JIKONG JK-B2A16S15P

Contents

JIKONG JK-B2A16S15P Smart BMS User Manual

Intelligent Active Balanced Battery Management System for Li-ion, LiFePo4, and LTO Batteries

1. Introduction

The JIKONG JK-B2A16S15P is an advanced Battery Management System (BMS) designed to provide intelligent protection and active balancing for various lithium battery chemistries, including Li-ion, LiFePo4, and LTO. This BMS supports battery configurations from 8S to 16S and offers a continuous discharge current of up to 150A, with 2A active balancing. It integrates multiple communication interfaces like CAN and RS485, and features comprehensive protection mechanisms to ensure the safety and longevity of your battery pack. This manual provides essential information for the proper installation, operation, and maintenance of your JIKONG Smart BMS.

JIKONG JK-B2A16S15P Smart BMS with included activate reset switch
Figure 1: JIKONG JK-B2A16S15P Smart BMS with included activate reset switch (50cm cable).

2. Packing List

Before installation, please verify that all components are present in your package:

Diagram of JIKONG BMS packing list components
Figure 2: Visual representation of the packing list components.
  1. BMS x 1
  2. Interface board x 1
  3. Adapter cable B x 1 (long 30cm)
  4. Adapter cable A x 1 (long 30cm)
  5. RS45 Network cable x 1 (long 40cm)
  6. Sampling line A x 2 (long 90cm)
  7. Sampling line B x 1 (long 90cm)
  8. Sampling line C x 1 (long 90cm)
  9. Switch x 1 (long 50cm)
  10. Adapter cable C x 1 (long 30cm)
  11. Heating Adapter cable x 1 (long 15cm)
  12. Adapter x 1

3. Setup and Installation

Careful installation is crucial for the safe and efficient operation of your BMS. Please follow these steps:

  1. Connect all the cables to the BMS.
  2. Insert the cable into the BMS.
  3. Connect the B-line and the P-line to the battery.
  4. Important: Note that there are two B8 cables. Only the first B8 cable needs to be connected. The second B8 cable does not need to be connected.
Wiring diagrams for 16-string and 8-string battery cells with the JIKONG BMS
Figure 3: Wiring methods for 16-string and 8-string battery cells. Ensure correct connection of B- and P-lines, and note the specific instruction for B8 cables.

3.1 Communication Interfaces

The BMS supports various communication modes for monitoring and control:

Diagram showing four communication modes and interface board details
Figure 4: Overview of communication modes (CAN, RS485, UART, RS232) and the interface board layout with sampling lines, heat function port, display/switch port, and various RJ45 sockets.

The interface board includes ports for:

  • Sampling lines (P1, P2)
  • Heat Function Port
  • Display or Switch Port
  • RS485-1 and RS485-2 RJ45 Sockets
  • RS232 Interface (6P6C RJ11 Socket)
  • CAN Interface
  • Dry Interface
  • Dial Switch
  • Switch

For PC communication, a USB to RJ45 connector is typically used:

USB to RJ45 connector for PC communication with JIKONG Interface Board
Figure 5: Connecting the JIKONG Interface Board to a computer via a USB to RJ45 connector.

4. Operating Instructions

4.1 Mobile App Control

The JIKONG BMS can be easily set up and monitored via a mobile application, compatible with iOS, Android, and HarmonyOS. The app provides a personal lithium battery steward, displaying all relevant information clearly.

Mobile app interface showing battery data, PC software, and JIKONG home storage display
Figure 6: Multi-screen display and data connection options, including mobile app, PC software, and dedicated home storage display.

Through the mobile app, you can view multiple parameters such as voltage, current, temperature, State of Charge (SOC), and cycle count. The app supports multiple languages, which can be switched automatically with your phone's system language.

4.2 PC Software Control

For more detailed monitoring and parameter adjustment, the BMS can be connected to a host computer via dedicated software. This allows for setting inverter communication protocols and advanced configurations.

PC software interface showing CAN protocol selection and various inverter brands
Figure 7: PC software interface for protocol docking, showing supported CAN protocols for various inverter brands like Deye, Pylontech, Growatt, Victron Energy, SOFAR, INVT, Goodwe, SMA, and SNE.

The PC software allows you to select and configure various CAN protocols to ensure compatibility with mainstream inverters.

4.3 Dedicated Display Units

Optional dedicated display units (e.g., 4.3-inch LCD or 3.2-inch display) can be connected to the BMS to provide real-time battery information at a glance.

JIKONG 4.3 Inch Display showing battery voltage, current, SOC, temperature, and cell balance status
Figure 8: JIKONG 4.3 Inch Display showing detailed battery status.
JIKONG 3.2 Inch Display showing battery voltage, current, SOC, and error indicators
Figure 9: JIKONG 3.2 Inch Display providing essential battery information.

4.4 Active Balancing

The JIKONG BMS features active balancing (lossless balancing) to optimize battery performance and prolong life. This is achieved through energy transfer, moving energy from cells with higher energy to cells with lower energy, achieving voltage balance with minimal energy loss.

Diagram illustrating active balancing in a battery pack
Figure 10: Active Balancing mechanism, showing energy transfer between cells to maintain balance.

Active balancing operates continuously whenever there is a voltage difference above a set threshold, regardless of whether the battery is charging, discharging, or idle. This process does not generate significant heat, allowing for larger balancing currents (1A-2A) compared to passive balancing systems.

5. Maintenance

To ensure the long-term reliability and performance of your JIKONG Smart BMS, consider the following maintenance guidelines:

  • Regular Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Environmental Conditions: Operate the BMS within its specified temperature and humidity ranges. Avoid exposure to extreme conditions, moisture, or direct sunlight.
  • Firmware Updates: Check the official JIKONG website or app for any available firmware updates. Keeping the firmware up-to-date can improve performance and add new features.
  • Cleaning: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
  • Heat Dissipation: Ensure adequate airflow around the BMS, especially if it is installed in an enclosed space. The aluminum alloy heat sink is designed to reduce temperature rise, but proper ventilation is still important.

6. Troubleshooting

If you encounter issues with your JIKONG Smart BMS, consider the following general troubleshooting steps:

  • No Power/Display: Check all power connections to the BMS and the battery. Ensure the activate reset switch (if included) is properly connected and activated.
  • Communication Issues: Verify that the communication cables (e.g., RS485, CAN) are correctly connected. Ensure the correct protocol is selected in the mobile app or PC software. Check for driver issues if using PC software.
  • Balancing Not Active: Confirm that cell voltages are within the range where active balancing should occur. Check app/software settings for balancing parameters.
  • Protection Triggered: If the BMS triggers a protection (e.g., overcharge, over-discharge, overcurrent), identify the cause (e.g., faulty cell, excessive load, charger issue) and rectify it before resetting the BMS.
  • App/Software Not Connecting: Ensure Bluetooth is enabled on your mobile device and the BMS is discoverable. For PC software, verify the USB-to-RJ45 adapter is working and drivers are installed.

For persistent issues, refer to the detailed troubleshooting section in the full product manual (if available) or contact JIKONG technical support.

7. Specifications

The following table outlines the key technical specifications for the JIKONG Smart BMS models, including the JK-B2A16S15P:

Table of JIKONG Product Specifications
Figure 11: Detailed JIKONG Product Specifications table.
Technical Index JK-PB1A16S10P JK-PB1A16S15P JK-PB2A16S15P JK-PB2A16S20P
Number of Battery Strings (Li-ion) 7S-16S 7S-16S 7S-16S 7S-16S
Number of Battery Strings (LiFePo4) 8S-16S 8S-16S 8S-16S 8S-16S
Number of Battery Strings (LTO) 14S-16S 14S-16S 14S-16S 14S-16S
Balance Method Active Balance (Full State On)
Balance Current 1A 1A 2A 2A
Conductive Resistance in Main Circuit 0.8mΩ 0.4mΩ 0.4mΩ 0.3mΩ
Continuous Discharge Current 100A 150A 150A 200A
Maximum Discharge Current (MAX 2min) 200A 300A 300A 350A
Over Charge Protection Current (ADJ) 10-100A 10-150A 10-150A 10-200A
Other Interfaces (Default) RS485/232/CAN
Wiring Output Common Port
Single Cell Voltage Range 1-5V
Voltage Acquisition Accuracy ±5mV
Over Charge Protection Voltage 1.2-4.35V Adjustable
Over Charge Release Voltage 1.2-4.35V Adjustable
Over Current Detect Delay 2-120S Adjustable
Over Discharge Protection Voltage 1.2-4.35V Adjustable
Over Discharge Release Voltage 1.2-4.35V Adjustable
Quantity of Temperature Detection 4
Temp Protection Yes
Short Circuit Protection Yes
Coulomb Counter Yes
Bluetooth Function Support for Android/iOS/Harmony
Parallel charging current limiting 10A
Address dial switch 4
DRY Contact 2

Additional Specifications:

  • High-concerned chemical: None
  • Balance Function: Active Balanced BMS
  • Handware or Smart: SMART BMS
  • Charge and Discharge Port: Common Port BMS
  • Type: LI-ION Battery BMS
  • Origin: Mainland China
  • Function: Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
  • 4.3 inches LCD: LCD display can be added
  • Suit for battery: Li-ion / lifepo4 / LTO
  • Version: V15
  • Battery Strings: 8S ~16S
  • Temperature protection: Yes
  • Heating Function: Yes
  • Adapting system: Android or iOS Harmony
  • Operation, alarm, and power indication: Support
  • Support Parallel Connection: Yes
  • Certifications: CE, FCC, RoHS

8. User Tips

  • Verify Cell Count: Always double-check your battery cell count (S-number) matches the BMS configuration to prevent damage.
  • Secure Connections: Ensure all balance wires and main power cables are securely fastened to avoid intermittent connections or arcing.
  • Monitor Initial Cycles: During the first few charge/discharge cycles, closely monitor cell voltages via the app or display to confirm proper balancing operation.
  • Parameter Adjustment: If adjusting protection parameters, do so cautiously and understand the implications for your specific battery chemistry and application.
  • Environmental Protection: Protect the BMS from moisture and extreme temperatures to ensure its longevity.

9. Warranty and Support

JIKONG Technology Co., Ltd. is committed to providing high-quality products and technical support. For any inquiries, technical assistance, or support needs regarding your JIKONG Smart BMS, please contact the manufacturer directly through their official channels. Keep your purchase records handy when seeking support.

Image of Chengdu Jikong Technology Co., Ltd. building and company information
Figure 12: Information about Chengdu Jikong Technology Co., Ltd., the manufacturer of the BMS.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.