ANDELI CUT-50D

Contents

ANDELI CUT-50D High-Frequency Plasma Cutting Machine User Manual

Model: CUT-50D | Brand: ANDELI

1. Introduction

The ANDELI CUT-50D is a digital high-frequency start professional plasma cutting machine designed for efficient and precise metal cutting. It incorporates advanced IGBT inverter technology for stable and powerful current output, making it suitable for cutting various metals including stainless steel, carbon steel, aluminum, and copper alloys.

This machine offers a clean cut thickness of up to 15mm (0.59") and a maximum cutting thickness of 20mm (0.78"). It features a non-touch pilot arc for extended consumable life and includes a built-in air pressure regulator and an oil-water separator to enhance performance and durability.

2. Safety Precautions

Please read and understand all safety instructions before operating the ANDELI CUT-50D plasma cutting machine. Failure to follow these instructions may result in serious injury or property damage.

  • High-Frequency Discharge: High-frequency discharge occurs during operation. It is recommended to use the machine away from sensitive electrical appliances to prevent interference.
  • Electrical Safety: Ensure the machine is properly grounded. Do not operate in wet conditions. Always disconnect power before performing maintenance or adjustments.
  • Personal Protective Equipment (PPE): Always wear appropriate PPE, including welding helmet with proper shade, flame-resistant clothing, gloves, and safety shoes.
  • Ventilation: Ensure adequate ventilation to disperse fumes and gases produced during cutting.
  • Fire Hazards: Keep flammable materials away from the cutting area. Have a fire extinguisher readily available.

3. Component Identification

Familiarize yourself with the main components of your plasma cutting machine:

Panel Introduction diagram of the ANDELI CUT-50D plasma cutter with numbered components.
Figure 3.1: Front and Rear Panel Introduction
  1. Gas-Electric Connector: Connects the plasma torch.
  2. Pilot Arc Indicator: Illuminates when the pilot arc is active.
  3. Torch Switch: Controls the plasma torch operation.
  4. Earth Clamp Connector: Connects the earth clamp to the workpiece.
  5. Air Compressor Filter: Filters air supply, includes an oil-water separator.
  6. Power Cable: Main power input cable.
  7. Power Switch: Turns the machine ON/OFF.
  8. Rating Plate: Contains model, serial number, and electrical specifications.
  9. Cooling Fan: Provides air cooling for internal components.
  10. Air Pressure Adjustment Button: Used to set the desired air pressure.
LED Digital Screen Display showing PSI, MPA, Amps, and Volts readings.
Figure 3.2: LED Digital Screen Display

4. Setup Instructions

Follow these steps to set up your ANDELI CUT-50D plasma cutter:

  1. Placement: Place the machine on a stable, level surface with adequate ventilation. Ensure sufficient clearance around the cooling fan.
  2. Power Connection: The machine supports 110/220V dual input voltage and comes with a 220V power plug. Connect the power cable to a suitable power outlet that complies with electrical standards.
  3. Air Supply Connection: Connect your external air compressor to the air inlet on the machine. The machine has a built-in air pressure regulator and oil-water separator, so no additional installation is required for these components.
  4. Torch Connection: Connect the plasma torch to the Gas-Electric Connector (1) on the front panel.
  5. Earth Clamp Connection: Connect the earth clamp to the Earth Clamp Connector (4) and securely attach the clamp to the workpiece or a clean, bare metal part of the cutting table.
Quick Start features showing preset air pressure and 220V power plug.
Figure 4.1: Quick Start Features

5. Operating Instructions

Once the machine is set up, follow these steps for operation:

  1. Power On: Turn on the Power Switch (7) on the rear panel. The LED display (Figure 3.2) will light up.
  2. Adjust Air Pressure: Use the Air Pressure Adjustment Button (10) to set the air pressure within the recommended range of 45-60 PSI. The pressure can be visualized on the LED display.
  3. Select Cutting Current: Adjust the cutting current (Amps) using the control knob on the front panel. The recommended cutting current for 16mm thickness at 60PSI is 50A.
  4. Non-Touch Pilot Arc: The CUT-50D features a non-touch pilot arc, which helps save on cutting nozzles/tips and provides a cleaner start.
  5. Cutting Process: Position the plasma torch over the workpiece. Press the Torch Switch (3) to initiate the pilot arc and begin cutting. Move the torch steadily along the desired cutting path.
  6. 2T/4T Function: The machine includes a 2T/4T function.
    • 2T (Two-Touch): Press and hold the torch switch to cut; release to stop.
    • 4T (Four-Touch): Press and release the torch switch to start cutting; press and release again to stop. This mode is useful for longer cuts to reduce hand fatigue.
  7. Post-flow Time: The machine has an adjustable post-flow time of 2-10 seconds, which helps cool the torch and prolong consumable life.
Non-Touch Pilot Arc in action, showing cutting thickness of 16mm at 60PSI.
Figure 5.1: Non-Touch Pilot Arc Feature
Excellent cutting performance on various metal thicknesses, up to 3/4 inch.
Figure 5.2: Cutting Performance on Different Thicknesses
Examples of materials that can be cut: Carbon Steel, Aluminium, Stainless-Steel.
Figure 5.3: Compatible Cutting Materials

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your plasma cutting machine.

  • Air Compressor Filter: Regularly check and clean or replace the Air Compressor Filter (5) and its oil-water separator. This prevents moisture and contaminants from entering the torch and affecting cut quality.
  • Consumables: Inspect the plasma torch consumables (nozzle, electrode, shield cup) regularly for wear and tear. Replace them as needed to maintain optimal cutting performance.
  • Cleaning: Keep the machine clean and free from dust and debris. Use compressed air to blow out any accumulated dust from the cooling fan and internal components.
  • Cable Inspection: Periodically inspect all cables (power, torch, earth clamp) for any signs of damage, fraying, or loose connections.

7. Troubleshooting

The ANDELI CUT-50D features an LED display that indicates various operational statuses and potential faults. Over-temperature and over-current faults are automatically detected.

Large LED Display showing indicators for Power On, Under-voltage, Overcurrent, Overheat, and ECO mode.
Figure 7.1: LED Display Indicators
LED Display Indicators and Troubleshooting
Indicator IconDescriptionPossible Cause / Action
AC (Power On)Power is connected. Switch is in the ON position.Normal operation. If not lit, check power cable and switch.
V (Under-voltage Protection)Input voltage is lower than 190V (when using 220V input).Check power supply voltage. Ensure it meets the machine's requirements.
Lightning (Overcurrent Protection)Indicates potential damage to original components inside the machine due to excessive current.Turn off the machine immediately. Consult a qualified technician.
Thermometer (Overheat Protection)The machine is over-heated.Allow the machine to cool down. Ensure proper ventilation and that the cooling fan is not obstructed. Reduce duty cycle if continuously overheating.
ECO (Continuous Cutting in Energy-saving Mode)Machine is operating in energy-saving mode for continuous cutting.Normal operation.

8. Specifications

Detailed technical specifications for the ANDELI CUT-50D plasma cutting machine:

Table showing detailed parameters and CE rating plate for the CUT-50D plasma cutter.
Figure 8.1: Product Parameters and CE Rating
ParameterValue
ModelCUT-50D
Rated Input Power SupplySingle-phase AC220V 50Hz
Rated Input Capacity (KVA)6.5
Power Factor0.7
Rated Output (AV)50/100
Rated Duty Cycle (%)60
No-load Voltage (V)300
Output Current Range (A)50
Arc Ignition ModeHF (High Frequency)
Post-flow Time (S)2-10
Gas Pressure Range (Psi)45-60
Insulation GradeF
Cooling ModeAir Cooling
Enclosure Ingress ProtectionIP21S
Efficiency85%
Clean Cutting Thickness12mm (0.47")
Max Cutting Thickness16mm (0.63") - 20mm (0.78")
Dimension (L x W x H)453 x 165 x 275mm (17.8 x 6.5 x 10.8 inches)
Net Weight7.5KG (16.5 lbs)
For Material TypeSteel, Stainless Steel, Copper Alloys, Cast Iron, Mild Steel
DIY SuppliesElectrical

9. User Tips

  • Optimal Air Pressure: Maintaining the correct air pressure (45-60 PSI) is crucial for clean cuts and extending consumable life. Too low pressure can result in a poor cut, while too high can waste air and wear out consumables faster.
  • Consumable Life: The non-touch pilot arc feature helps prolong the life of your cutting nozzles and tips. However, regularly checking and replacing worn consumables will ensure consistent cut quality.
  • Practice Cuts: Before making critical cuts, perform practice cuts on scrap material to fine-tune your settings (current, air pressure, travel speed) for the specific material thickness.

10. Warranty and Support

The ANDELI CUT-50D plasma cutting machine comes with a 1-year warranty. During this period, free parts replacements are available for manufacturing defects or malfunctions under normal use.

For technical support, warranty claims, or any inquiries regarding your product, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.