1. Introduction
The SHIMANO CALCUTTA CONQUEST CQ series represents a pinnacle in fishing reel engineering, designed for both freshwater and saltwater environments. These reels feature a highly rigid metal HAGANE body, advanced INFINITYDRIVE and MICROMODULE GEAR systems for smooth operation, and the SVS centrifugal brake system for precise casting control. The S COMPACT BODY design enhances maneuverability, while SA-RB and A-RB bearings provide superior corrosion resistance. This manual provides essential information for the proper setup, operation, and maintenance of your CALCUTTA CONQUEST CQ reel.

2. Setup
- Attaching the Reel to the Rod: Securely fasten the reel to your fishing rod's reel seat. Ensure it is snug to prevent movement during casting and retrieving.
- Spooling the Line: Carefully spool your fishing line onto the MGL Spool III. Ensure even line lay to maximize casting performance and prevent tangles. The low-inertia MGL spool is designed for lower trajectory casting.
- Adjusting the SVS Brake System: The SVS centrifugal brake system allows for instant adjustment of braking force. Locate the outer circular dial on the side plate (Figure 2). Turn the dial to increase or decrease braking force based on your lure weight, casting style, and environmental conditions. This system helps prevent line tangles and enhances casting distance.



3. Operating Instructions
- Casting: Engage the free spool by pressing the thumb bar. Adjust the SVS brake system as needed for optimal casting distance and control. Aim for a smooth, controlled cast to prevent backlash. The low center of gravity design aids in improved wheel control during casting.
- Retrieving: Turn the handle to engage the reel. The INFINITYDRIVE technology minimizes rotational resistance, providing a smooth and powerful retrieve. The MICROMODULE GEAR system ensures super-smooth reeling performance with reduced vibration.
- Drag Adjustment: Use the star drag to set the appropriate tension for your fishing conditions and target species. Ensure the drag is set correctly before fishing to prevent line breakage or damage to the reel.
- Line Guide: The throwing line guide ensures smooth line out and helps prevent damage to the line during casting and retrieving.



4. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your SHIMANO CALCUTTA CONQUEST CQ reel.
- Cleaning After Use: After each use, especially in saltwater, rinse the reel with fresh water to remove salt and debris. The SA-RB and A-RB bearings feature high-performance rust-proof treatment, making them suitable for saltwater use, but rinsing is still recommended.
- Drying: Allow the reel to air dry completely before storage. Do not expose it to direct sunlight for prolonged periods.
- Lubrication: Periodically apply a small amount of high-quality reel oil to moving parts and grease to gears as recommended by SHIMANO. Refer to the reel's exploded diagram (if available) for specific lubrication points.
- Accessing Internal Components: To access the SVS brake system or other internal components for cleaning or adjustment, locate the Front Cover Open Button on the back of the reel and flip it to the right (Figure 8).

5. Troubleshooting
- Backlash during casting: Adjust the SVS brake system by turning the outer circular dial to increase braking force. Ensure your spool tension is also correctly set.
- Rough reeling: Check for debris in the gears or bearings. Clean and lubricate the reel as described in the Maintenance section. If the issue persists, professional servicing may be required.
- Line tangles: Ensure the line is spooled evenly and not overfilled. Adjust the SVS brake system to prevent the line cup from turning back too fast during casting.
- Reduced casting distance: Check your SVS brake settings; too much braking force can reduce distance. Ensure your line is clean and free of nicks or damage.
6. Specifications
The SHIMANO CALCUTTA CONQUEST CQ series offers various models with specific characteristics:
| Model | Gear Ratio | Drag Max (KG) | Weight (G) | Wire Cup Radius (mm) | Standardized Capacity (LB-M) | Take-up Length (CM) | Handle Length (CM) | Bearings |
|---|---|---|---|---|---|---|---|---|
| 100 (Right Hand) | 5.6:1 | 4.5 | 220 | 33/19 | 12-100, 14-90, 16-80, 20-65 | 59 | 42 | 13+1 |
| 101 (Left Hand) | 5.6:1 | 4.5 | 220 | 33/19 | 12-100, 14-90, 16-80, 20-65 | 59 | 42 | 13+1 |
| 100HG (Right Hand) | 7.4:1 | 4.0 | 220 | 33/19 | 12-100, 14-90, 16-80, 20-65 | 77 | 42 | 13+1 |
| 101HG (Left Hand) | 7.4:1 | 4.0 | 220 | 33/19 | 12-100, 14-90, 16-80, 20-65 | 77 | 42 | 13+1 |
| 200 (Right Hand) | 4.8:1 | 6.0 | 235 | 38/21 | 12-165, 14-145, 16-120, 20-100 | 57 | 42 | 13+1 |
| 201 (Left Hand) | 4.8:1 | 6.0 | 235 | 38/21 | 12-165, 14-145, 16-120, 20-100 | 57 | 42 | 13+1 |
| 200HG (Right Hand) | 6.5:1 | 5.0 | 240 | 38/21 | 12-165, 14-145, 16-120, 20-100 | 78 | 42 | 13+1 |
| 201HG (Left Hand) | 6.5:1 | 5.0 | 240 | 38/21 | 12-165, 14-145, 16-120, 20-100 | 78 | 42 | 13+1 |
Note: 'Right Hand' and 'Left Hand' refer to the retrieve hand. 'HG' denotes High Gear models.
7. User Tips
- Brake Adjustment for Different Lures: Experiment with the SVS brake settings when switching between different lure weights. Heavier lures generally require less braking, while lighter lures may need more to prevent backlash.
- Smooth Casting Technique: Focus on a smooth, controlled casting motion rather than brute force. This will maximize casting distance and minimize the chance of tangles, especially with the MGL Spool III.
- Regular Inspection: Periodically check the line guide, handle, and drag system for any signs of wear or damage. Early detection can prevent bigger issues.
- Saltwater Care: Even with rust-proof bearings, always rinse your reel thoroughly with fresh water after saltwater use. Pay attention to crevices where salt can accumulate.
8. Warranty and Support
For warranty information, service, or technical support, please contact SHIMANO customer service or the authorized dealer from whom you purchased the reel. Keep your proof of purchase for any warranty claims. Ensure you register your product if required by SHIMANO to activate your warranty.