XINYI Sini Audio XY-S220H

Contents

XY-S220H 2.1 Channel Bluetooth Audio Amplifier Module

User Instruction Manual

1. Introduction

The XINYI Sini Audio XY-S220H is a versatile 2.1 channel Bluetooth audio amplifier module designed for high-fidelity sound reproduction. Featuring Bluetooth 5.1 connectivity, multiple audio input options (AUX, USB flash drive, USB sound card), and powerful output for stereo channels and a subwoofer, this module is ideal for DIY audio projects and upgrading existing sound systems. It incorporates the TDA7498E dual BTL D-class audio amplifier chip, ensuring high power output and HIFI sound quality with built-in protection mechanisms.

XY-S220H Amplifier Module Front View
Figure 1: XY-S220H Amplifier Module (Front View)

2. Safety Information

  • Ensure the power supply voltage and current are within the specified range (DC12-38V/10A or above). Incorrect power can damage the module.
  • Avoid short circuits between output terminals or with ground.
  • Do not operate the module in wet environments or expose it to water.
  • Keep the module away from high temperatures and direct sunlight.
  • Handle with care to prevent electrostatic discharge (ESD) damage.
  • Ensure proper ventilation, especially when operating at high power, to prevent overheating.

3. Package Contents

Upon opening your XY-S220H amplifier module package, you should find the following items:

  • XY-S220H Amplifier Board
  • Acrylic Top Panel (with product name and tuning labels)
  • Acrylic Bottom Panel (with product specifications)
  • Control Knobs (for volume, treble, bass, subwoofer)
  • Mounting Hardware (screws, standoffs)
  • Small Screwdriver
XY-S220H Amplifier Module Kit Contents
Figure 2: XY-S220H Kit Contents
XY-S220H Amplifier Module Specification Panel
Figure 3: XY-S220H Specification Panel

For a visual guide on unboxing and assembling the acrylic case, please refer to the video below:

Video 1: Unboxing and Assembly of the XY-S220H Amplifier Module

4. Specifications

FeatureDescription
Product ModelXY-S220H
Product Name2.1 Channel Bluetooth Audio Amplifier Board
Power SupplyDC12-38V/10A or above
Bluetooth Version5.1
Audio Channels2.1 channels
Audio InputBluetooth, AUX, USB flash drive, USB sound card
Audio OutputLeft & Right Channels + Subwoofer
Frequency Range20Hz-20KHz
Volume AdjustmentHigh-end encoder knob adjustment
Max Output Power (R&L Channels)160W/4Ω (36VDC), 80W/8Ω (36VDC)
Max Output Power (Subwoofer)220W/3Ω (36VDC), 160W/4Ω (36VDC)
Protection MechanismsOvervoltage, Undervoltage, Clipping, Short Circuit, Overheating
Unique FeatureSupports Sinilink APP for Bluetooth name modification, password setting, prompt sound control
Product Dimensions134mm x 126mm x 26mm
Product Weight365g
Amplifier ChipTDA7498E (Dual BTL D-class)
XY-S220H Amplifier Module Dimensions
Figure 4: XY-S220H Amplifier Module Dimensions
XY-S220H Amplifier Board Components
Figure 5: Detailed view of the amplifier board, highlighting the TDA7498E chip and other components.

5. Setup

5.1 Assembly of Acrylic Case

Before connecting, assemble the acrylic top and bottom panels to protect the circuit board. Use the provided standoffs and screws to secure the panels to the amplifier board. Ensure the panel with the product name and knob labels is on top, and the panel with specifications is on the bottom. Attach the control knobs to their respective shafts.

5.2 Wiring Connections

Refer to the wiring diagram below for proper connections. Incorrect wiring can damage the module or connected devices.

XY-S220H Wiring Diagram
Figure 6: Wiring Diagram for Power, Speakers, and Audio Input
  1. Power Supply: Connect a DC12-38V/10A or above power supply to the 'DC IN' terminals. Ensure correct polarity (+ and -).
  2. Speaker Connections:
    • Left & Right Channels: Connect your passive stereo speakers (10-160W/4-8Ω) to the 'SPKL' (Left) and 'SPKR' (Right) terminals. Observe polarity.
    • Subwoofer: Connect your passive subwoofer (20-220W/3-8Ω) to the 'WOOFER' terminals. Observe polarity.
  3. Audio Input: The module supports multiple input methods:
    • Bluetooth: The default input mode. Pair your device as described in the Operating Instructions.
    • AUX: Connect an external audio source (e.g., phone, MP3 player) via a 3.5mm audio cable to the AUX input jack.
    • USB Flash Drive: Insert a USB flash drive containing audio files into the USB port.
    • USB Sound Card: Connect the module to a computer via a USB cable to use it as an external sound card.

6. Operating Instructions

6.1 Basic Operation

  1. Power On: Once all connections are secure and the power supply is connected, the module will power on automatically.
  2. Volume Adjustment: Use the large central encoder knob to adjust the master volume. Turn clockwise to increase, counter-clockwise to decrease.
  3. Tone Control: Use the smaller encoder knobs to adjust Treble, Bass, and Subwoofer volume/frequency.
  4. Input Selection: The module automatically switches between inputs. Bluetooth is usually prioritized. To switch, disconnect the current input or use the Sinilink APP.

6.2 Bluetooth Pairing

  1. Ensure the module is powered on and no other audio input is active.
  2. On your mobile device, search for Bluetooth devices. The module will appear as 'XINYI Sini Audio' (or a custom name if changed via APP).
  3. Select the module to pair. A prompt sound will confirm successful connection.

The XY-S220H supports control via the Sinilink APP, allowing for advanced customization and control. Download the 'Sinilink' APP from your device's app store.

Sinilink APP Interface for XY-S220H
Figure 7: Sinilink APP Interface for Bluetooth Control
  • Modify Bluetooth Name: Customize the Bluetooth name of your module for easier identification.
  • Set Bluetooth Password: Add a password to your Bluetooth connection for enhanced security.
  • Turn Off/On Prompt Sound: Control the audible prompts from the module.
  • Playback Mode: Select between different audio input modes (SD card, USB, Bluetooth, AUX).
  • Sound Effects: Apply various equalizer presets such as Normal, Rock, Pop, Classical, Jazz, Country.
  • Volume Adjustment: Digital volume control via the app.
  • Playback Controls: Previous track, Next track, Play/Pause functionality.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the module. Do not use liquid cleaners or solvents.
  • Storage: Store the module in a cool, dry place away from direct sunlight and extreme temperatures.
  • Ventilation: Ensure the heatsink is free from dust and debris to maintain optimal cooling.
  • Connections: Periodically check all wiring connections for tightness and corrosion.

8. Troubleshooting

  • No Power:
    • Check if the power supply is connected correctly and providing the specified voltage (DC12-38V) and current (10A or above).
    • Ensure the power adapter is functional.
  • No Sound Output:
    • Verify all speaker connections are secure and correctly polarized.
    • Check the audio input source (Bluetooth, AUX, USB) is properly selected and active.
    • Ensure the volume knobs (master, treble, bass, subwoofer) are not set to minimum.
    • Test with a different audio source or speakers to isolate the problem.
  • Bluetooth Not Connecting/Pairing:
    • Ensure the module is within range of your Bluetooth device.
    • Disconnect any other devices currently paired with the module.
    • Try restarting both the module and your Bluetooth device.
    • If a password is set via the Sinilink APP, ensure you are entering it correctly.
  • Distorted Sound:
    • Reduce the master volume. Overdriving the amplifier or speakers can cause distortion.
    • Check that your speakers' impedance and power ratings are compatible with the amplifier's output.
    • Ensure the power supply is stable and sufficient.
    • Check audio cables for damage or poor connections.
  • Overheating:
    • Ensure the module has adequate ventilation and the heatsink is not obstructed.
    • Reduce the output power or operating time.
    • Verify speaker impedance is not too low.

9. User Tips

  • Power Supply Quality: Using a high-quality, stable power supply with sufficient current (10A or more) is crucial for optimal performance and to prevent distortion, especially at higher volumes.
  • Speaker Matching: Pay close attention to matching your speakers' impedance and power handling capabilities with the amplifier's output specifications to achieve the best sound and prevent damage.
  • Cable Quality: Invest in good quality audio and speaker cables to minimize signal loss and interference.
  • Enclosure: While the acrylic case provides basic protection, consider integrating the module into a custom enclosure for better aesthetics and long-term durability, especially if it will be frequently handled.
  • APP Customization: Explore the Sinilink APP features to fine-tune your audio experience, including custom Bluetooth names and sound effects.

10. Support

For further assistance or inquiries regarding your XY-S220H amplifier module, please contact the seller or manufacturer directly through the platform where the product was purchased.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.