Navceker ZY-AD9TR

Contents

Navceker ZY-AD9TR 60m Wireless HDMI Transmitter and Receiver Extender Kit

Model: ZY-AD9TR

Introduction

The Navceker ZY-AD9TR Wireless HDMI Transmitter and Receiver Extender Kit provides a seamless solution for extending high-definition video and audio signals wirelessly. This system eliminates the need for messy cables, offering a plug-and-play experience for various applications. It supports resolutions up to 1080P Full HD and is designed for reliable transmission within a range of up to 60 meters (196 feet) using 2.4GHz/5GHz dual-band technology.

Video: Navceker ZY-AD9TR Wireless HDMI Kit Overview

Navceker ZY-AD9TR Wireless HDMI Transmitter and Receiver units

Image: The Navceker ZY-AD9TR Wireless HDMI Transmitter and Receiver units.

Package Contents

  • 1 x Wireless HDMI Transmitter
  • 1 x Wireless HDMI Receiver
  • 2 x USB to USB Type-C Power Cables
  • 1 x User Manual

Setup Instructions

The Navceker ZY-AD9TR is designed for easy plug-and-play installation without the need for Wi-Fi, apps, or Bluetooth. Follow these steps to set up your wireless HDMI system:

Step-by-step installation guide for Navceker Wireless HDMI Kit

Image: Visual guide for connecting the transmitter and receiver.

  1. Install Receiver (RX):
    • Connect the HDMI end of the receiver to an HDMI input port on your display device (e.g., TV, projector, monitor).
    • Power up the receiver using the provided USB to USB Type-C cable. Connect the USB-C end to the receiver and the USB-A end to a 5V power source (e.g., TV's USB port, USB wall adapter).
    • Position the receiver where it has a clear line of sight or minimal obstruction to the transmitter for optimal signal.
  2. Install Transmitter (TX):
    • Connect the HDMI end of the transmitter to the HDMI output port of your signal source (e.g., PC, laptop, camera, TV box).
    • Power up the transmitter using the provided USB to USB Type-C cable. Connect the USB-C end to the transmitter and the USB-A end to a 5V power source (e.g., laptop's USB port, USB wall adapter).
  3. Status Display:
    • After connecting and powering both units, the LED light on both the transmitter and receiver will flash.
    • The system will automatically connect, and the screen will cast after a few seconds. The LED display will show the connection status, signal strength, and video/voice output status.
Plug and Play feature with no app, settings, Wi-Fi, or Bluetooth required

Image: The system features a simple plug-and-play design, requiring no additional software or network configuration.

Operating Instructions

Once the transmitter and receiver are successfully connected, the system will automatically begin mirroring your source device's display to the connected screen. You can utilize the device in various modes and scenarios:

LED Screen Status

The integrated LED screen on both units provides real-time information about the connection status and signal strength:

LED Screen Status indicators for connection, signal, HD, breakdown, TX/RX, and power

Image: Detailed view of the LED screen indicators.

  • CONNECTED: Indicates a successful connection between TX and RX.
  • HD: Shows that an HD signal is being transmitted.
  • SIGNAL: Displays the current signal strength (multiple bars for strong signal).
  • BREAKDOWN: Alerts to a potential issue or signal interruption.
  • TX/RX: Identifies the unit as a Transmitter or Receiver.
  • Display Power Supply Status: Indicates if the unit is receiving power.

Display Modes: Duplicate and Extended

The system supports both Duplicate (Mirror) and Extended display modes, depending on your source device's display settings. You can switch between these modes via your computer's display settings.

Illustration of Copy Mode (Mirror) and Extended Mode

Image: Comparison of Copy Mode (Mirror) and Extended Mode functionality.

  • Duplicate Mode (Mirror): The external display shows the same content as your source device's screen. Ideal for presentations or sharing content directly.
  • Extended Mode: The external display acts as an extension of your source device's screen, allowing you to have more desktop space and multitask.

Wide Application

This wireless HDMI kit is suitable for a variety of environments and uses:

Diagram showing wide application and compatibility with various devices

Image: The system's compatibility with various source devices (PC, Laptop, Phone, Camera, Pad, TV Box) and display devices (TV, Projector, Monitor, LED Display).

  • Teaching & Meetings: Facilitate dynamic presentations and collaborative sessions.
  • Home Theater: Enjoy movies and games on a larger screen without cable clutter.
  • Outdoor Events: Project content for outdoor movie screenings or presentations.
  • Churches & Live Broadcasts: Display sermons or event content to larger audiences.
Multi-Scenario Application examples including teaching, meeting, outdoor, home theater, and church

Image: Examples of multi-scenario applications for the wireless HDMI kit.

Maintenance

To ensure the longevity and optimal performance of your Navceker ZY-AD9TR Wireless HDMI Kit, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the transmitter and receiver. Avoid using liquid cleaners or solvents, as they may damage the devices.
  • Storage: When not in use, store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the units with care. Avoid dropping them or subjecting them to strong impacts.
  • Power Supply: Always use the provided USB to USB Type-C power cables and a stable 5V power source.

Troubleshooting

If you encounter issues with your Navceker ZY-AD9TR, refer to the following troubleshooting tips:

ProblemPossible CauseSolution
No signal on displayLoose connections, no power, incorrect input source, out of range.Ensure all HDMI and USB-C power cables are securely connected. Verify both TX and RX units are powered on. Select the correct HDMI input on your display device. Reduce the distance between TX and RX, or remove obstructions.
Poor video quality or flickeringWeak signal, interference, environmental obstructions.Check the signal strength indicator on the LED screen. Move TX and RX closer together. Ensure there are no thick walls, brick, or glass between the units. Avoid placing units near other wireless devices that may cause interference.
LED screen shows "BREAKDOWN"Connection error, hardware issue.Restart both the transmitter and receiver. Check all connections. If the issue persists, contact customer support.
High latency (delay)Environmental factors, distance, interference.While the device boasts low latency (<100ms), environmental factors can affect it. Ensure a clear line of sight and minimize distance. Reduce other 2.4GHz/5GHz wireless activity in the area.
No audioAudio settings, display device issue.Check the audio settings on your source device and display. Ensure the display's volume is not muted.

Note on Transmission Distance: The effective transmission range of 60 meters (196 feet) is for environments with no obstructions. Walls, brick, or glass will significantly shorten the signal range or cause substantial signal loss. For optimal performance, maintain a clear line of sight between the transmitter and receiver.

Illustration of 196FT/60M wireless transmission distance

Image: The wireless transmission distance of 196 feet (60 meters).

Specifications

FeatureSpecification
Model NumberZY-AD9TR
Brand NameNavceker
TypeHDMI-Compatible Cables
Connector AType-C, HDMI-Compatible (Male)
Connector BType-C, HDMI-Compatible (Male)
FeatureHDMI-Compatible 1.4
ResolutionUp to 1920*1080P@60Hz (4K decoding support)
Transmission Distance60m / 196ft (no obstruction)
Wireless Frequency5 GHz / 2.4GHz
LatencyLess than 100 ms
Audio Sampling Rate32kHz, 44.1kHz, 48kHz
Audio FormatDTS-HD/Dolby-true HD/LPCM7.1/DTS/DSD
Video StandardCompliance with HDMI 1.4 and HDCP 1.4 standard
Power SupplyType C USB, 5V
ShieldingNon-Shielded
Outer Diameter1mm
ApplicationProjector, DVD Player, For iPod, Camera, Computer, Multimedia, TV box, Monitor, Television, MP3 / MP4 Player, LCD, XBox, Apple TV
CertificationsCE, FCC, RoHS
Package TypeCarton Box
Product Weight0.15 kg
Package Dimensions25cm (L) x 17cm (W) x 8cm (H)
Summary of key features: Plug&Play, 1080PHD, 196FT, 5GHz/2.4GHz, 0.1S Latency

Image: Key features of the Navceker Wireless HDMI Kit.

Dual-band technology (5G and 2.4G) for stable transmission

Image: Illustration of the dual-band 5G and 2.4G technology for stable signal transmission.

User Tips

  • Optimal Placement: For the best performance and lowest latency, try to place the transmitter and receiver in a direct line of sight with minimal obstructions.
  • Power Source: Ensure both units receive stable 5V power. Using a dedicated USB wall adapter for power can sometimes be more reliable than a device's USB port, especially if the device's port has limited power output.
  • Latency for Gaming: While the device has low latency, for competitive gaming, a wired connection is generally preferred. For casual gaming or video streaming, the latency should be imperceptible.
  • Travel-Friendly: The compact and lightweight design makes it ideal for business trips, presentations, or family gatherings. Remember to pack both the TX and RX units along with their power cables.
Mini, portable, and lightweight design for business and home theater

Image: The compact design of the wireless HDMI kit, highlighting its portability.

Warranty and Support

The Navceker ZY-AD9TR Wireless HDMI Transmitter and Receiver Extender Kit comes with a one-year free warranty. For any technical support or warranty claims, please contact Navceker customer service through your purchase platform or the official Navceker website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.