JX-07 Remote Control Page Turner User Manual

1. Introduction

The JX-07 Remote Control Page Turner is a versatile wireless device designed to enhance your digital reading, media consumption, and photography experience. It consists of a main clicker unit that attaches to your device's screen and a wearable fingertip ring remote control. This manual provides instructions for setup, operation, maintenance, and troubleshooting.

2. Package Contents

Please check the package for the following items:

• 1 x Clicker Unit
• 1 x Fingertip Ring Remote Control
• 1 x Type-C Data Cable

3. Product Overview

Familiarize yourself with the components of your JX-07 device:

• Clicker Unit: Attaches to your device screen. Features an on/off switch, signal indicator light, and a silicone protective pad to prevent screen damage.
• Fingertip Ring Remote Control: Worn on your finger for convenient control. Includes defined keys for various functions and a signal indicator light.

4. Setup

1. 4.1 Charging the Device

   Before first use, fully charge both the clicker unit and the fingertip ring remote control using the provided Type-C data cable.

   • Connect the Type-C cable to the charging port on both units.
   • Connect the other end of the cable to a DC5V power source (e.g., USB wall adapter, computer USB port).
   • Charging time is approximately 2 hours. The signal indicator light will typically change or turn off when fully charged.

   

2. 4.2 Attaching the Clicker Unit

   The clicker unit features a strong, elastic clamp with anti-slip silicone protective pads. It is designed for wide compatibility with various devices.

   • Gently open the clamp of the clicker unit.
   • Position the clicker unit on the edge of your e-reader, tablet, or smartphone screen, ensuring the contact point aligns with the area you would normally tap to turn pages or interact.
   • The silicone pads should be in contact with your device to prevent damage and ensure a secure fit.

   

   

3. 4.3 Powering On and Pairing

   • Locate the on/off switch on the side of the clicker unit and slide it to the 'On' position.
   • The signal indicator light on both the clicker and the ring remote should illuminate, indicating they are powered on and ready for use.
   • The devices are pre-paired. No complex software or pairing process is typically required.

   

5. Operating Instructions

The JX-07 offers versatile control for various applications:

1. 5.1 Page Turning for E-readers/Tablets/Phones

   Once the clicker unit is attached and both devices are powered on, use the defined keys on the fingertip ring remote to control page navigation.

   • Press the 'Up' button (usually the top button) to turn to the previous page.
   • Press the 'Down' button (usually the bottom button) to turn to the next page.
   • The middle button may offer additional functionality depending on the application.

   

   

2. 5.2 Camera Remote Control

   The JX-07 can also function as a remote trigger for your device's camera.

   • Open your device's camera application.
   • Position the clicker unit to simulate a tap on the shutter button area of your screen.
   • Press one of the defined keys on the fingertip ring remote to remotely trigger the camera shutter.

3. 5.3 Video Recording Control

   Use the JX-07 to start and stop video recording remotely.

   • Open your device's camera application and switch to video recording mode.
   • Position the clicker unit to simulate a tap on the record/stop button.
   • Press a defined key on the fingertip ring remote to start or stop recording.

   

6. Maintenance

• Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it regularly, especially if not used for extended periods.

7. Troubleshooting

• Device not responding:
  • Ensure both the clicker unit and the remote control ring are powered on.
  • Check battery levels and recharge if necessary.
  • Ensure the clicker unit is properly positioned on the screen, making good contact with the intended tap area.
  • Verify that the remote control is within the 5-meter operating range.
• Page turning is inconsistent:
  • Adjust the position of the clicker unit on your screen. Different apps or devices may have slightly different tap areas for page turning.
  • Ensure the screen is clean and free of debris that might interfere with the clicker's contact.
• Charging issue:
  • Ensure the Type-C cable is securely connected to both the device and the power source.
  • Try a different Type-C cable or power adapter.

8. Specifications

9. User Tips

• Optimal Placement: Experiment with the clicker's position on your screen to find the most responsive spot for page turning or camera control in different applications.
• Battery Management: For long reading sessions, consider charging the device during breaks to ensure continuous use.
• Multi-device Use: The universal compatibility allows you to easily switch between your e-reader, tablet, and phone. Just reposition the clicker unit as needed.
• Camera Stability: When using as a camera remote, ensure your device is on a stable surface or tripod for best results.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.