Sunster SH W8

Contents

Sunster SH W8 8KW Split Diesel Parking Heater

User Manual

Sunster SH W8 Diesel Parking Heater with remote, LCD, and app interface

Sunster SH W8 8KW Split Diesel Parking Heater with remote control, LCD display, and smartphone app interface.

1. Product Function

The Sunster SH W8 Diesel Parking Heater is designed to eliminate damage to your vehicle caused by sudden temperature drops. It improves the interior temperature, preheats engine coolant to prevent wear at low temperatures, and aids in thawing the car interior, starting the vehicle, and defrosting car glass.

2. Internal Structure

Internal structure diagram of the heater

Diagram showing the internal components: Control box, Ignition plug, Safety plug, Air outlet, Combustion chamber, Heating zone, Air inlet, Flame retardant impeller, and Air fan.

3. Heater Types

The SH W8 model is a split heater. Other types include:

  • Horizontal All-in-One Heater:
    Horizontal All-in-One Heater
  • Vertical All-in-One Heater:
    Vertical All-in-One Heater
  • Split Heater (SH W8 Type):
    Split Heater

4. Setup

4.1 Package Contents

Ensure all components are present before installation:

Complete kit contents of the diesel heater

The complete kit includes the main heater unit, air filter, LCD switch, oil filter, oil pump, air outlet grid, silencer, T connector, fuel pump rubber clip, intake/exhaust pipe, air outlet pipe, wire harness, fixed plate, 10L fuel tank, fixed cable, fuel hose, and various fixture accessories.

4.2 Installation Guidelines

This heater comes as a complete kit designed for easy installation. While specific steps are not detailed here, general safety practices should be followed:

  • Ensure the installation location is well-ventilated.
  • Mount the heater securely on a stable surface.
  • Connect fuel lines and electrical wiring according to standard safety procedures.
  • Ensure exhaust gases are safely directed outside the vehicle/enclosure.
  • Refer to the official PDF user manual for detailed installation diagrams and instructions.

5. Operating Instructions

5.1 Control Methods

The Sunster SH W8 offers multiple intelligent control methods:

4 Intelligent Control Methods

Control options include WiFi Connectivity (no distance limit), Remote Control (up to 260ft), Bluetooth Connectivity (up to 32ft), and LCD Panel Control.

Multiple Smart App Control Features

The smartphone app allows for Timing Function, Blow Mode, Temperature Setting, Gear Setting, and Automatic Start and Stop.

5.2 Switch Controller and Remote Control Types

ModelModel NumberSwitchRemote ControlMotherboard Type
Wireless remote controlS-A2013SLS-A2013SL SwitchS-A2013SL RemoteS-A2013SL Motherboard
S-A2018S-A2018 SwitchS-A2018 RemoteS-A2018 Motherboard

5.3 Wireless Remote Control Operation (S-A2013SL)

This section details the operation for the S-A2013SL control panel and remote.

Working Mode:

  • Gear Mode: Gear setting adjustable from 1 to 10.
  • Temperature Control Mode: Set temperature adjustable from 8°C to 36°C. The heater intelligently adjusts operation for efficiency.
  • Display: When powered off, the screen shows current time. When powered on, it shows running time.
  • Fault Codes: In case of a fault, a code will flash on the display for easier diagnosis.

Instructions:

  • Power On/Off: Press the [Power button] to turn on or off.
  • Mode Switch: Press the [Set button] to toggle between gear mode and temperature control mode.
  • Gear/Temperature Adjustment: Use [Up Adjustment button] to increase (+1) gear/temperature (max 10 gears/36°C) and [Down Adjustment button] to decrease (-1) (min 1 gear/8°C).
  • Basic Settings (Hold [Setting button] for 3s when powered on):
    1. Set current time (use [Set Key] to set, [Up/Down Adjust Key] to switch).
    2. Set automatic start time (same method).
    3. Set running time after auto start (0.5-hour increments).
    4. Turn automatic start function ON/OFF.
    Confirm changes with [Set Key], save all settings by holding [Set Key] for 3s.
  • Engineering Mode (Hold [Up] and [Down Adjust Key] for 3s when powered on): Displays data items like: 001: Heater mainboard version, 002: Fault code, 003: Shell temperature, 004: Power supply voltage, 005: Heater operating position, 006: Cab temperature, 007: Altitude, 008: Language switching.
  • Temperature Switching: Long press the adjustment key to switch between Fahrenheit and Celsius.
  • Remote Control Matching: Long press the upper adjustment key until

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.