VoltCraft 2000N.M Brushless Electric Impact Wrench

Contents

VoltCraft 2000N.M Brushless Electric Impact Wrench

User Manual

1. Introduction

Thank you for choosing the VoltCraft 2000N.M Brushless Electric Impact Wrench. This powerful and versatile tool is designed for various applications, including car repair, construction, home installation, and flat hole drilling. Featuring a brushless motor for extended lifespan and efficiency, high torque, and multiple speed settings, this impact wrench provides reliable performance for both professional and DIY tasks. Please read this manual thoroughly before operation to ensure safe and effective use.

2. General Safety Instructions

Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.

  • Work Area Safety: Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Electrical Safety: Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions.
  • Personal Safety: Always wear eye protection, hearing protection, and appropriate clothing. Do not overreach. Maintain proper footing and balance at all times.
  • Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
  • Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs.

3. Package Contents

The following items are typically included in a complete package. Please verify your specific package contents upon receipt.

  • 1 x Electric Impact Wrench
  • 2 x Lithium Batteries (18V, 4.0Ah)
  • 1 x Battery Charger
  • 5 x Sockets (17mm, 18mm, 19mm, 21mm, 22mm)
  • 1 x Plastic Storage Box
  • 1 x User Manual
VoltCraft Impact Wrench with accessories
Figure 1: Main product image showing the impact wrench, two batteries, charger, sockets, and storage box.

4. Product Overview

Familiarize yourself with the components of your VoltCraft Impact Wrench:

Labeled diagram of impact wrench components
Figure 2: Labeled diagram of the impact wrench showing key parts.
  • 1/2" Square Drive: For attaching sockets.
  • Cooling Holes: For heat dissipation during operation.
  • LED Light: Illuminates the work area.
  • Forward & Reverse Switch: Controls the direction of rotation.
  • Trigger Switch: Activates the tool and controls speed (stepless).
  • Non-slip Handle: Ergonomic design for comfortable and secure grip.
  • Power Indicator: Displays remaining battery charge.
  • Battery: Rechargeable lithium-ion battery.
  • BL Motor: Brushless motor for enhanced efficiency and durability.
Control panel diagram
Figure 3: Control panel detailing Brake Stop, Gear (L, M, H), Battery Indicator, and Mode Switch.

5. Setup

Before first use, ensure the battery is fully charged.

5.1 Charging the Battery

Connect the charger to a power outlet and insert the battery. The charger indicator will show the charging status. Once fully charged, remove the battery from the charger.

5.2 Attaching/Detaching the Battery

  1. To attach: Align the battery with the base of the tool and slide it in until it clicks into place.
  2. To detach: Press the battery release button and slide the battery out.

5.3 Attaching Sockets

  1. Ensure the tool is off and the battery is removed.
  2. Align the desired socket with the 1/2" square drive on the tool.
  3. Push the socket firmly onto the drive until it locks securely.
  4. To remove, pull the socket off the drive.
Video 1: Demonstration of attaching a socket and battery to the impact wrench, and showcasing speed settings and reverse auto-stop function.

6. Operating Instructions

6.1 Powering On/Off and Speed Control

The tool is activated by pressing the trigger switch. The speed is stepless, meaning it increases with greater pressure on the trigger.

Stepless speed control via trigger
Figure 4: Illustration of stepless speed control by pressing the trigger switch.

6.2 Forward/Reverse Rotation

Use the Forward & Reverse switch located above the trigger to select the rotation direction. Push it left for forward rotation and right for reverse rotation. The center position locks the trigger for safety.

Forward/Reverse button mechanism
Figure 5: Diagram showing the Forward/Reverse button positions: Reverse, Static (locked), and Forward.

6.3 Gear Settings

The tool features 3 forward gear settings (Low, Medium, High) and 2 reverse gear settings. Use the Mode Switch (BL Switch) on the control panel to cycle through these settings. The selected gear will be indicated by the lights on the control panel.

6.4 Reverse Auto-Stop Function

In reverse mode, the tool includes an auto-stop function. This feature automatically stops rotation and impact within two seconds once the fastener is adequately loosened, preventing the nut from falling off completely.

Reverse Auto-Stop function diagram
Figure 6: Comparison of Reverse Auto-Stop function (automatically stops when turning to the edge of the bolt) versus no auto-stop (easy to turn around and cause the nut to fall off).

6.5 Battery Indicator

The power indicator on the tool's base displays the remaining battery charge, allowing you to monitor power levels during use.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your impact wrench.

  • Cleaning: Keep the tool's ventilation openings clean to prevent overheating. Use a soft, damp cloth to clean the exterior. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the tool and batteries in a cool, dry place, away from direct sunlight and moisture. Ensure the battery is removed from the tool before storage.
  • Battery Care: Do not store batteries in a discharged state. Recharge them periodically if not in use for extended periods.
  • Inspection: Periodically check for loose screws, damaged cords, or worn parts. Have any damaged parts repaired by a qualified service technician.

8. Troubleshooting

If you encounter issues with your impact wrench, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Tool does not startBattery not inserted correctly
Battery discharged
Forward/Reverse switch in locked position
Re-insert battery securely
Charge the battery
Move switch to forward or reverse position
Reduced power/torqueLow battery charge
Incorrect gear setting
Worn carbon brushes (for brushed motors, but this is brushless)
Tool overheating
Recharge battery
Select a higher gear setting
Allow tool to cool down
Socket not attaching securelyIncorrect socket size
Debris in square drive
Use correct 1/2" drive sockets
Clean the square drive

9. Specifications

Technical specifications for the VoltCraft Brushless Electric Impact Wrench:

Product specifications table
Figure 7: Detailed product specifications.
FeatureSpecification
Model NumberBrushless Electric Impact Wrench
TypeRechargeable Electric Wrench
MotorBrushless
Power SourceBattery (18V)
Rated Voltage18V
Battery Capacity (for included batteries)4.0Ah/piece
No-load Speed0-7900 RPM
Impact Frequency0-7300 IPM
Maximum Torque2000N.M
Square Drive1/2 inch (12.7mm)
Gear SettingsForward 3 gears, Reverse 2 gears (including reverse auto-stop function)
Standard Crew CompatibilityM10-M24 (3/8"-1")
High Strength Crew CompatibilityM10-M16 (3/8"-5/8")
CertificationCE
OriginMainland China
UseHome DIY
High-concerned chemicalNone

10. User Tips

  • Verify Package Contents: Before finalizing your purchase, carefully review the product description and selected package option to ensure all desired accessories (e.g., batteries, charger, sockets) are included, as package configurations may vary.
  • Battery Compatibility: This tool is compatible with Makita 18V B series lithium batteries (e.g., BL1830, BL1850, BL1840, BL1840B, BL1850B). It is NOT compatible with DC18WA, BL1813G, BL1413G, G Series batteries, or 18V Ni-CD batteries.
  • Applications: The impact wrench is suitable for a wide range of tasks including car repair, general construction, home installation, and even flat hole drilling with appropriate accessories.
Applications of the impact wrench
Figure 8: Visual examples of the impact wrench's applications.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.