1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LeekooLuu WiFi HD Car Camera. This versatile camera is designed for various vehicles, including RVs, cars, and pickup trucks, offering features like solar charging, 720P HD resolution, infrared night vision, and a wide-angle view. Its magnetic design and IP67 waterproof rating ensure ease of use and durability in diverse environments.
2. Package Contents
Please verify that all items listed below are included in your package:
- WiFi Backup Camera Unit
- User Manual (this document)
- Type-C Power Cable
- Antenna
3. Specifications
| Feature | Specification |
|---|---|
| Resolution | 720P HD (1280*720, 1.0 Megapixel) |
| Night Vision | Infrared Night Vision (HD black and white), Automatic gain control, automatic white balance, automatic backlight compensation |
| Video Signal | 2.4G WiFi |
| Battery Capacity | 10,000 mAh (18650 lithium batteries) |
| Charging | Solar Charging |
| Waterproof Rating | IP67 |
| Lens | 6 glass lens, Wide Angle View |
| Mounting | Magnetic design |
| Minimum Illumination | 0.01 Lux |
| Signal to Noise Ratio | ≥69dB |
| Operating Temperature | -22°F to 176°F (-30°C to 80°C) |
| Material | Metal |
4. Setup Instructions
4.1. Installation
The camera features a strong magnetic base for easy, drill-free installation. Simply attach the camera to any metal surface on your vehicle where it can be securely adsorbed. This allows for flexible placement and easy removal when not in use.
4.2. Charging
The camera is equipped with a solar panel for continuous charging. Under normal sunlight conditions, the camera will replenish its battery energy, eliminating the need for frequent manual charging. For initial setup or prolonged periods without sufficient sunlight, use the provided Type-C cable to charge the 10,000 mAh lithium battery.
4.3. App Connection
To use the camera, you need to connect it to your mobile device via WiFi. The camera uses a 2.4G WiFi signal for stable connection and clear image transmission with low latency.
- Download the companion application, named BackCam, to your mobile device. You may find a QR code in the included manual for direct download.
- Power on the camera.
- On your mobile device, go to WiFi settings and connect to the camera's WiFi network.
- Open the BackCam app to view the live monitoring screen.
5. Operating Instructions
5.1. Live View and Video Recording
Once connected to the BackCam mobile app, you can view the live feed from the camera. The app also supports video recording, allowing you to capture and save important moments directly from the camera screen.
5.2. Night Vision
The camera is equipped with an infrared night vision module, enabling clear visibility in low-light or no-light environments. It automatically adjusts for optimal image quality at night.
5.3. Wide Angle View
The camera features a wide-angle lens, providing a panoramic view to expand your field of vision and capture more detailed images of your surroundings.
5.4. Backup Assistance Features
Through the mobile app, you can access additional functions to assist with reversing, such as:
- Assistant Line On/Off: Toggle parking guidelines for precise maneuvering.
- Picture Flipping: Adjust the image orientation as needed for front or rear view applications.
- Taking Photos: Capture still images from the live feed.
6. Maintenance
6.1. Cleaning
Regularly clean the camera lens and solar panel to ensure optimal performance. Use a soft, damp cloth to wipe away dust and dirt. Avoid abrasive cleaners or materials that could scratch the lens or panel.
6.2. Waterproofing
The camera has an IP67 waterproof rating, meaning it is protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. It is designed to operate reliably in various weather conditions, including wind and rain.
6.3. Battery Care
While the solar panel provides continuous charging, ensure the camera receives sufficient sunlight. If storing the camera for extended periods, fully charge the battery beforehand and recharge periodically to maintain battery health.
7. Troubleshooting
- No image on app / Connection issues:
- Ensure the camera is powered on and fully charged.
- Verify that your mobile device is connected to the camera's 2.4G WiFi network.
- Restart both the camera and your mobile device.
- Ensure the 'BackCam' app is installed and up to date.
- Poor signal strength / Disconnections:
- The 2.4G WiFi signal range can be affected by obstacles and distance. Try to minimize the distance between the camera and your mobile device.
- For larger vehicles like trailers, the signal might not reach the cabin effectively. Consider repositioning the camera or using a WiFi extender if available (not included).
- Night vision unclear:
- Ensure the camera lens is clean and free from obstructions.
- The night vision is infrared (black and white); this is normal operation.
8. User Tips
- App Download: If you cannot find the 'BackCam' app on your app store, look for a QR code in the physical manual included with your product. Scanning this QR code should direct you to the correct download link for Android or iOS.
- Magnetic Mounting: The strong magnetic base allows for quick repositioning. Experiment with different mounting locations to find the optimal view for your specific vehicle and situation. Remember to remove the camera when not in use or when parking in areas where theft might be a concern.
- Solar Charging Efficiency: For best results, ensure the solar panel is exposed to direct sunlight for several hours daily. Angle the panel to maximize sun exposure if possible.
- Video Recording: Utilize the in-app video recording feature to save footage of critical moments, such as parking maneuvers or incidents.
9. Frequently Asked Questions (FAQ)
- Q: What app is used for this camera on Android?
- A: The companion app is called 'BackCam'. Please refer to the QR code in the instruction manual for download links if you cannot find it in the app store.
- Q: Does the camera record videos?
- A: Yes, after connecting to the mobile app, you can click to record the camera screen within the app to save important screen moments.
- Q: Can it connect to any Wi-Fi monitor?
- A: The camera is designed to connect to mobile devices (smartphones/tablets) via its dedicated 2.4G WiFi signal and the 'BackCam' app. Compatibility with other generic Wi-Fi monitors is not guaranteed.
- Q: Is the signal strong enough for a trailer, from the cabin to the rear?
- A: The camera uses a 2.4G WiFi signal. While generally stable, signal strength can be affected by distance and vehicle structure. For long trailers, the signal might be attenuated. Testing the range in your specific setup is recommended.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the official LeekooLuu website. Keep your purchase receipt as proof of purchase for any warranty claims.
