1. Introduction
Thank you for choosing the UGREEN 40Gbps USB4 NVMe SSD Enclosure. This high-performance enclosure is designed to provide ultra-fast data transfer speeds and expand your storage capacity for various devices. This manual will guide you through the installation, operation, and maintenance of your new SSD enclosure.
The UGREEN D700 enclosure supports M.2 NVMe SSDs and is compatible with Thunderbolt 3, Thunderbolt 4, and USB4 ports, offering transfer speeds up to 40Gbps. Its robust aluminum alloy housing and advanced heat dissipation design ensure optimal performance and longevity for your SSD.

2. Package Contents
Please check the package contents carefully. If any items are missing or damaged, please contact your retailer.
- 1 x UGREEN 40Gbps USB4 M.2 NVMe SSD Enclosure
- 1 x USB-C to USB-C Cable (30cm)
- 1 x Silicone Thermal Pad (2W/m.k)
- 1 x Screwdriver
- 1 x User Manual
- 1 x Warranty Card
- 1 x Retail Package Box

3. Important Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
3.1 Data Backup
Before using the device, please back up all your important data to prevent any accidental data loss. Data loss resulting from improper operation or human factors is typically not covered by warranty. It is recommended to regularly create backup copies of your data.
3.2 General Precautions
- **Optimal Performance:** For optimal performance and to avoid potential transfer rate bottlenecks, it is recommended to connect this product directly to a USB4 or Thunderbolt™ 3/4/5 standard port. Avoid using hubs, docking stations, or extension cables for critical data transfers.
- **Performance Variation:** Actual performance may vary depending on hardware resource overhead, SSD model, operating system version, file system formats, USB cables, and other factors.
- **Windows Performance:** To boost the product's performance on a Windows computer, right-click the disk, select "Properties" > "Policies" from the pop-up menu, then check "Better performance" and "Enable write caching on the device" options.
- **Power Supply:** Do not connect the product to devices with an operating voltage exceeding 5V ± 5% to prevent damage to the product or safety risks.
- **Physical Damage:** Avoid dropping, squeezing, impacting, or throwing this product to prevent damage.
- **Environment:** To prevent internal circuit failure, use and store this product in a dry environment.
- **Small Parts:** This product contains small parts. Keep it out of reach of small children to avoid accidental ingestion.
- **Disassembly:** Do not disassemble or repair this product yourself. Improper disassembly or assembly may lead to electric shock or other safety risks. If repair or replacement parts/accessories are needed, please contact UGREEN customer service.
4. Setup & Installation
Follow these steps to install your M.2 NVMe SSD into the enclosure:
- **Open the Enclosure:** Loosen the screws on the enclosure and slide to open the cover.
- **Remove Pre-installed Screws:** Take out the pre-installed screws inside the enclosure.
- **Insert M.2 SSD:** Slowly insert your M.2 NVMe SSD into the M.2 slot. Ensure it is fully seated.
- **Secure SSD:** Re-install the screw to secure the SSD and tighten it.
- **Apply Thermal Pad:** Take out the thermal pad, peel off one side of its protective film, and stick it onto the SSD. Then, peel off the protective film from the other side. This helps with heat dissipation.
- **Close Enclosure:** Place the enclosure cover back and tighten the screws.
- **Connect to Device:** Connect the assembled enclosure to your terminal device (e.g., computer, phone, game console, camera) using the provided USB-C to USB-C cable.

5. Operating Instructions
Once the SSD is installed and the enclosure is connected to your device, it should be recognized as an external storage drive. You can then use it for data storage, backup, or transfer.
- **LED Indicator:** The enclosure features an LED indicator that shows the working status of the SSD.
- **Auto Sleep:** The device automatically enters sleep mode after 15 minutes of inactivity to extend the SSD's lifespan. Note that auto sleep is disabled when operating in USB4/Thunderbolt mode.
- **Safe Removal:** Always use the "Safely Remove Hardware" feature on your computer before disconnecting the enclosure, especially during data transfer, to prevent data corruption.

6. Maintenance
- Keep the enclosure clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Do not use harsh chemicals or abrasive cleaners on the product.
- Store the enclosure in a safe place when not in use to prevent physical damage.
7. Troubleshooting
7.1 Device Not Recognized
- Ensure the USB-C cable is securely connected to both the enclosure and your device.
- Try connecting to a different USB4 or Thunderbolt port on your computer.
- Verify that your SSD is correctly installed inside the enclosure and the screws are tightened.
- Check your computer's Disk Management (Windows) or Disk Utility (macOS) to see if the drive is detected but uninitialized or unformatted.
7.2 Slow Transfer Speeds
- Ensure you are connected to a genuine USB4 or Thunderbolt port on your host device. Older USB versions will result in lower speeds.
- Avoid using USB hubs or docking stations, as they can sometimes limit bandwidth. Connect directly if possible.
- Check the Windows performance settings as described in Section 3.2.
- Ensure your SSD is a high-performance NVMe drive capable of 40Gbps speeds.
7.3 Overheating
- Ensure the thermal pad is correctly installed between the SSD and the enclosure for efficient heat transfer.
- Avoid placing the enclosure in enclosed spaces that restrict airflow.
- Note that high-speed data transfers can generate heat; the aluminum casing is designed to dissipate this heat.
7.4 Compatibility Issues
Some devices with older firmware versions for built-in Thunderbolt™ and USB-PD protocols may require verification. Please check your device compatibility against the table below before purchase.

Note: Some devices may require manufacturer-assisted updates (OS, Thunderbolt™, and USB-PD firmware) for full USB4 compatibility. If a BIOS update is needed, professional guidance is strongly recommended to ensure system stability. Additionally, due to iPhone's power management, a USB-C hub/dock may be required for proper operation.
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | UGREEN |
| Model Number | D700 |
| Product Name | USB4 M.2 NVMe SSD Enclosure |
| Protocol | M.2 NVMe |
| External Interface | USB |
| Transfer Speed | Up to 40Gbps |
| Compatibility | Thunderbolt™ 5/4/3, USB4, USB 3.2/2.0/1.1 |
| Supported OS | Windows/macOS/Linux |
| Supported M.2 Slot | M-Key, B+M Key (NVMe PCIe only) |
| Supported SSD Size | 2230/2242/2260/2280 |
| Max Capacity | 8TB |
| Case Material | Aluminum Alloy |
| Chipset | Intelligent ASM2464PD Chip (supports UASP, S.M.A.R.T, TRIM) |
| Dimensions | 122mm x 66mm x 27mm |
| Power Source | 5.0V 3.0A Max |



9. User Tips
- **Heatsink Compatibility:** This enclosure does not support SSDs with pre-installed heatsinks. Ensure your M.2 NVMe SSD does not have a heatsink for proper fit and function.
- **Direct Connection for Speed:** For maximum 40Gbps transfer speeds, always connect the enclosure directly to a Thunderbolt 3/4/5 or USB4 port on your device. Using intermediate hubs or adapters may reduce performance.
- **Operating System Support:** The enclosure is compatible with Windows, macOS, and Linux operating systems.


10. Warranty & Support
UGREEN products come with a standard warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official UGREEN website.
A digital version of this user manual is available for download. You can find it at the following link: UGREEN D700 User Manual (PDF)