1. Introduction
The Awgem KE1 40KHz Handheld Ultrasonic Cutter is a versatile tool designed for precise cutting and polishing of various materials. Utilizing 40KHz high-frequency ultrasonic vibration and 40W high power, it offers efficient and clean cuts for applications in DIY, model making, handicrafts, and industrial cutting. This manual provides essential information for safe and effective use of your device.
Video: Demonstrating the Awgem KE1 Ultrasonic Cutter's multi-material cutting capabilities and ease of blade replacement.
2. Safety & Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Avoid exposing the device to extreme temperatures or moisture. Doing so may damage the device and void the warranty. It is made of plastic and has sensitive electronic components inside.
- Do not leave the device in an outdoor car for a long time, as high temperatures may cause components to expand or explode.
- Batteries (if applicable) should be recycled or disposed of separately from household waste and according to local environmental laws and guidelines.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Product Features
- 40W High Power & 40KHz High-Frequency Cutting: Offers powerful and precise cutting capabilities.
- Cutting and Polishing Two-in-One: Versatile functionality for various crafting and DIY needs.
- Multi-Material Intelligent Cutting Solution: Effortlessly cuts plastics, resins, wood, carbon fiber, PCB boards, leather, gypsum, paper/cardboard, figurines/toys, silicone, and PVC.
- Intelligent Dynamic Automatic Frequency Tracking: Ensures stable and optimal cutting performance by continuously matching the best frequency.
- Self-Developed Patented Technology: Enhanced energy transmission and efficiency, with cutting efficiency jumping by 75%.
- 3-Speed Precision Adjustment: Selectable modes (Gentle, Balance, Strength) for different materials and tasks.
- Intelligent Temperature Control & Dynamic Power Protection: Double protection for cutting quality, preventing material carbonization and tool wear.
- Minimalist Pen Shape Design: Lightweight ABS shell (≤ 120g) for easy handling and portability.
- Universal Type-C Charging: Convenient charging with mobile phone cables, car chargers, and power banks.
- Blind Operation Finger Slot: Ergonomic design with a 3D finger groove and convex navigation key for comfortable use.
- Multi-Blade Compatibility: Supports various blade types for cutting, carving, and trimming, plus polishing strips for fine finishing.

Figure 1: Key features of the Awgem KE1 Ultrasonic Cutter.

Figure 2: Multi-material cutting capabilities of the KE1.
4. Specifications

Figure 3: Product parameters.
| Attribute | Value |
|---|---|
| Model Number | KE1 |
| Brand Name | Awgem |
| Product Name | Ultrasonic Cutting Knife |
| Ultrasonic Vibration Frequency | 40KHz |
| Maximum Output Power | 40W |
| Rated Voltage | DC12V/15V |
| Fast Charging Protocol | PD Type-C |
| Gear Adjustment | 3 levels of intensity |
| Shell Material | Plastic |
| Handle Material | Plastic |
| Blade Material | STEEL |
| Blade Length | 2cm |
| Blade Angle | ≤ 60 ° |
| Full Length | 19.15cm |
| Size (L*W*H) | 17.29*3.1*2.4mm |
| Built-in Battery | NO (Needs to be plugged in for use) |
| Safety Lock | YES |
| Operating Environment | 5-35°C, humidity 20 to 70% (non-condensation) |
| DIY Supplies | Electrical |
| Origin | Mainland China |
5. Package Contents
The Awgem KE1 Ultrasonic Cutter package typically includes the following items:
- KE1 Ultrasonic Cutting Knife
- Packaging box
- 30W Charger
- USB-C to USB-C Cable
- Protective cover
- Cut-resistant finger gloves (2 pieces)
- Blade fixing screws (4 pieces)
- Blade clamp
- Hex key (1 piece)
- Blades (40 pieces)
- Instruction Manual (1 piece)
- Storage box (1 piece)

Figure 4: Contents of Accessory A package.
6. Setup
6.1 Before First Use
- Remove all protective films from the device.
6.2 Power Connection
The Awgem KE1 does not have a built-in battery and requires a continuous power supply to operate.
- Connect the provided USB-C to USB-C cable to the 30W charger.
- Plug the charger into a power outlet.
- Connect the USB-C cable to the device. Ensure the power supply meets the minimum requirement of 15V/2A for optimal performance.
7. Operating Instructions
7.1 Power On/Off
- To turn on the device, press and hold the power button for 3 seconds.
- To turn off the device, press and hold the power button for 3 seconds again.
7.2 Mode Selection (Gear Adjustment)
The device features 3 levels of intensity, indicated by LED lights. Short press the power button to cycle through the modes:
- 1st Level (Gentle): Fine cutting without damaging the material. (One LED light)
- 2nd Level (Balance): Both fast and stable cutting. (Two LED lights)
- 3rd Level (Strength): Hardcore assault for tougher materials. (Three LED lights)

Figure 5: Operation visualization with 3 gear settings.
7.3 Cutting Technique
- Always cut materials from top to bottom.
- Do not apply excessive force; allow the ultrasonic vibration to do the cutting.
- For optimal results, select the appropriate gear level for the material thickness and type.
7.4 After Use
- Turn off the device.
- Store it in a dry place, away from children.
8. Maintenance
8.1 Replacing Blades
Always ensure the device is powered off and has completely cooled down before attempting to replace the blade to avoid scratches and cuts. Wear the provided cut-resistant finger gloves for safety.

Figure 6: Operating instructions for replacing blades.
- Before replacing the blade, please ensure that the power has been cut off and the body has completely cooled down.
- Use the provided hex wrench to loosen the fastening screw counterclockwise and remove the old blade.
- Pay attention to the correct direction of the blade edge. Insert the new blade into the slot of the blade fixing clamp, making sure it is inserted into the bottom. The blade edge should be facing outward. Use the hex wrench to tighten the fastening screw clockwise.
8.2 Blade Types
The Awgem KE1 is compatible with various blade types for different applications, including standard, sharp double-edged, 60° sharp-edged, curved, narrow-edged deep chisel, side, wide blade deep chisel, and polishing strips.

Figure 7: Various blade types.
9. Troubleshooting
9.1 Power and Voltage Issues
- Device not turning on or first indicator light flashing: This indicates a voltage mismatch error. Ensure your power supply meets the minimum requirement of 15V/2A. The device does not have a built-in battery and must be connected to a power source to operate.
- Abnormal input voltage prompt: A single light flashing for the first gear indicates an issue with the input voltage. Verify your power adapter and cable.
9.2 Overheating
- Device overheats or three gear lights flash simultaneously: This is an overpower warning or overheat protection activation. Stop operation immediately and allow the device to cool down naturally. Do not place the cutter head on flammable materials when overheated.
- Abnormal temperature prompt: A single light flashing for the third gear indicates an abnormal temperature. Follow the same cooling procedure.
9.3 Cutting Performance
- Melted edges when cutting plastics: This can occur if the power setting is too high or the cutting speed is too slow. Adjust the power and cutting speed for cleaner results.
- Blade burning or poor cut quality on PCBs/wood: Similar to plastics, adjust power and speed. Ensure the blade is sharp and clean.
- Material thickness limitations: The device can only cut materials with a thickness of less than 8mm. Refer to the specifications for recommended maximum thicknesses for various materials.
- Materials not recommended for cutting:
- Metal/Glass: May wear out the cutter head.
- Cloth/Fiber: Easily stretched and unsuitable for vibration cutting.
- Soft Silicone or Foam: Absorb vibration and may cause uneven cutting. - Using third-party cutter heads: While possible, the sharpness and durability of third-party cutter heads cannot be guaranteed and may affect the cutting experience. Original high-carbon steel blades are recommended for optimal performance.
10. User Tips
- Gentle Touch: Do not apply too much force; let the ultrasonic vibration do the work for cleaner, more precise cuts.
- Blade Cap Caution: Be careful when removing the blade cap, as it can come off suddenly. Always ensure a firm grip to prevent accidental cuts.
- 3D Print Perfection: This tool is excellent for cleaning and making precise cuts on 3D printed models, offering better results than regular edged tools.
- Normal Heat: The tool will heat up during active use. This is normal, and the device includes built-in protection mechanisms to prevent damage.
- Power Source is Key: Always ensure you use a power source that meets the specified voltage (15V/2A) for optimal performance and to avoid voltage mismatch errors.
11. Warranty & Support
11.1 Manufacturer Information
- Company Name: Shenzhen JueQi Technology Co., LTD
- Full Address: CN-Building A 907, Zhiyun Industrial Park, No.13, Huaxing Road, Henglang Community, Dalang Street, Longhua District, Shenzhen City
- Email: xiaomin.huang@jueqikj.com
- Telephone: 86-18818780728
11.2 EU Authorized Representative
- Company Name: MAGHREB TEX
- Full Address: FR-8 Rue Antonin Georges Belin, ARGENTEUIL, VAL D OISE
- Email: yuanfen429631@gmail.com
- Telephone: 33-615875362
12. Compliance Information
The Awgem KE1 Ultrasonic Cutter complies with the following standards:
- EN 55032:2015+A11:2020, EN 55035:2017+A11:2020
- EN IEC 61000-3-2:2019/A1:2021, EN IEC 61000-3-3:2013+A1:2019
- EN 61000-4-2:2019, ENC IEC 61000-4-3:2020
- EN 61000-4-2:2012, ENC 61000-4-5:2014+A1:2017
- EN 61000-4-2:2014, ENC 61000-4-8:2010
- ENC IEC 61000-4-11:2020

Figure 8: Awgem KE1 Industrial Standard features.