Introduction
This manual provides essential information for the installation, operation, and maintenance of your replacement case cover fan for Minisforum MINI PCs. This fan is designed as a direct replacement for the original fan in compatible Minisforum models, ensuring optimal cooling performance.
Important Note:
This product is a replacement fan and not an original Minisforum component. It is designed to function identically to the original fan. Please verify your specific Minisforum MINI PC model before proceeding with installation.

Image: Text overlay stating "Note: Our fan is a replacement fan. not an original fan. It can be used the same as the original fan."
Compatibility
This replacement fan is compatible with the following Minisforum MINI PC models:
- Minisforum UM790 XTX
- Minisforum UM790 Pro
- Minisforum UM880 Pro
- Minisforum UM890 Pro
- Minisforum UM690 Pro
Before installation, please ensure your MINI PC model matches one of the listed compatible models. If you have disassembled pictures of your current fan, sending them for verification can help ensure you purchase the correct product.

Image: The replacement fan with text overlays indicating compatibility with Minisforum UM790 XTX, UM790 Pro, UM880 Pro, UM890 Pro, and UM690 Pro.
Setup and Installation
Installing the replacement fan requires careful handling of your MINI PC components. If you are not comfortable performing this procedure, it is recommended to seek assistance from a qualified technician.
Safety Precautions:
- Always disconnect the MINI PC from the power source and all peripherals before opening the case.
- Discharge any static electricity by touching a grounded metal object before handling internal components.
- Use appropriate tools to avoid damaging screws or plastic parts.
- Keep track of all screws and components removed during disassembly.
Installation Steps (General Guidance):
- Prepare the Work Area: Ensure a clean, well-lit, and static-free environment.
- Access the Internal Components: Carefully open your Minisforum MINI PC case according to its specific model's service manual or online guides. This typically involves removing screws from the bottom or sides and gently prying open the cover.
- Locate the Existing Fan: Identify the fan that needs replacement. Note its orientation and how it is connected.
- Disconnect the Old Fan: Gently disconnect the fan's power cable from the motherboard. This is usually a small, multi-pin connector. Carefully remove any screws or clips securing the old fan.
- Remove the Old Fan: Lift the old fan out of its position.
- Install the New Fan: Place the new replacement fan into the designated slot, ensuring it is correctly oriented.
- Secure the New Fan: Fasten the new fan with the screws or clips previously removed.
- Connect the New Fan: Carefully connect the new fan's power cable to the corresponding header on the motherboard. Ensure the connector is fully seated.
- Reassemble the MINI PC: Carefully close the MINI PC case, ensuring all cables are clear and no components are pinched. Reinsert all screws.
- Power On and Test: Reconnect the power supply and peripherals. Power on the MINI PC and observe the fan operation. Ensure it spins freely and quietly.
For detailed, model-specific disassembly and reassembly instructions, please refer to the official Minisforum service manual for your particular MINI PC model.
Operating Instructions
Once installed, the replacement fan operates automatically, controlled by your Minisforum MINI PC's system. Its primary function is to dissipate heat generated by internal components, maintaining optimal operating temperatures.
Normal Operation:
- The fan will adjust its speed based on the system's thermal load. During light tasks, it may spin slowly or even stop. During intensive tasks (e.g., gaming, video editing), it will spin faster to increase airflow and cooling.
- A slight whirring sound is normal during operation, especially at higher speeds.
Monitoring Fan Performance:
You can use system monitoring software (often pre-installed or available from Minisforum/third-party developers) to check fan speed and system temperatures. This can help confirm proper fan operation.
Maintenance
Regular maintenance helps ensure the longevity and efficiency of your replacement fan and MINI PC.
Cleaning:
- Frequency: It is recommended to clean the fan and heatsink every 6-12 months, or more frequently if the PC is used in a dusty environment.
- Procedure:
- Disconnect the MINI PC from power.
- Open the case as described in the installation steps.
- Using compressed air, gently blow dust away from the fan blades and heatsink fins. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
- Use a soft brush or cotton swab to remove stubborn dust.
- Ensure all dust is removed from the fan and surrounding vents before reassembling.
Inspection:
- Periodically check for any unusual noises coming from the fan, which could indicate a bearing issue.
- Ensure the fan cable is securely connected and not obstructing the fan blades.
Troubleshooting
If you encounter issues with your replacement fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan not spinning |
|
|
| Excessive noise from fan |
|
|
| PC overheating |
|
|
Specifications
| Feature | Detail |
|---|---|
| Item Condition | New |
| Item Type | Replacement MINI PC Case Cover Fan / Laptop Cooling Fan |
| Compatible Brand | Minisforum |
| Compatible Models | UM790 XTX, UM790 Pro, UM880 Pro, UM890 Pro, UM690 Pro |
| Voltage | DC12V |
| Current | 0.4A |
| Part Number | 3654 |
| Fan Brand (Possible) | XMSJ / RTDPART |
| Origin | Mainland China |
| Certification | None |

Image: A detailed view of the replacement MINI PC case cover fan.
Warranty and Support
Warranty:
This product comes with a 3-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please retain your proof of purchase for warranty claims.
Customer Support:
For any questions regarding installation, troubleshooting, or warranty claims, please contact the seller or your point of purchase. Providing details of your MINI PC model and any relevant pictures can help expedite support.
User Tips
No specific user tips were available from reviews or Q&A for this product. However, general advice for PC component replacement includes:
- Always double-check compatibility with your specific Minisforum model before attempting installation.
- Take photos during disassembly to aid in reassembly.
- Keep screws organized to ensure they are returned to their correct locations.
- If unsure about any step, consult online guides or professional assistance.