1. Introduction
The SpeedyBee Bee25 is a 2.5-inch frame kit designed for RC FPV racing drones. It features a modular design, making it a cost-effective and versatile choice for drone enthusiasts. This manual provides essential information for setting up, operating, and maintaining your Bee25 frame kit.

Figure 1: SpeedyBee Bee25 Frame - Modular Design
Video 1: SpeedyBee Bee25 Frame Kit Product Showcase
2. Package Contents
Please check the contents of your package against the lists below. Components may vary slightly between the Standard and Pro versions.
2.1 Bee25 Standard Version

Figure 2: Bee25 Standard Version Packing List
- Carbon Plate x1
- Protective Ring x1
- EXT LITE Kit x1
- Antenna Mounting R x1
- Antenna Mounting L x1
- Injection Molding Head x1
- Camera Dampening Silicone x1
- Receiver Cover x1
- GPS Cover x1
- M2 Anti-Slip Nuts x5
- Button Head Screws M2*7mm x10
- Button Head Screws M2*6mm x20
- Button Head Screws M2*4mm x18
- Button Head Screws M2*8mm x6
- Flat Head Hex Socket screws M2*12mm x4
- Flat Head Screws M1.6*4mm x4
- Hex Socket Cap Screws M1.6*8mm x6
- Type-C Connector 4Pin*40mm x1
- Male SH1.25-4P *25mm x1
- Female SH1.25-4P *25mm x1
- Micro USB Connector 4Pin*40mm x1
- Double-Ended SH1.0-6P*60mm x1
- Battery Nylon Strap 150mm x1
- Battery Elastic Strap 35mm x1
- CNC for Securing Strap x1
- Motor Wire Sleeves x4
- O3 Copper Tube Antenna x1
- Service Card x1
- Screwdriver Set x1
- Battery Anti-Slip Pad x1
- Black Power Cable 35mm x1
- Red Power Cable 35mm x1
2.2 Bee25 Pro Version

Figure 3: Bee25 Pro Version Packing List
- Carbon Plate x1
- Protective Ring x1
- EXT PRO Kit x1
- Antenna Mounting R x1
- Antenna Mounting L x1
- Injection Molding Head x1
- Camera Dampening Silicone x1
- Receiver Cover x1
- GPS Cover x1
- M2 Anti-Slip Nuts x5
- Button Head Screws M2*7mm x10
- Button Head Screws M2*6mm x20
- Button Head Screws M2*4mm x18
- Button Head Screws M2*8mm x6
- Flat Head Hex Socket screws M2*12mm x4
- Hex Socket Cap Screws M1.6*8mm x6
- Type-C Connector 4Pin*40mm x1
- Male SH1.25-4P *25mm x1
- Female SH1.25-4P *25mm x1
- Micro USB Connector 4Pin*40mm x1
- Double-Ended SH1.0-6P*60mm x1
- Battery Nylon Strap 150mm x1
- Battery Elastic Strap 35mm x1
- CNC for Securing Strap x1
- Motor Wire Sleeves x4
- O3 Copper Tube Antenna x1
- Service Card x1
- Screwdriver Set x1
- Battery Anti-Slip Pad x1
- Black Power Cable 35mm x1
- Red Power Cable 35mm x1
- Bee25 Meteor LED x1
3. Setup and Assembly
The SpeedyBee Bee25 frame features a modular design for straightforward assembly. Follow these general steps:
- Frame Assembly: Begin by assembling the main carbon plate with the protective rings.
- Head Installation: Attach the injection molded head (standard) or the optional aluminum alloy head. Ensure the shock-absorbing silicone is correctly placed for camera protection.
- EXT Module Integration: Install the EXT LITE (Standard) or EXT PRO (Pro) module. This module is crucial for wireless Bluetooth tuning and other functionalities.
- Component Mounting: Mount your flight controller, VTX (Video Transmitter), receiver, and other electronic components onto the frame. The frame supports 25.5*25.5mm stack mounting holes.
- Antenna Installation: Secure the air intake antenna base and your chosen antennas.
- Wiring: Connect all components according to your flight controller's diagram. The frame is designed to accommodate clean wiring.

Figure 4: Wireless Bluetooth Tuning Frame Overview

Figure 5: Frame Structure and Compatible Devices
Compatible Devices: The Bee25 frame is suitable for O3 Air Unit, RunCamLink, TX800, and other modules. Note that except for O3, other modules may require additional 3D printed parts for mounting.
4. Operating Instructions
4.1 Wireless Bluetooth Tuning
The Bee25 Pro version, equipped with the EXT PRO module, allows for wireless Bluetooth tuning of your flight controller. Connect your drone to the SpeedyBee app on your smartphone for convenient parameter adjustments.
4.2 Meteor LED 2.0 (Pro Version Only)
The Bee25 Pro version includes the Meteor LED 2.0 strip, which provides visual feedback on your drone's status. Users can customize these indicator settings via the SpeedyBee app according to personal preferences. The status detection function requires communication with the flight controller via TX and RX.
- Green LED: Arm Mode Enabled
- Red LED: Low Voltage Alarm
- White LED: Return to Home Status

Figure 6: Meteor LED 2.0 Status Indicators
5. Maintenance
- Regular Inspection: Periodically check all screws and fasteners for tightness, especially after crashes or hard landings.
- Cleaning: Keep the frame clean from dirt, dust, and debris. Use a soft brush or compressed air.
- Component Check: Inspect carbon fiber parts for cracks or damage. Replace any damaged components immediately to ensure flight safety.
- Wiring: Ensure all wires are securely connected and not frayed or pinched.
6. Troubleshooting
- Unstable Flight: Check if all frame components are securely fastened. Ensure propellers are correctly installed and undamaged.
- LEDs Not Working (Pro Version): Verify that the Meteor LED strip is correctly connected to the EXT PRO module and that TX/RX communication with the flight controller is established. Check settings in the SpeedyBee app.
- Bluetooth Connection Issues: Ensure the EXT module is powered on and within range. Restart the SpeedyBee app and your drone.
7. Specifications

Figure 7: SpeedyBee Bee25 Frame Specifications
| Feature | Specification |
|---|---|
| Product Name | SpeedyBee Bee25 Frame |
| Wheelbase | 120mm |
| Carbon Plate Thickness | 2mm |
| Camera Mounting Distance | 19/20mm |
| Mounting Height of Electronic Equipment | 18mm |
| Stack Mounting Holes | 25.5*25.5mm |
| Compatible VTX | O3 AirUnit / Link / TX800 / TXULTRA (Except for O3, other modules require additional 3D printed parts) |
| Propeller Size | 2.5 inch |
| Motor Mounting Holes | 9*9mm |
| Weight | 68±2g |
| Recommended Motor | 1404/1504/1505 |
| Recommended KV | 4S 4300-4800KV, 6S 2350-2900KV |
| Recommended Battery | 4S 650-1100mAh, 6S 650-850mAh |
| Material | Carbon Fiber |
| Is Electric | No battery |
| Is Batteries Included | No |
8. User Tips
- Check Contents: Upon receiving your kit, carefully check all included parts against the packing list to ensure everything is present.
- Follow Instructions: Adhere to the assembly instructions and diagrams for optimal performance and durability.
- Secure Connections: Always double-check all screw connections and wiring before flight.
- App Customization: For Pro version users, explore the SpeedyBee app to customize LED behaviors and fine-tune flight parameters.
9. Warranty and Support
For any issues, questions, or support needs regarding your SpeedyBee Bee25 Frame Kit, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.