconds to enter the controller's menu.
3. Use the D-PAD to navigate to the "Language" option, then press R1 to confirm.
4. Select your preferred language and press R1 to confirm. Press L1 to go back to the main menu.

Controller Calibration

To ensure optimal joystick and trigger performance, calibrate your controller:

1. With the controller OFF, simultaneously press and hold the A and X buttons. While holding them, switch the controller to the "ON" position.
2. The controller will enter calibration mode, indicated by red/blue LED lights flashing at a rate of 2 times per second.
3. In calibration mode:
   • Rotate both the left and right joysticks at normal speed through 2-3 complete rotations.
   • Press both the left and right triggers (L2, R2) at standard pressure for 2-3 full presses in linear mode.
4. After completing these steps, place the controller flat on a stable surface and press the `≡` (ST) button to finalize the calibration process.
5. Upon successful calibration, the LED flashing will cease, and the controller will automatically return to its main interface.

Turbo Function Settings

The A, B, X, Y, L1, L2, R1, and R2 buttons can be configured with turbo functionality.

• Manual Turbo: Press and hold the Turbo button simultaneously with any action button to activate manual turbo mode. The selected button will auto-fire when pressed and stop when released.
• Auto Turbo: Press the Turbo button plus the same action button again to enable automatic turbo. The button will continuously auto-fire until pressed once to toggle on/off.
• Disable Turbo: Press the Turbo button with the same action button a third time to completely cancel the turbo function for that key.
• Clear All Turbo: Hold the Turbo button for 3 seconds to disable all turbo configurations. This will be indicated by grayed-out icons on the screen.

Turbo Speed Adjustment:

• Turbo + D-Pad Up: Fast speed (16 presses/second)
• Turbo + D-Pad Right: Medium speed (8 presses/second)
• Turbo + D-Pad Down: Slow speed (4 presses/second)

Back Button Customization (M1/M2)

You can map the following controls to the rear buttons (M1, M2): A, B, X, Y, L1, L2, R1, R2, D-pad directions (Up/Down/Left/Right), L3, and R3.

1. Turn the power button to "ON".
2. Press and hold the HOME button for 3 seconds to access the menu.
3. Navigate to "Macro" using the D-Pad, then press R1 to confirm.
4. Press R1 again to choose either M2 or M1.
5. Record the desired button inputs. After completing the recording, press the `≡` (ST) button to confirm and save.
6. Once successfully saved, press the `/SE` button to exit. The settings will be ready for normal use.

To reset back buttons:

1. Repeat the menu navigation process to "Macro" and select M1 or M2.
2. Hold the target back button (M1/M2) to clear its configuration.
3. Save with `≡` (ST) and exit with `/SE`.

Light Adjustment (RGB Lights)

The controller features adjustable RGB lights.

1. Turn the power button to "ON".
2. Press and hold the HOME button for 3 seconds to access the menu.
3. Select either "Lighting Mode" or "Lighting Brightness" using the D-Pad to adjust the built-in LED effects or illumination intensity.

Vibration Adjustment

Adjust the vibration intensity to your preference:

1. Turn the power button to "ON".
2. Press and hold the HOME button for 3 seconds to access the menu.
3. Navigate to "Motor Settings" using the D-Pad, press R1 to confirm.
4. Adjust to your preferred vibration intensity.

Volume Adjustment (Headphone Output)

If using headphones with the 3.5mm audio jack:

1. Turn the power button to "ON".
2. Press and hold the HOME button for 3 seconds to access the menu.
3. Navigate to the "Volume" option using the D-Pad.
4. Adjust the headphone output level.

Resetting the Controller

There are two methods to reset the controller:

• Method 1 (Physical Reset): Use a pointed tool (like a paperclip) to press the reset pinhole located on the back of the controller. This will restore the device to its original settings.
• Method 2 (Software Reset):
  1. Turn the power button to "ON".
  2. Press and hold the HOME button for 3 seconds to access the menu.
  3. Navigate to "Reset" using the D-Pad.
  4. Press and hold the R1 button for 3 seconds to complete the reset.

Troubleshooting

If you encounter issues with your controller, try the following steps:

• Controller not turning on: Ensure the controller is fully charged. Connect it to the charging cable and allow it to charge for at least 30 minutes before attempting to power it on again.
• Connection issues:
  • For wireless connections (Bluetooth or 2.4G receiver), ensure the controller is in the correct mode for your platform (Switch, PC, Phone).
  • Ensure the receiver is properly inserted into the USB port for 2.4G connections.
  • For Bluetooth, ensure Bluetooth is enabled on your device and the controller is selected from the available devices.
  • Try re-pairing the controller following the specific connection instructions for your platform.
• Joystick drift or inaccurate input: Perform a controller calibration as described in the "Controller Calibration" section.
• Buttons not responding: Check if the buttons are physically stuck. If not, try resetting the controller using either method described in the "Resetting the Controller" section.
• Turbo function not working: Ensure the turbo function is correctly set up for the desired button and not disabled. Refer to the "Turbo Function Settings" section.
• No vibration: Check the "Vibration Adjustment" settings to ensure vibration is enabled and set to a desired intensity.
• No sound from headphones: Verify the "Volume Adjustment" settings and ensure your headphones are properly connected to the 3.5mm audio jack.
• Controller unresponsive: If the controller becomes unresponsive, perform a physical reset using the pinhole on the back.

If problems persist after trying these steps, please contact customer support.

Maintenance

To ensure the longevity and optimal performance of your ECHTPower Phantom Smart Game Controller, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the controller. Do not use harsh chemicals, cleaning solvents, or strong detergents.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: Avoid fully discharging the battery frequently. If storing for an extended period, charge the controller to about 50% and recharge every few months to prevent deep discharge.
• Avoid Drops: Do not drop the controller or subject it to strong impacts.
• Liquid Exposure: Do not expose the controller to liquids. If it gets wet, turn it off immediately and allow it to dry completely before attempting to use it again.
• Disassembly: Do not attempt to disassemble or modify the controller. This will void the warranty and may cause damage.

Warranty and Support

Contact Information

For support or inquiries, please use the following contact details:

• Tel: 0755-21010839
• Email: service@echtpower.com
• Web: www.echtpower.com
• Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
• Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen

Declaration of Conformity

Model: EP05

The product conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that the EP05 radio equipment conforms to the Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

The full text of the EU Declaration of Compliance can be found on: www.echtpower.com

The product also conforms to UK standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that the EP05 radio equipment conforms to the Directive EN IEC 62368-1:2020; BS EN 50663:2017, BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

The full text of the UKCA Declaration of Compliance can be found on: www.echtpower.com

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC ID: 2BDA4STK-7052P

Precautions

• Do not expose it to liquid.
• Do not disassemble it.
• Avoid dropping it.
• Avoid extremely high or low temperatures.

The symbol (crossed-out wheeled bin) means the product should not be disposed of with household waste but be brought to an appropriate collection point to enable recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.

The number 10 on the product indicates that the environmental protection use period of the product under normal use conditions is 10 years.