1. Product Overview
This manual provides detailed instructions for the installation, setup, and operation of your new Road Top 12.3-inch Linux Screen Car Multimedia Display. This system is designed to upgrade your Audi A4 or A5 (2016-2019 models with MIB/MIB2 system) with advanced multimedia features including Wireless CarPlay, Android Auto, Airplay, and Autolink functions.
Product Contents
- Multimedia Smart Touchscreen (x1)
- Screen Bracket (x1) (Note: The bracket varies depending on the specific vehicle model.)
- Power Cable (x1)
- AMI Cable / Screw Set (x1)


2. Installation Instructions
Important Safety Note: Ensure the vehicle's ignition is fully turned off before beginning installation. Operating or installing the unit with power on may cause permanent damage to the car audio system.
For users without relevant installation experience, professional assistance is recommended. Alternatively, you may refer to online video guides. Please contact support if you require further assistance.
2.1 Cable Connection Chart
The following outlines the general cable connections. Refer to the detailed steps below for specific instructions.

2.2 Head Unit Power Cable Connection
- Disconnect the original power cable from the vehicle's head unit.
- Attach the original power cable to the new wiring harness provided with the multimedia display.
- Connect the new wiring harness to the head unit's power port.

2.3 LVDS Cable Connection
- Disconnect the original LVDS cable from the OEM screen.
- Connect the original LVDS cable to the new Linux-compatible screen.
- Any other cables from behind the OEM screen are not required; please leave them disconnected.

2.4 AMI Cable Connection (For Equipped Vehicles)
For vehicles equipped with an AMI port, connect the provided AMI cable to enable CarPlay audio through the vehicle's AMI/AUX system.

Where to find the AMI port?
- In the glove-box
- In the central console box
- Behind media interface doors

3. Basic Setup
After installation, complete the following basic settings to ensure proper functionality of the OEM system.
3.1 OEM System Resolution Setup
When switching to the OEM interface, screen distortion or icon misalignment may occur due to a mismatch between the original system's resolution and the display. To resolve this, set the correct resolution in the Linux system settings:
- Navigate to:
Setup>Car Settings>Original Car's Screen Resolution. - Select the appropriate resolution based on your original car's screen size:
- If your original car's screen is 5.8 inches, choose
MIB / MMI 3G 400X240. - If your original car's screen is 7 inches or 8 inches, choose
MIB / MMI 3G 800x480. - If your original car's screen is 8.3 inches, choose
MIB 1024X480.

3.2 Sound Setup
This unit supports two audio output modes: AMI/AUX Mode and Original Bluetooth Mode (for vehicles with factory Bluetooth audio).
3.2.1 AUX Audio Output Mode
- Disconnect any existing Bluetooth connection between your phone and the vehicle.
- In the
Setup>Systemmenu, set the "Use Car's BT Channel" function to OFF. - Switch to the OEM MIB System:
- Navigate to
Media. - Select "External audio player" to set the sound input to AUX.
- Once "The external audio player is selected" is shown, touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.
3.2.2 AMI Audio Output Mode (only for vehicles with AMI function)
If your vehicle has an AMI port, ensure the AMI cable is connected as shown in Section 2.4.
- Disconnect any existing Bluetooth connection between your phone and the vehicle.
- In the
Setup>Systemmenu, set the "Use Car's BT Channel" function to OFF. - Switch to the OEM MIB System:
- Navigate to
Media. - Select "External audio player" to set the sound input to AMI.
- Touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.
3.2.3 Original Bluetooth Mode (for vehicles with factory Bluetooth audio)
Note: This mode supports CarPlay and Android Auto only. It does not support audio from USB play, AirPlay, or Autolink.
- In the
Setup>Systemmenu, set the "Use Car's BT Channel" function to ON. - Switch to the OEM MIB System:
- Navigate to
Media. - Pair your phone with the Car's original Bluetooth.
- After pairing, leave the OEM MIB system on the Bluetooth audio screen. Then, touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.
3.3 Reverse Camera Setup
Note: The OEM 360° surround view is exclusively available through the OEM system and is not supported by the new system. Compatibility with aftermarket 360° cameras is also not available. Maximum supported resolution for aftermarket cameras is AHD720P; 1080P is not compatible.
3.3.1 OEM Camera (Automatic Transmission Vehicles)
- In the
Setup>Car Settings>Reversing Settingsmenu, select "Original Camera". - Set the "Reverse Line Detection" function to ON.
3.3.2 OEM Camera (Manual Transmission Vehicles)
- You will need to prepare a long electric wire (not included) to connect the vehicle's reversing light to the "BACK" wire on the unit's power harness.
- In the
Setup>Car Settings>Reversing Settingsmenu, set "Camera Type" to "Original Camera". - Set the "Reverse Line Detection" function to ON.
3.3.3 Aftermarket Camera (Automatic Transmission Vehicles)
- In the
Setup>Car Settings>Reversing Settingsmenu, select "Aftermarket Camera". - Connect the camera by following the provided wiring diagram.

3.3.4 Aftermarket Camera (Manual Transmission Vehicles)
- You will need to prepare a long electric wire (not included) to connect the vehicle's reversing light to the power extension cable of the aftermarket camera.
- In the
Setup>Car Settings>Reversing Settingsmenu, set "Camera Type" to "Aftermarket Camera". - Set the "Reverse Line Detection" function to ON.
After completing all configurations and confirming the screen is fully operational, securely reassemble the dashboard and mounting bracket. Enjoy your new display system!
4. Operating Instructions
This section details the operation of the various multimedia functions.
4.1 CarPlay / Android Auto
Before using CarPlay/Android Auto:
- Disconnect any existing Bluetooth connection between your phone and the vehicle.
- Navigate to
Setup>Smart Phone>Smart Phone Listand set the corresponding CarPlay and Android Auto function to ON.

Wired CarPlay / Android Auto Connection Steps:
- Connect your phone to this device via a high-quality data cable.
- Confirm the authorization request on your phone.
Wireless CarPlay / Android Auto Connection Steps:
- Turn on your phone's WiFi.
- Turn on your phone's Bluetooth.
- Search for and pair with the device Bluetooth named "CAR-XXXX".
- Pair the Bluetooth when prompted.
- Allow the CarPlay / Android Auto sync to your phone.
- Click "Connect" to use CarPlay / Android Auto function.

4.2 AirPlay / AutoLink
Before using AirPlay/AutoLink, navigate to Setup > Smart Phone > Smart Phone List and set the corresponding AirPlay or AutoLink function to ON.
4.2.1 AirPlay (for iOS phones)
- Use your iPhone to search for the device WiFi name "CAR-XXXX" and connect to it.
- If a password is required, enter "66668888".
- Select "AirPlay" in Screen Mirroring from your iPhone.
4.2.2 AutoLink (for Android phones)
If your Android phone does not have AutoLink, you need to scan the QR code to download the "Autolink Pro" APP before you can use the Android phone's mirror link function.
- Open the "Autolink Pro" app from your phone.
- Search for the WiFi "CAR-XXXX" and connect it.
- Allow "Autolink Pro" to use mirror link function.
4.3 Key Features and Functions
- Support Original Car Settings: Retains OEM system functions including speed, parking brake, temperature, seat belt reminder, engine speed, reversing system, OEM CD/DVD player, OEM audio speaker, OEM factory steering wheel control, and compatible OEM iDrive rotation button.
- Wireless/Wired CarPlay & Android Auto: Connect via Bluetooth for seamless integration of your smartphone apps, including online maps, music streaming, phone calls, SMS, and web search.
- AirPlay & AutoLink: Wireless/Wired AirPlay for iOS phones and Wireless/Wired AutoLink for Android phones, allowing map navigation, video playback, and music streaming from your phone's apps.
- Hands-Free Phone Call: Make and receive calls, return missed calls, and listen to voicemail directly from the display.
- Mobile Music Play: Download and link various music apps (e.g., Music, Amazon Music, YouTube Music, Tidal, Spotify) to the homescreen menu for playback.
- Support Rear Camera Function: Compatible with original reverse camera, parking radar, and aftermarket AHD 720P rear cameras.
- Navigation & Maps: Supports mainstream map applications like Waze, Google Maps, Naver Map, and T Map for easy navigation.
- Siri & Google Voice Control: Use voice commands for navigation, music playback, news, and weather updates, keeping your hands on the steering wheel and eyes on the road.
- Automatic Day/Night Modes: The display automatically switches between day and night modes for optimal visibility.









5. Specifications
| Attribute | Value |
|---|---|
| Display Size | 12.3 inches |
| Resolution | 1920*720 |
| Operating System | Linux |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| TF/Micro SD Slot | 0 |
| Din | One Din |
| Voltage | 12 V |
| Item Weight | 2kg |
| Item Size | 21.2*8.2*2.7 cm |
| Output Type | Colored |
| Special Features | Mobile Phone, MP3 players |
| Digital Media Format | CD |
| OSD Language | Chinese (Simplified), Chinese (Traditional), German, Russian, French, Korean, Portuguese, Japanese, Spanish, Italian, English |
| Brand Name | Road Top |
| Origin | Mainland China |
| For Vehicle Brands/Model | Audi |
| Audi Model Compatibility | A4, A5 (2016-2019 MIB/MIB2) |
| Certification | CE |
| Material | Plastic and metal |
| Warranty | 1 Year |
6. Troubleshooting (FAQ)
Q: My OEM system screen cannot be displayed normally.
A: Please set the correct resolution in Setup > Car Settings > Original Car's Screen Resolution. Refer to Section 3.1 for detailed steps.
Q: My car has no sound.
A: Make sure you have properly configured either Bluetooth Audio or AMI/AUX. Only one mode can be active at a time. Using both may cause no sound. Refer to Section 3.2 for step-by-step guidance.
Q: My reverse camera isn't functioning.
A: If the reverse camera is not working, first identify:
- Whether it is an OEM or aftermarket camera.
- Whether your vehicle is automatic or manual transmission.
Then, go to Section 3.3 "Reverse Camera Setup" and follow the corresponding setup steps.
Q: My CarPlay / Android Auto connection keeps dropping.
A: Please try changing to a new WiFi channel in Setup > WiFi > Channel.
Q: During calls, the other party reports hearing an echo.
A: Please go to Setup > Audio > Call Echo Cancellation and select "Start Auto AEC" to perform echo cancellation. For optimal call quality, ensure the vehicle interior remains quiet.
Q: Which steering wheel controls are compatible with this product?
A: The steering wheel supports volume adjustment, track skip, phone call answering, and voice control keys. Compatible only with vehicles equipped with a multi-function steering wheel.
Q: Does the product work with the original car microphone?
A: Yes, the original car microphone is supported via original Bluetooth Audio mode.
7. User Tips
- Vehicle Specificity: This multimedia display is specifically designed for Audi A4 and A5 models from 2016-2019 with MIB/MIB2 systems. It is not a universal fit for all cars.
- Installation Complexity: While the manual provides detailed steps, the installation involves intricate cable connections and software configuration. If you lack experience, professional installation is highly recommended to avoid potential damage.
- Integrated Features: The screen comes with Apple CarPlay and Android Auto functionality built-in, supporting both wireless and wired connections.
- Touchscreen Interface: The display features a responsive touchscreen for intuitive control.
- RAM/ROM: Specific RAM and ROM details are not provided in the available documentation.
8. Warranty & Support
Warranty
This product comes with a 1-year warranty.
Contact Support
For support, contact us via your purchase platform, email, or WhatsApp. To expedite assistance, please include the following information:
- Order ID
- Vehicle model and year
- Detailed issue description. A video (preferably showing wiring) or photos are highly recommended for faster resolution.
