Dooya Rolling Code Remote Controller User Manual

1. Introduction

This manual provides instructions for the BULIAN Dooya Rolling Code RF433 Remote Controllers, including models DC2700AM (1-channel), DC2760AM (2-channel), and DC2702D (15-channel). These remote controllers are designed to operate Dooya electric RF (Radio Frequency) tubular motors and curtain motors that utilize rolling code technology at 433MHz. Please read this manual carefully before use to ensure proper operation and to avoid damage.

2. Important Safety Information

• Keep the remote control away from water and high humidity.
• Do not expose the remote to extreme temperatures.
• Do not attempt to disassemble or repair the remote control yourself. Refer to qualified personnel for service.
• Keep batteries out of reach of children.
• Ensure correct battery polarity when installing.

3. Product Overview

The Dooya Rolling Code Remote Controllers are available in single, dual, and multi-channel versions to suit various control needs for Dooya RF433 tubular and curtain motors.

3.1 Models and Features

• DC2700AM (1-Channel): Single-channel remote for controlling one motor or a group of motors simultaneously.
• DC2760AM (2-Channel): Dual-channel remote for controlling two individual motors or two groups of motors.
• DC2702D (15-Channel): Multi-channel remote with an LCD display, capable of controlling up to fifteen individual motors or groups of motors.

Important Compatibility Note:

These remote controllers are specifically designed for and only work with Dooya Rolling Code RF motors operating at 433MHz. They are NOT compatible with Dooya fixed code motors or motors from other brands unless explicitly stated by the manufacturer.

4. Specifications

5. Setup

5.1 Battery Installation

The remote controllers require batteries for operation. Batteries are typically not included with the purchase.

1. Locate the battery compartment cover on the back of the remote control.
2. Slide or gently pry open the cover.
3. Insert two AAA batteries, ensuring correct polarity (+ and - terminals match the markings inside the compartment).
4. Replace the battery compartment cover until it clicks securely into place.

5.2 Pairing with Motor (Refer to Motor Manual)

The pairing process for the remote control with your Dooya rolling code RF motor typically involves a specific sequence of button presses on both the motor and the remote. This procedure can vary slightly between different Dooya motor models. Please refer to the instruction manual provided with your Dooya electric RF433 tubular or curtain motor for detailed pairing instructions.

6. Operating Instructions

Once paired, the remote control allows for easy operation of your Dooya motor.

6.1 Button Functions

• 开 (Kāi) / Open: Initiates the motor to open the curtain/blind.
• 停 (Tíng) / Stop: Stops the motor's current action.
• 关 (Guān) / Close: Initiates the motor to close the curtain/blind.
• 通道- (Tōngdào-) / Channel -: (For multi-channel remotes like DC2702D) Decreases the selected channel number.
• 通道+ (Tōngdào+) / Channel +: (For multi-channel remotes like DC2702D) Increases the selected channel number.

6.2 Single Channel Operation (DC2700AM)

For the 1-channel remote, simply press the desired action button:

• Press 开 (Open) to open.
• Press 关 (Close) to close.
• Press 停 (Stop) to stop.

6.3 Multi-Channel Operation (DC2760AM, DC2702D)

For multi-channel remotes, you must first select the desired channel.

1. Use the 通道- (Channel -) or 通道+ (Channel +) buttons to select the channel corresponding to the motor you wish to control. The DC2702D model features an LCD screen to display the current channel.
2. Once the channel is selected, press the 开 (Open), 关 (Close), or 停 (Stop) button to control the motor on that specific channel.

7. Maintenance

7.1 Cleaning

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing or buttons.

7.2 Battery Replacement

If the remote control's range decreases or it becomes unresponsive, it may be time to replace the batteries. Follow the battery installation steps in Section 5.1.

8. Troubleshooting

• Remote not responding:
  • Check if the batteries are correctly installed and not depleted. Replace if necessary.
  • Ensure the remote is within the operating range of the motor.
  • Verify that the remote is properly paired with the motor (refer to your motor's manual).
• Motor not responding to commands:
  • Confirm that the motor is powered on.
  • For multi-channel remotes, ensure the correct channel is selected.
  • Double-check compatibility: This remote only works with Dooya Rolling Code RF433 motors. It will NOT work with fixed code motors or motors from other brands.

9. User Tips

• Keep your remote control in a consistent location to avoid misplacing it.
• Consider labeling your multi-channel remote with the corresponding motor/curtain it controls for easier identification.
• If you have multiple Dooya rolling code motors, ensure each is paired to a distinct channel on your multi-channel remote for individual control.

10. Warranty and Support

For warranty information and technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.