ETAxopowo 3-inch 2-way Passive Speaker

Contents

ETAxopowo 3-inch 2-Way Passive Speaker Instruction Manual

Model: 3-inch 2-way Passive Speaker

1. Introduction

Thank you for choosing the ETAxopowo 3-inch 2-way passive speaker. This speaker unit is designed for DIY enthusiasts and is ideal for retrofitting TV built-in speakers or creating custom desktop audio systems. Featuring a 3-inch mid-low frequency driver combined with a high-frequency component, it delivers clear highs and mellow vocals, making it a versatile choice for various audio projects.

Overview of two 3-inch 2-way passive speakers

Figure 1: Overview of two ETAxopowo 3-inch 2-way passive speakers.

2. Specifications

FeatureDetail
Item TypeSpeaker Unit
Brand NameETAxopowo
Speaker Type3-inch 2-way Passive Speaker
Mid-Low Frequency Driver Diameter77mm (3 inches)
High Frequency ComponentIntegrated (directional design)
Impedance6 Ohm
Rated Power10W
Recommended Amplifier Power30-50W
Dimensions (L x W x T)20cm (7.87") x 9.4cm (3.7") x 2cm (0.78") (including installation holes and horn magnets)
OriginMainland China
Diagram showing the dimensions of the speaker unit

Figure 2: Speaker dimensions for installation planning.

3. Package Contents

Your package should contain the following items:

  • Two (2) ETAxopowo 3-inch 2-way Passive Speaker Units (one pair for left and right channels)

4. Setup and Installation

These are passive speakers and require an external amplifier to function. Ensure your amplifier meets the recommended power output (30-50W) and impedance (6 Ohm) for optimal performance.

4.1. Tools Required

  • Screwdriver (appropriate for speaker mounting screws)
  • Wire strippers
  • Speaker wire (appropriate gauge for your amplifier and cable length)
  • Amplifier (30-50W, 6 Ohm compatible)

4.2. Installation Steps

  1. Prepare Mounting Location: Identify the desired location for your speakers (e.g., TV enclosure, custom desktop speaker cabinet). Ensure the space accommodates the speaker dimensions (20cm L x 9.4cm W x 2cm T).
  2. Secure Speakers: Mount the speakers securely using appropriate screws through the integrated installation holes. Ensure they are firmly in place to prevent vibrations.
  3. Connect Speaker Wires: Each speaker unit comes with pre-attached wires. Carefully strip the ends of your speaker wire and connect them to the corresponding terminals on the speaker unit. Pay attention to polarity (positive to positive, negative to negative).
  4. Connect to Amplifier: Connect the other end of the speaker wires to the speaker output terminals on your amplifier. Again, ensure correct polarity for both left and right channels.
  5. Power On: Once all connections are secure, power on your amplifier and audio source.
View of two speakers, one with the back panel slightly open, showing internal components and wiring

Figure 3: Internal view of the speaker showing wiring connections.

Another view of the speakers with one partially disassembled, showing the internal structure

Figure 4: Detailed view of speaker components for reference during installation.

5. Operating Instructions

Once properly installed and connected to an amplifier, your ETAxopowo passive speakers are ready for use. Simply play audio through your connected amplifier and adjust the volume and tone controls as desired.

Video 1: Demonstration of the speaker's physical movement and sound output.

6. Maintenance

To ensure the longevity and optimal performance of your speakers, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to gently wipe the speaker surfaces. Avoid using harsh chemicals or abrasive materials.
  • Environment: Keep the speakers in a dry environment, away from direct sunlight, extreme temperatures, and excessive moisture.
  • Protection: Avoid physical impact or pressure on the speaker cones, as this can cause damage.
Close-up of the speaker's mid-low frequency cone

Figure 5: Close-up of the speaker cone, handle with care during cleaning.

Side view of the speaker, highlighting the high-frequency component (tweeter)

Figure 6: Side view showing the high-frequency component.

7. Troubleshooting

If you encounter issues with your speakers, please refer to the following common problems and solutions:

  • No Sound:
    • Ensure the amplifier is powered on and the volume is turned up.
    • Check all speaker wire connections for proper seating and polarity.
    • Verify the audio source is working correctly and connected to the amplifier.
  • Distorted Sound:
    • Reduce the volume on your amplifier and audio source.
    • Check for loose connections or damaged speaker wires.
    • Ensure your amplifier's power output is not exceeding the speaker's rated power for extended periods.
  • One Speaker Not Working:
    • Check the speaker wire connections for that specific speaker at both the speaker unit and the amplifier.
    • Swap the speaker with the working one (if applicable) to determine if the issue is with the speaker unit or the amplifier channel.

8. User Tips

While no specific user reviews or Q&A were provided, here are some general tips for optimizing your speaker experience:

  • Amplifier Matching: Using an amplifier within the recommended 30-50W range will provide the best balance of power and sound quality for these 10W rated speakers.
  • Enclosure Design: For DIY projects, the quality and design of your speaker enclosure significantly impact sound performance. Consider acoustic principles for optimal bass response and sound dispersion.
  • Polarity Check: Always double-check speaker wire polarity (positive to positive, negative to negative) to ensure proper phase and sound imaging. Incorrect polarity can lead to weak bass and an unnatural soundstage.

9. Warranty and Support

For any warranty claims or technical support, please contact the seller directly through the platform where you purchased the product. Provide your order number and a detailed description of the issue to facilitate a quicker resolution.

© 2023 ETAxopowo. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.