POWER TRAIN M1

Contents

POWER TRAIN X-Gamerx M1 Portable PC Case User Manual

Model: M1 | Brand: POWER TRAIN

1. Product Overview

The POWER TRAIN X-Gamerx M1 is a compact and portable PC case designed for M-ATX and ITX motherboards, featuring a transparent tempered glass side panel and efficient heat dissipation. Its robust construction and thoughtful design make it suitable for gaming and desktop applications.

POWER TRAIN X-Gamerx M1 PC Case in black and white, highlighting key features.
Figure 1: M1 PC Case Overview (Black and White models shown, highlighting M-ATX/ITX support, 330mm GPU length, 163mm CPU height, 0.7mm thick plate, and heat dissipation stripe design).
Close-up of the M1 PC case's top handle.
Figure 2: Convenient handle design for easy portability.

2. Setup and Installation

2.1 Unpacking and Preparation

Carefully remove the PC case from its packaging. Inspect for any damage. Keep all accessories and screws organized for installation.

2.2 Side Panel Removal

The tempered glass side panel features a snap-on design for tool-free disassembly. Gently pull the panel to detach it from the chassis.

Diagram showing how to remove the tempered glass side panel from the M1 PC case.
Figure 3: Tempered glass side panel removal, illustrating the tool-free snap-on mechanism.

2.3 Motherboard and CPU Cooler Installation

Install your M-ATX or ITX motherboard into the chassis. Ensure the CPU cooler height does not exceed 163mm.

2.4 Power Supply Installation

The M1 case supports both ATX and SFX power supplies. Utilize the patented adjustable power bracket to secure your power supply and prevent deformation or shaking.

Diagram showing the adjustable power supply bracket in the M1 PC case.
Figure 4: Patented power bracket design with movable adjustment to adapt to different ATX or SFX power supplies, protecting the power transport frame from deformation and preventing shaking.

2.5 Graphics Card Installation

The case supports graphics cards up to 330mm in length. Refer to the installation plans below for optimal configuration based on your power supply and storage setup.

Diagram for HDD and graphics card installation plan 1 in the M1 PC case.
Figure 5: Hard disk/graphics card solution 1: ATX power supply (length 140mm), supports graphics card up to 270mm, with 3.5" HDD * 2 and 2.5" SSD * 2.
Diagram for HDD and graphics card installation plan 2 in the M1 PC case.
Figure 6: Hard disk/graphics card solution 2: ATX power supply (length 120-125mm) or SFX power supply, supports graphics card up to 330mm (after installing the hard drive horizontally), with 3.5" HDD * 1.

2.6 Storage Drive Installation

The case offers flexible storage options:

  • Option 1: One 3.5" HDD and two 2.5" SSDs.
  • Option 2: Two 3.5" HDDs and two 2.5" SSDs (if no bottom fans are installed).

2.7 Cooling System Installation

The M1 case supports multiple 120mm fans (fans sold separately) for optimal airflow:

  • Front: Two 120mm fans (15mm thick).
  • Top: Two 120mm fans.
  • Rear: One 120mm fan.
  • Bottom: Two 120mm fans.
Diagram illustrating the ventilation duct and fan placement in the M1 PC case.
Figure 7: Excellent ventilation duct design showing recommended fan placements and airflow: two 120mm fans pushing air out at the top, one 120mm fan following at the rear, two 120mm fans advancing at the front (15mm thick), and two optional 120mm fans at the bottom.

2.8 Front Panel Connections

Connect the front panel cables to your motherboard. The front panel includes:

  • Power button
  • USB 3.0 port
  • HDAUDIO (2-in-1 audio jack)
  • Reserved TYPE-C port
Diagram of the M1 PC case's front panel peripheral ports.
Figure 8: Peripheral port design on the front panel, showing the Power button, USB3.0, Audio jack (2-in-1), and Reserved TYPE-C port for fast and uninterrupted information transmission.

3. Operation

Once all components are installed and connected, close the side panel. Connect your peripherals (monitor, keyboard, mouse) and power cable. Press the power button on the front panel to start your system.

4. Maintenance

4.1 Cleaning

To maintain optimal performance and longevity, regularly clean your PC case. The M1 features a magnetic dust-proof screen that can be easily disassembled and reassembled for cleaning.

Image showing the magnetic dust-proof screen of the M1 PC case.
Figure 9: Magnetic dust-proof screen, highlighting its breathable, fine pores, and insect repellent properties for effective heat dissipation and easy maintenance.

Use compressed air to remove dust from internal components and fans. Wipe exterior surfaces with a soft, damp cloth.

4.2 Airflow

Ensure that the case's ventilation areas are not obstructed to allow for proper airflow and heat dissipation.

Diagram showing airflow through the solid-panel design of the M1 PC case.
Figure 10: Solid-panel design with perforated sections for excellent heat dissipation, illustrating airflow through the side panel.

5. Troubleshooting

If you encounter issues with your PC build, consider the following common troubleshooting steps:

  • No Power: Double-check all power connections, including the power supply unit (PSU) to the wall outlet, the PSU to the motherboard, and the front panel power switch cable to the motherboard header.
  • No Display: Ensure your monitor is correctly connected to the graphics card (not the motherboard's integrated graphics ports, unless you are using integrated graphics). Re-seat the graphics card and RAM modules.
  • Overheating: Verify that all fans are spinning correctly and installed in the correct orientation for optimal airflow (refer to Section 2.7). Clean any dust from filters and components. Ensure CPU cooler is properly seated.
  • Loose Connections: If components are not detected or behaving erratically, power down the system and carefully re-seat all internal cables (SATA, PCIe, power cables) and components (RAM, GPU).

6. Specifications

Detailed specifications for the POWER TRAIN X-Gamerx M1 PC Case:

FeatureSpecification
Product NameM1
Brand NamePOWER TRAIN
Model NumberM1
Chassis TypeDesktops (Mid Tower)
Case Size (L*W*H)369 * 189 * 323mm
Case Weight5kg
MaterialAluminum Alloy, Tempered glass, others (SPCC 0.7mm thick)
Chassis Color OptionsBlack, White
Motherboard SupportM-ATX, ITX
Max GPU Length330mm
Max CPU Cooler Height163mm
Power Supply MountedBottom
Power Model SupportATX (max 150*140*86mm), SFX (max 125*100*64mm)
Max PSU Length150mm
Internal 3.5" Drive Bays1 (or 2 if no bottom fans)
Internal 2.5" Drive Bays2 (or 2 if no bottom fans)
Hot-Swap Drive Bays4
PCI Slots4
Side Panel WindowYes (Tempered Glass, Left side)
Front PortsUSB3.0, HDAUDIO, Reserved TYPE-C
RGB SupportNO RGB (case itself)
Cooling System (Fan Support)Front: 2x 120mm (15mm thick), Top: 2x 120mm, Rear: 1x 120mm, Bottom: 2x 120mm (Fans not included)
Radiator Size Support120 MM
Dimensions of the M1 PC case: 369mm length, 189mm width, 323mm height.
Figure 11: M1 PC Case dimensions (369*189*323mm).
Exploded view of the M1 PC case showing its L-shaped integrated side-bending design.
Figure 12: L-shaped integrated side-bending design, illustrating the smooth curves and exquisite details of the case structure.

7. User Tips

  • Cable Management: Utilize the available space and tie-down points within the chassis to manage cables effectively. Good cable management improves airflow and aesthetics.
  • Fan Selection: While the case supports various fan configurations, consider using high static pressure fans for areas with restricted airflow (like front intake behind a solid panel) and high airflow fans for exhaust.
  • Portability: The integrated handle makes the M1 highly portable. When transporting, ensure all internal components are securely fastened to prevent damage.
  • Dust Filter Cleaning: Regularly clean the magnetic dust filter to maintain optimal cooling performance and prevent dust buildup inside the case.

8. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.