ALTHY H2-007 Performance Hydrogen Water Generator Bottle

1. Product Description

The ALTHY H2-007 Performance Hydrogen Water Generator Bottle is designed to produce hydrogen-rich water for health and wellness. Its core component is a DuPont N117 ion membrane, utilizing SPE/PEM dual-chamber electrolysis technology to separate hydrogen and oxygen. This process ensures the production of 99.99% pure hydrogen, while harmful substances like oxygen (O2), ozone (O3), and chlorine (CL2) are separated and discharged through a bottom exhaust vent.

The bottle features a BPA-free, food-grade PC cup body (Korean LG imported) and a Type-C USB charging interface for convenient and fast charging. It also includes a simple hydrogen absorption device for inhalation purposes.

The device is certified by a professional American testing agency authorized by IHSA (International Hydrogen Standard Association).

2. Safety Information and Precautions

• When the product leaves the factory, a small amount of pure water is added to the electrolyzer to keep the ion membrane moist and active. If the hydrogen-rich water cup is not used for more than 30 days, add clean drinking water to the cup to protect the ion membrane from drying out.
• Do not exceed 2 consecutive electrolysis cycles. After each cycle, open the lid to release pressure before starting the next electrolysis.
• Fill the water cup only up to 85%-90% of its capacity for electrolysis. Do not overfill.
• Use a 5V1A or 5V2A charger. The hydrogen water cup does not support fast charging plugs.
• Do not rinse the hydrogen-rich water cup directly under the faucet. The base is not waterproof, and direct flushing can cause water damage. Wipe the base with a damp cloth only.
• Do not use the device for electrolysis of other liquids such as beverages, coffee, or tea. Do not operate the device without water.
• For first-time use, remove the small dust cover from the electrolyzer.
• Always read this instruction manual and the "FAQ about Hydrogen Water Cups" document carefully before use.

3. Components Overview

The ALTHY H2-007 consists of several key parts:

• Lid: Top cover, includes a built-in automatic pressure relief valve.
• Cup Body: Made of BPA-free, food-grade PC material.
• Electrolyzer Base: Contains the DuPont N117 ion membrane, SPE/PEM electrodes, control panel with PPB/Time/Battery display, power button, and Type-C USB charging interface.
• Draining Vent: Located at the bottom for discharging separated harmful substances.

4. Setup

1. Unpack: Carefully remove all components from the packaging.
2. Initial Cleaning: Before first use, rinse the cup body with water. Do not rinse the base directly under the faucet; wipe it with a damp cloth.
3. Dust Cover: Remove the small dust cover from the electrolyzer.
4. Initial Charge: Ensure the device is fully charged using a 5V1A or 5V2A USB charger and the provided Type-C cable. Do not use fast chargers.
5. Ion Membrane Preparation: If the device has been stored for a long time (more than 30 days), add clean drinking water to the cup and let it sit for a few minutes to ensure the ion membrane is moist.

5. Operation

5.1 Hydrogen-Rich Water Mode

1. Fill Water: Add clean drinking water to the cup, filling it to about 85%-90% of its capacity. Do not overfill.
2. Secure Lid: Cover the cup with the lid securely.
3. Select Mode: Turn on the device. Different models may have 3-minute, 5-minute, or 10-minute hydrogen production times. Select your desired mode.
4. Enjoy: Once the hydrogen production is complete, you can drink the hydrogen-rich water directly.

5.2 Hydrogen Inhalation Mode

This mode is for experience only.

1. Fill Water: Add an appropriate amount of drinking water to the cup.
2. Connect Nasal Tube: Connect the nasal suction tube to the cap (some models may require an inhalation adapter).
3. Select Mode: Turn on the device and select a 3-minute, 5-minute, or 10-minute mode (depending on your model's available times).
4. Inhale: Inhale the generated hydrogen through the nasal tube.

6. Maintenance

6.1 Daily Cleaning

• Unscrew the cup body from the base.
• Rinse the cup body directly with water.
• The base cannot be washed directly with water. Only wipe the base with a damp cloth.

6.2 Deep Cleaning (Descaling)

Perform deep cleaning every 1-3 months, or when you notice a decrease in electrolysis bubbles or scale on the electrolytic cell.

1. Prepare Solution: Mix food-grade citric acid descaler and water at a ratio of 1:20. If citric acid is unavailable, use white vinegar.
2. Soak: Pour the solution into the electrolyzer and soak for approximately 30 minutes (for citric acid) or 60 minutes (for white vinegar).
3. Rinse: Pour out the mixed solution. Add clean water to the electrolyzer, pour it out again, and repeat this rinsing process 2-3 times.
4. Verification: If the scale on the electrolytic cell is significantly reduced and electrolysis bubbles increase, it indicates that the ion membrane has returned to normal. If the effect is not obvious but bubbles increase, repeat the above steps.
5. Important: Do not turn on the equipment while the electrolyzer is soaking.

7. Troubleshooting (Q&A)

Q: Why is there water at the bottom of the bottle? Has it been used before?

A: A small amount of purified water is added to the bottle base during production and sealing to maintain the activity of the electrolytic membrane. This is normal and ensures the membrane remains functional. If the bottle is left unused for a long time, please also add proper purified water to the base to keep the membrane functional.

Q: Why does my hydrogen water bottle fail to charge?

A: Do not use fast chargers (5V3A, 9V3A, or power over 15W). Excessive current will trigger the built-in circuit protection and stop charging. Please use a standard 5V1A/5V2A charger and the original charging cable. Additionally, do not operate the bottle while charging to prevent battery damage.

Q: Why does the hydrogen concentration tested by a hydrogen meter fall short of the stated standard?

A: Ordinary electronic hydrogen testers calculate data via unit conversion, which can lead to significant measurement errors and inaccurate readings. Reagent titration and gas chromatography are far more reliable methods to test actual hydrogen content. The PPB display on the device is based on laboratory data and is for reference only, as actual concentration can be affected by temperature, pressure, and water quality.

Q: Can I wash the hydrogen water bottle directly with running water?

A: Please do not rinse the base directly under tap water. Water may seep into the device through the charging port and button gaps, potentially causing circuit faults. Only the cup body can be rinsed directly; the base should only be wiped with a damp cloth.

8. Specifications

9. User Tips

• Consistent Use: The benefits of hydrogen water are often gradual. Consistent daily use is recommended for noticeable effects.
• Portability: The bottle's design makes it easy to carry, ensuring access to healthy water throughout the day.
• Water Taste: Many users report that the water tastes better and softer after hydrogen generation.
• Battery Life: The device generally offers a long battery life, and its operation is quiet.
• Optimal Water: For the best results and highest ORP reduction, use RO (Reverse Osmosis) water. Mineralized water also works but may show a weaker effect.
• Immediate Consumption: The effect of hydrogen in water is not long-lasting; it is best to drink the hydrogen-rich water immediately after generation.
• Sensitive Button: Be mindful of the sensitive power button to avoid accidentally turning on the generator when not in use or without water.
• Avoid Running Dry: Never operate the generator without water to prevent damage.

10. Warranty and Support

For any problems or questions regarding the use of your ALTHY H2-007 Performance Hydrogen Water Generator Bottle, please contact customer support via email at althyserve@aliyun.com.

Please refer to the official product page or contact the seller for specific warranty period details.

A user manual in PDF format is available for download: View User Manual (PDF)