MiBoxer TRI-PZ/TRI-C1ZR/ZB-Box3

Contents

MiBoxer Smart Lighting Control System User Manual

Models: TRI-PZ, TRI-C1ZR AC Triac Dimmers & ZB-Box3 Multimode Gateway

Brand: MiBoxer

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MiBoxer Smart Lighting Control System, including the TRI-PZ and TRI-C1ZR AC Triac Dimmers and the ZB-Box3 Multimode Gateway. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Overview of MiBoxer TRI-C1ZR, TRI-PZ, and ZB-Box3 products
Figure 1: MiBoxer Smart Lighting Control System Components

2. Features

2.1. AC Triac Dimmers (TRI-PZ / TRI-C1ZR)

  • Supports control of traditional incandescent lamps, halogen lamps, and triac dimmable LED lamps.
  • Zigbee 3.0 standard protocol for smart home integration.
  • 2.4G RF wireless remote control with a control distance of up to 30m.
  • Push dimming function for manual control.
  • Trailing edge (ELV) phase-cut technology.
  • 0-100% stepless dimming and flicker-free operation.
  • Adjustable lowest brightness setting function.
  • Built-in temperature detection switch for over-heat/over-load protection.
  • Auto transmitting function for extended control distance.
  • Reliable screw connector for easy installation.
  • Anti-fire PC shell for enhanced safety.
  • Compatible with Alexa and Google Home voice control (via Zigbee gateway).

2.2. Multimode Gateway (ZB-Box3)

  • Upgraded version of ZB-Box1.
  • Compatible with Zigbee 3.0 and Bluetooth series products.
  • Supports APP control and third-party voice control.
  • Supports online firmware upgrades.
  • Can connect up to 128 sub-devices (Zigbee and Bluetooth Mesh).

3. Specifications

3.1. AC Triac Dimmers (TRI-PZ / TRI-C1ZR)

ParameterTRI-PZTRI-C1ZR
Model No.TRI-PZTRI-C1ZR
Input Voltage100-240V~ 50/60Hz
Output Voltage100-240V~
Max. Output Current2.27A1.36A
Max. Output Power250W @110V; 500W @220V150W @110V; 300W @220V
Dim MethodZigbee 3.0 + 2.4G + Push
Working Temperature-10~40°C
Zigbee Control Distance100m (open area)
2.4G RF Control Distance30m
MaterialABS
CertificationCE, ROHS
TRI-PZ and TRI-C1ZR Dimmers Product Parameters and Dimensions
Figure 2: TRI-PZ and TRI-C1ZR Dimmers Product Parameters and Dimensions

3.2. Multimode Gateway (ZB-Box3)

ParameterValue
Model No.ZB-Box3
Input5V⎓1A (Type-C)
Working Temperature-10~40°C
Wireless TechnologyWi-Fi IEEE 802.11b/g/n 2.4GHz, Zigbee 802.15.4, Bluetooth 5.0
Max Connected Devices128pcs (Bluetooth Mesh + BLE + Zigbee sub-devices)
Communication DistanceIndoor 30m, Outdoor 100m
ZB-Box3 Multimode Gateway Product Parameters and Dimensions
Figure 3: ZB-Box3 Multimode Gateway Product Parameters and Dimensions

4. Safety Information and Attention

  • Always turn off the power supply before installation or maintenance.
  • Ensure the input voltage matches the device requirements (100-240V~).
  • Do not disassemble the device if you are not an expert; improper disassembly may cause damage.
  • Avoid installing the dimmer in areas with wide-range metal objects or strong electromagnetic waves, as this may seriously affect the remote control distance.
  • The dimmer cannot be used in humid areas.
  • Ensure all cable connections are correct before turning on the power to prevent damage to the dimmer.

5. Installation

5.1. AC Triac Dimmers (TRI-PZ / TRI-C1ZR) Wiring

The dimmers support two wiring methods. Ensure the power supply is OFF before proceeding.

TRI-PZ and TRI-C1ZR Dimmers Connection Diagram
Figure 4: TRI-PZ and TRI-C1ZR Dimmers Connection Diagram (Method 1 & 2)

Installation into Bottom Box

The dimmer supports standard bottom boxes with a depth above 50mm.

TRI-PZ and TRI-C1ZR Dimmers Installation Diagram
Figure 5: TRI-PZ and TRI-C1ZR Dimmers Installation Diagram

5.2. ZB-Box3 Multimode Gateway Setup

Connect the ZB-Box3 gateway to a 5V⎓1A (Type-C) power source. Ensure it is placed in a central location for optimal wireless coverage.

6. Operating Instructions

6.1. PUSH Dimming (for TRI-PZ / TRI-C1ZR)

  • Short press PUSH switch: Turns the light ON/OFF.
  • Long press PUSH switch:
    • Stepless dimming brightness.
    • Long press and release your finger, then repeat long pressing to increase or decrease brightness.
    • If you long press the switch for 20 seconds until all lights have the same brightness, the dimmer will connect with the same self-return switch. The quantity of dimmers that can connect with one self-return switch cannot exceed 25 pieces, and the connection cable of the self-return switch cannot be over 20m.
PUSH Dimming Instructions
Figure 6: PUSH Dimming Functionality

Breaker Mode (ON/OFF)

Attention: Breaker mode only supports turning ON/OFF the light; dimming is not possible when this mode is activated.

  • Turn On: Short press "LINK" 5 times quickly. The indicator will blink 3 times quickly, and the mode will be activated.
  • Turn Off: Short press "LINK" 5 times quickly. The indicator will flash 3 times slowly, and the mode will be shut down.

Alternatively, you can review page 13 of the original manual for APP ON/OFF control of Breaker Mode.

Breaker Mode ON/OFF via App
Figure 7: Breaker Mode ON/OFF via App

6.2. Remote Control Instruction (for TRI-PZ / TRI-C1ZR)

For K1 remote:

  1. Learning code: Short press "LINK" one time.
  2. Alternatively: Power off the dimmer for 10 seconds and power on again.
  3. Alternatively: Short press the Push switch (ON-OFF).
  4. Press "SET" 3 times within 3 seconds. Linking is done once the light flashes 3 times slowly.

For other remotes:

  1. Learning code.
  2. Press the "ON" button in group zones 3 times within 3 seconds. Linking is done once the light flashes 3 times slowly.
Remote Control Linking Instructions
Figure 8: Remote Control Linking Instructions

For K1 remote:

  1. Learning code.
  2. Press "SET" 5 times within 3 seconds. Unlinking is done once the light flashes 10 times quickly.

For other remotes:

  1. Learning code.
  2. Press the "ON" button in group zones 5 times within 3 seconds. Unlinking is done once the light flashes 10 times quickly.
Remote Control Unlinking Instructions
Figure 9: Remote Control Unlinking Instructions

Compatible Remotes (Purchase Separately)

Compatible MiBoxer Remote Controls
Figure 10: Examples of Compatible MiBoxer Remote Controls

Auto Transmitting Function

One light can transmit signals from the remote control to another light within 30m. The remote control distance can be limitless as long as there is a light within 30m. All dimmers must be linked with the same remote.

Auto Transmitting Function Diagram
Figure 11: Auto Transmitting Function Diagram

6.3. Set Minimum Brightness (for TRI-PZ / TRI-C1ZR)

Using the "SET" Button

Short press "SET" to cycle through 10 kinds of brightness: 3%, 5%, 7%, 9%, 12%, 17%, 22%, 28%, 34%, 40%.

Using a Remote Control

Attention: This function should be paired with a remote first before setting.

For K1 remote:

  1. Long press "SET" for 3 seconds until the light flashes one time; the indicator will enter flashing status.
  2. Short press "SET" to get 10 kinds of brightness: 3%, 5%, 7%, 9%, 12%, 17%, 22%, 28%, 34%, 40%.
  3. Short press the rotating button to confirm the setting or wait for 10 seconds to be confirmed automatically; the light will recover to the previous brightness level.

For other remotes:

  1. Long press the "OFF" button on the remote or "O" button on the zone until the light flashes one time; the indicator will enter flashing status.
  2. Short press the "OFF" button on the remote or "O" button on the zone to set up 10 different brightness levels (3%, 5%, 7%, 9%, 12%, 17%, 22%, 28%, 34%, 40%).

Short press any button except "OFF" to confirm the setting or wait for 10 seconds to be confirmed automatically; the light will recover to the previous brightness level.

Attention: The Master OFF button can set the lowest brightness for all connected dimmers.

Set Minimum Brightness Instructions
Figure 12: Set Minimum Brightness Instructions

Set Lowest Brightness via App

If the light is off once dim brightness is set to 1%, you may need to increase the lowest brightness setting.

  1. Click "Settings" in the APP.
  2. Move the slider to finish the setting.
Set Lowest Brightness via App
Figure 13: Set Lowest Brightness via App

6.4. Smartphone APP Control (Tuya Smart)

To use smartphone APP control, you need to add the Zigbee 3.0 gateway (ZB-Box3) into the "TUYA Smart" App. Please review the instructions for the Zigbee 3.0 gateway first.

Pairing Network

  1. Connect with power supply.
  2. Pairing network (factory default is pairing network):
    • Way 1: Long press "LINK" for about 3 seconds until the indicator flashes quickly.
    • Way 2: Long press the push switch for 10 seconds while the light is in OFF status (requires wiring with a Push switch).
  3. Open the "TUYA Smart" APP, click on the Zigbee gateway, then click "Add sub device".
  4. Click "Indicator is flashing quickly".
  5. Support APP dimming or group control once successfully added.
Tuya Smart App Pairing Network
Figure 14: Tuya Smart App Pairing Network
Tuya Smart App Adding Sub-device
Figure 15: Tuya Smart App Adding Sub-device

6.5. Philips Hue Control Instruction

To add "Philips Hue" into the APP:

  1. Connect with power supply.
  2. Pairing network (factory default is pairing network):
    • Way 1: Long press "LINK" for about 3 seconds until the indicator flashes quickly.
    • Way 2: Long press the push switch for 10 seconds while the light is in OFF status (requires wiring with a Push switch).
  3. Open the "Philips Hue" App, click "SETTINGS" and then "Lights".
  4. Click "+" on the top right corner.
  5. Click "Search".
  6. Click "Start configuration" and follow the app instructions to complete the configuration.
Philips Hue Control Instruction
Figure 16: Philips Hue Control Instruction

6.6. Alexa Voice Control Instruction

Alexa Control (Audio support Zigbee 3.0 protocol)

You can connect directly if your Amazon ECHO already has built-in Zigbee 3.0 protocol. Compatible models include Amazon ECHO Plus (2nd Gen), ECHO (4th Gen), ECHO Studio, ECHO Show (2nd Gen).

Pairing Network
  1. Connect with power supply.
  2. Pairing network (factory default is pairing network):
    • Way 1: Long press "LINK" for about 3 seconds until the indicator flashes quickly.
    • Way 2: Long press the push switch for 10 seconds while the light is in OFF status (requires wiring with a Push switch).

Say to Amazon ECHO: "Alexa, Discover devices". Wait for a while to discover the device, and voice control will be activated.

Alexa Voice Control (Direct Zigbee 3.0)
Figure 17: Alexa Voice Control (Direct Zigbee 3.0)

Alexa Control (Audio doesn't support Zigbee 3.0 protocol)

If your Alexa device does not support Zigbee 3.0 protocol, please add the device into the MiBoxer Zigbee 3.0 gateway (ZB-Box3) first (check details in section 6.4), then follow these steps:

  1. Open the Alexa App.
  2. Click "More" on the bottom right corner.
  3. Click "Skills & Games".
  4. Click "Q" on the top right corner.
  5. Type in "Smart life" and search.
  6. Click the "Smart life" skill, follow the instructions to finish configuration and start voice control.
Alexa Voice Control via Gateway
Figure 18: Alexa Voice Control via Gateway

6.7. Google Home Voice Control Instruction

Please add the device into the MiBoxer Zigbee 3.0 gateway (ZB-Box3) first (check details in section 6.4), then follow these steps:

  1. Open the Google Home App.
  2. Click "+" on the top left corner.
  3. Click "Set up device".
  4. Click "Works with Google".
  5. Click "Q" on the top right corner.
  6. Type in "Smart life" and search.
  7. Click the "Smart life" skill, follow the instructions to finish configuration and start voice control.
Google Home Voice Control Instruction
Figure 19: Google Home Voice Control Instruction

7. Maintenance

  • Regularly check wiring connections for any signs of wear or damage.
  • Keep the devices clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the devices to extreme temperatures or humidity.
  • Ensure proper ventilation around the devices to prevent overheating.

8. Troubleshooting

  • Device not responding: Check power connections. Ensure the device is properly paired with the remote or gateway. Try re-pairing if necessary.
  • Dimming issues: Verify that the connected lamps are dimmable. Check the minimum brightness setting (refer to section 6.3). Ensure Breaker Mode is not activated (refer to section 6.1).
  • Remote control not working: Check the remote's battery. Ensure the remote is linked to the dimmer (refer to section 6.2).
  • APP/Voice control issues: Ensure the ZB-Box3 gateway is powered on and connected to your Wi-Fi network. Verify that the dimmers are added to the gateway and the smart home app (Tuya Smart, Philips Hue, Alexa, Google Home) is correctly configured with the relevant skills/devices. Check your internet connection.
  • Overheat protection: If the device stops working due to overheating, allow it to cool down. Check for proper ventilation and ensure the load does not exceed the maximum specified power.

9. User Tips

  • For optimal performance, place the ZB-Box3 gateway centrally within your home to maximize Zigbee and Bluetooth mesh coverage.
  • When setting up minimum brightness, start with a higher percentage and gradually decrease to find the lowest stable dimming level for your specific bulbs to avoid flickering.
  • If experiencing connectivity issues, try restarting both the gateway and the dimmers.
  • Regularly check for firmware updates for the ZB-Box3 gateway through the Tuya Smart app to ensure you have the latest features and security enhancements.

10. Warranty and Support

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact your retailer. For technical support, troubleshooting assistance, or further inquiries, please contact MiBoxer customer service or visit their official website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.