1. Introduction
Thank you for choosing the Junsun Car Navigation Audio and Video Product. This manual provides systematic instructions on the basic functions, usage skills, and precautions for your car radio. Please read carefully before use to ensure a safe and optimal experience.
This manual is for reference only. The manufacturer reserves the right to upgrade the product hardware, software, structure, and accessories without prior notice. Minor differences between the manual and the actual product due to technical updates shall not be regarded as product quality defects. The actual delivered product shall prevail.
2. Safety & Warnings
- Do not operate the device while driving.
- Ensure the device is installed in a position that does not obstruct the driver's view to ensure safe driving.
3. Setup & Installation
3.1. Package Contents
Before installation, please verify that all components are present:
- BENZ16 Frame
- Junsun Car Radio Unit
- Frame (X9 Plus)
- Power Cable
- 4PIN/6PIN USB Cables
- Video Input Cable
- GPS Module
- Canbus
- 4G Module
- 4G SIM Cable
- Instruction Manual (this document)

3.2. Physical Installation
The Junsun radio's power cable is pin-to-pin, allowing direct connection to the car's power interface for easy installation.

3.2.1. Installation Method for X9 Plus
The machine has 4 fixing holes and comes with 3 groups of holes in the frame for flexible mounting.

3.3. Wiring Diagram
Refer to the following diagrams for proper cable connections.

3.4. Rear Camera Connection
To connect the rear camera, follow these steps:
- Red cable ① is connected to the backup light "+".
- Black cable ② is connected to the backup light "-".
- The reversing detection cable ④ (Brown color) is connected to the red cable ③ which extends from the video input cable.
- Cable ⑤ does not need to be connected.

3.5. Map Installation
If your car radio does not have pre-installed maps, you can copy and install them:
- Copy the map package and APK file to an SD card or USB flash drive.
- Click the application icon (usually a grid of squares) on the main interface to enter the application interface.
- Open the 'File Manager' application. The left directory will show the USB disk path.
- Enter the U disk, check the map data package and APK.
- Click [Copy] in the lower left corner.
- Switch to the "Local" directory.
- Click [Paste] in the lower left corner. The copy is estimated to take about 10 minutes.
- After the copy is complete, click on the map APK to install it.
4. Operating Instructions
4.1. Boot and Shutdown
- Boot: Plug in the car key, turn on the ACC power. The device will automatically boot and display the boot LOGO animation.
- Shutdown: After removing the car key and turning off the ACC power, the device will automatically shut down.
- Power Button: Long press to power on/off, short press to sleep screen/mute.
4.2. Main Interface and Application Interface
- The device features a multi-page screen. Slide left or right to switch between pages.
- Click the application icon (grid of squares) on the main interface to access the application interface.
4.3. Status Bar and Drop-Down Menu
The car status bar and drop-down menu provide quick access to various functions and settings.
4.4. Wallpaper Replacement
There are two ways to set the wallpaper:
- Navigate to Settings > Car Settings > Display > Wallpaper. Choose the wallpaper source according to your personal preferences.
- Select from Live Wallpapers or static images.
4.5. Navigation Function
Click the navigation icon on the main interface or select the navigation function from the application interface to enter the map interface.
4.6. Radio Function
Click the radio function on the main interface or application interface to enter the radio interface.
- Search Station: Find available radio stations.
- DSP Settings: Adjust digital sound processing.
- Long-Distance Switching: Optimize reception for distant stations.
- Voice: Enable voice commands.
- Low/High Frequency Sweep/Stepping: Fine-tune station selection.
- Long press to save a station.
4.7. Bluetooth Function
Click the Bluetooth function to enter the Bluetooth interface.
4.7.1. Paired Devices
- When not paired, you can only enter settings and search for devices.
- In the pairing interface, click 'Q' to find nearby devices. Select the device to be paired. Your phone will prompt for a PIN code. A checkmark icon indicates successful connection.
4.7.2. Bluetooth Music
Click the music icon to enter the music player interface. After connecting to your phone, you can use Play, Pause, Previous, and Next functions.
Note: For some mobile phones, the music player app needs to be open on the phone first to use Bluetooth music.
4.7.3. Bluetooth Address Book
- On the Bluetooth interface, click the address book icon to enter the address book.
- Download Step: Select Phone/SIM, then click the [Download] button to confirm the address book synchronization request.
- Find a contact: After synchronizing, click the corresponding phone/SIM button. A search box will appear.
4.8. Music Function
Click the music icon button to enter the music player interface. Select the playback path (Playlist, SD Card, U Disk, Local) at the top of the interface.
4.9. Video Function
Click the video function to enter the video playback interface. Supported formats include MP4, AVI, WMV, MOV, MKV, MPEG, RMVB, etc.
4.10. Equalizer (EQ)
4.10.1. Accessing EQ Settings
There are two ways to enter the EQ interface:
- From the application interface, click the EQ icon to enter the equalizer setting.
- On the radio and music interfaces, click the EQ icon to enter the equalizer setting interface.
4.10.2. EQ and Sound Field Settings
- Equalizer Settings: Choose from 8 sound effects.
- Sound Field Setting: Adjust bass and loudness, and volume for front left, front right, rear left, and rear right speakers.

4.11. AUX In Function
Enter the AUX IN interface.
- If the video input signal is not connected, the AUX IN interface will display "no video signal."
- When an access signal is present, the AUX interface displays the video screen.
- The "return to previous interface" and "return to main interface" options are hidden after a timeout.
4.12. Third-Party Application - ZLINK5
After successful activation, the lower right corner of the ZLINK5 connection interface will show a display mark corresponding to the activation package. This indicates support for full-featured wired CarPlay + wired Android Auto. If wired CarPlay + Auto is activated, only the last two icons will be displayed on this interface. If the interface is not displayed after activation, restart the car.
4.13. WiFi Settings
There are two ways to manage WiFi:
- Drop-down menu WLAN function: Short press to toggle on/off. Long press to enter the WLAN settings interface.
- Settings: Navigate to Settings > Network and Internet > WLAN.
4.14. Sound Settings
Sound settings include four main functions:
- Reversing Mute: When checked, the car has no sound output during reverse. When unchecked, sound output is enabled.
- Navigation Channel:
- Front left and front right: When navigating, if the system is not using a sound source like radio/AUX/DVD/TV/external Bluetooth, navigation audio will only output from the front left and right speakers, while rear speakers maintain the current source sound.
- All: All four channels will have navigation sounds.
- Navigation Volume: Adjust the navigation volume using the progress bar.
- Background Music: Adjust the current source sound size. Reduce current source sound when navigating, or set to 0 to insert video during navigation (if the current source has no sound output during navigation broadcast, the source sound is raised).
- Device Ringtone: Music played when the car receives a call.
4.15. Date and Time
The device automatically calibrates the current time. You can manually set the date, time, time zone, and format using the time and time zone provided by the network. Navigate to Settings > System > Date and time to adjust as needed.
4.16. Switching Input Method
Navigate to Settings > System > Language and Input Method > Virtual Keyboard > Manage Keyboard. Enable the desired input methods and disable others.
4.17. Steering Wheel Learning
This feature allows you to map your car's steering wheel buttons to control the radio functions.
- Go to Car settings > General > SWC type > Learning type.
- Click 'Enter SWC setting interface' to begin.
- Click the button you want to learn on the screen.
- Press the corresponding button on the vehicle's steering wheel. If successful, the buttons on the square control interface will change color.
- Repeat steps 3 and 4 until all buttons on the steering wheel are set.
- Click [End] to complete the controller setup.
Note: The square control interface is only available for models without CAN protocol.
4.18. Method for Models with CAN Protocol
For models with CAN protocol, follow these steps:
- Go to Car Settings > Factory Password (000000).
- Navigate to CarType Setting.
- Choose the corresponding vehicle information.
- Click OK to save.
4.19. Split Screen
Click the split screen icon to bring up multiple pages. Drag the desired page to the left or right to split the screen.

4.20. Button Light Settings
Adjust the illumination color of the buttons:
- Model 1 (Open LED Animation): Automatic color change.
- Model 2 (Close LED Animation): Click to switch colors manually.
5. User Tips
- Image and Audio Quality: Users report great image quality and improved audio. Ensure proper EQ settings for optimal sound.
- Installation Fit: The unit fits perfectly for Smart 453 models.
- Initial Setup: Some adjustments may be needed during initial setup, but once configured, the system performs well.
- PX9 Plus Version: The PX9 Plus version is highly recommended for its performance.
- 360-Degree Camera: The 11.5" X9 Plus model may support a 360-degree camera function. Check product specifications or consult support for confirmation.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
- Software Updates: Junsun offers free updates for firmware, software, UI, and navigation maps. Regularly check for and install updates to enhance functionality and performance.
- Cooling Fan: The radio is equipped with a powerful cooling fan to prevent overheating and ensure stable long-term operation. Ensure the fan vents are not obstructed.
7. Troubleshooting
- No Video Signal (AUX IN): Ensure the video input signal is properly connected.
- ZLINK5 Icons Not Displaying: If the interface is not displayed after activation, restart the car.
- Bluetooth Music Not Playing: For some mobile phones, the music player app needs to be open on the phone first.
- Time Not Updating: The device needs to acquire a satellite signal successfully for the first time to update the time automatically.
- System Lag/Slow Performance: The system and preinstalled apps consume memory. If installing large maps (e.g., Russia map ~3GB, Europe map ~7GB), ensure sufficient RAM is available. The UIS7870 chip is designed for high performance.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Junsun |
| Origin | Mainland China |
| For Vehicle Brands/Model | Mercedes-Benz Smart 453 (2014-2020) |
| Operating System | Android 14 |
| CPU | Octa-core ARM® (1xCortex®-A76@2.7GHz + 3xA76@2.3GHz + 4xA55@2.1GHz) | 6nm EUV |
| Chipset | 7870 (UIS7870) |
| Processor Speed | 2.1 Ghz to 2.7 Ghz |
| Processor Type | TDA 7851 |
| RAM | 6G / 8G / 12G (depending on SKU) |
| ROM | 128G / 256G (depending on SKU) |
| Display Size | 11.5 inch / 9.5 inch (depending on SKU) |
| Resolution | 2000*1200P |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| Din | Double Din |
| Out Power | 4*30W |
| Voltage | 12 V |
| Item Weight | 2.5kg |
| Item Size | 11.5 inch (265x170mm) / 9.5 inch (227x130mm) |
| Max External Memory | 256G |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support (Simplified Chinese, Traditional Chinese, Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Dutch, Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galician, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, Thai, Turkish, Welsh, Ukrainian, Hebrew, Greek, Basque, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesian, English, Vietnamese) |
| Material | Composite Material |
| Certification | CE, EAC, FCC, RoHS, KC, WEEE |
| Network | 4G Internet + 5G WIFI |
| Bluetooth | BT5.0 (Realtek8761BTV Chipset) |
| Wireless CarPlay/Auto | Support |
| GPS Navigation Map | Built-in offline map, free update |
| Tuner Type | AM/FM (TDA 7708 Ultra RX Chip) |
| Preset Station | Set by yourself |
| Built-in DVD Player | No |
| Built-in CD player | No |
| Special Features | Built-In Speaker/Microphone, WiFi function, Support 3G/4G Network, Support Can-Bus, Built-in GPS, MP3 players, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control |


9. Warranty & Support
9.1. Warranty Information
- Warranty: 3 years
- Shipping Worry-Free: Within 48 hours business time
- Service Worry-Free: 24H*7 service supporting
- Warranty Worry-Free: 3 Years warranty
9.2. Manufacturer Information
- Company Name: Shenzhen jinnaibo Electronic Co., Ltd
- Address: Floor 3, building L, Shasi hi tech park, Shasi Community, Shajing street, Baoan, Shenzhen, Guangdong, CN (China)
- Email: junsun888@163.com
9.3. EU Authorized Representative
- Company Name: EC REP SERVICES SL
- Address: Calle Gran Via 49,7 DCH.Apt 123, Madrid, 28013, Spain
- Email: ecrepservice@hotmail.com
- Phone: 34-682797075
