Huanyang GT-4R0G-2

Contents

Huanyang GT Series VFD 220V 5HP 4KW Vector Control Variable Frequency Drive Inverter User Manual

Model: GT-4R0G-2

Brand: Huanyang

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Huanyang GT Series Variable Frequency Drive (VFD). The GT Series VFD is a high-performance inverter designed for precise speed control of three-phase asynchronous motors, utilizing advanced vector control technology. It is suitable for various industrial and commercial applications requiring efficient and reliable motor management.

Huanyang GT Series VFD main unit with accessories

Figure 1: Huanyang GT Series VFD main unit and included accessories.

2. Package Contents

Please verify that all items are present and undamaged upon opening the package:

  • 1 x 4KW HY Inverter VFD (Model: GT-4R0G-2)
  • 1 x 2M extension cable

A comprehensive user manual will be sent via email to ensure you have all necessary information for setup and operation.

3. Important Safety Notes

Read and understand all safety instructions before installation and operation to prevent injury or damage to the equipment.

  • Power Connection: When inputting single-phase power, ensure connections are made only to the R and S terminals.
  • Braking Resistors: This specific model (GT-4R0G-2) does not support the installation of braking resistors. If this functionality is required, please consult customer service for alternative product models.
  • Motor Compatibility: The variable frequency drive is designed exclusively for driving three-phase asynchronous motors. It cannot be used as a general power source for other devices.
  • Load Considerations: If your motor operates under a heavy load, it is recommended to select a VFD with a higher horsepower rating than your motor's to ensure optimal performance and prevent overload.
  • Shutdown Procedure: To protect the VFD from potential damage, always press the red "Stop" button and then turn off the main power supply when you finish using the unit.

4. Specifications

Key technical specifications for the Huanyang GT Series VFD (Model: GT-4R0G-2):

FeatureSpecification
TypeDC/AC Inverter
ModelGT-4R0G-2
Power Rating4KW (5HP)
Input Voltage220VAC (+/-5%) (Single-phase, connect to R and S terminals)
Output Voltage3-phase 220V
Input Frequency47-63Hz
Output Frequency0-400Hz, 0-50Hz/60Hz (Configurable based on motor setup)
Rated Current16.8A (Maximum current the VFD can withstand)
Applicable Motor Horse-power≤ 3KW (4HP)
Weight2.7kg
CertificationCE
OriginMainland China

5. Setup & Installation

5.1 Wiring Instructions

Ensure all power is disconnected before attempting any wiring. Incorrect wiring can cause severe damage to the VFD, motor, or pose a safety hazard.

General Wiring Diagram (Single-Phase Input)

Wiring diagram for single-phase input to a three-phase asynchronous motor

Figure 2: General wiring for single-phase 220V input to a three-phase asynchronous motor.

  • Connect the single-phase 220V AC power input to the R and S terminals of the VFD.
  • Connect the three-phase asynchronous motor to the U, V, and W output terminals of the VFD.
  • Ensure proper grounding by connecting the Earth terminal.

Wiring for 400Hz Spindle Motor

Wiring diagram for 400Hz spindle motor with single-phase 220V input

Figure 3: Wiring for a 400Hz spindle motor with single-phase 220V input.

  • Connect single-phase 220V input to VFD terminals R and S.
  • Connect the 400Hz spindle motor to VFD output terminals U, V, W.

Wiring for Standard Three-Phase Asynchronous Motor

Wiring diagram for three-phase asynchronous motor with single-phase 220V input

Figure 4: Wiring for a standard three-phase asynchronous motor with single-phase 220V input.

  • Connect single-phase 220V input to VFD terminals R and S.
  • Connect the three-phase asynchronous motor to VFD output terminals U, V, W.

5.2 Control Circuit Terminals

Close-up of control circuit terminals on the VFD

Figure 5: Control circuit terminals for external connections.

The VFD features multiple control terminals for versatile control options, including digital and analog inputs. These terminals support optional MODBUS (RS485) extension and diversified parameter settings. Refer to the detailed email manual for specific terminal functions and wiring for advanced control.

6. Operating Instructions

6.1 Control Panel Overview

Control panel overview with labeled buttons and digital display

Figure 6: Front panel of the VFD with labeled controls.

Detailed view of the control panel buttons and their functions

Figure 7: Detailed functions of the control panel buttons.

Button/IndicatorFunction
Digital DisplayShows current operating parameters and settings.
Speed Controller (Optional)Rotary knob for adjusting speed.
Shortcut KeyQuick access to frequently used functions.
STOP/RST (Red Button)Stops motor operation and resets faults. Always press before powering off.
DATA/SETEnters menu and confirms parameter settings.
PRG/ESCEnters or exits the first-level menu.
SHIFTSwitches monitoring parameters; moves data box for editing in secondary menus.
RUN (Green Button)Starts motor operation.
UP (▲)Increases data or function codes.
DOWN (▼)Decreases data or function codes.
QUICK/JOGFunction determined by parameter P7.03 (e.g., display status switching, jog operation, forward/reverse switching, clear terminal settings, quick debugging mode).

6.2 Basic Parameter Settings

After wiring, configure the VFD parameters according to your motor type:

  • For 400Hz Spindle Motors:
    • Set parameters: p0.03=400, p0.04=400, p0.06=400, p2.02=400.
    • These settings match the basic parameters for a 400Hz spindle. No other parameters typically need adjustment for basic operation.
  • For 3-Phase 50/60Hz Motors:
    • Set parameters: p0.03=50/60, p0.04=50/60, p0.06=50/60, p2.02=50/60.
    • The default setting of the VFD is 50Hz, allowing direct connection and driving for most 50Hz motors without further parameter changes. Adjust for 60Hz as needed.

External Potentiometer Control: To enable external potentiometer control, connect the potentiometer to the "COM" and "S1" terminals, then set parameter P0.01=1.

7. Advanced Features

7.1 Internal Components & Motherboard

Internal components of the VFD, highlighting MOSFET, bridge rectifier, power module, DSP chip, and current sensor

Figure 8: Key internal components of the VFD.

Image showing the advanced motherboard components

Figure 9: Advanced motherboard features.

The VFD incorporates an advanced motherboard with several sophisticated features:

  • PID Control: Utilizes advanced calculus PID closed-loop arithmetic for quick response and high suitability in various applications.
  • Easy PLC Function: Capable of realizing 16 segments of speed and inverter control functions.
  • RS485 Communication: Features an RS485 communication port, adopting the standard international MODBUS main circuit control protocol.
  • Anti-Jamming Capability: Designed with extremely strong anti-jamming capabilities for reliable operation in noisy environments.
  • Low Output Rating Torque: Provides 0.5Hz-150% low output rating torque and excellent low-speed running ability.
  • Adjustable Carrier Frequency: Carrier frequency is adjustable up to 16KHz, ensuring a completely soundless working environment.
  • Broad Voltage Working Area: Operates normally within a broad voltage range of 304V-456V.
  • Auto Voltage Regulation (AVR): AVR technique ensures stable inverter load capability.
  • Torque Compensation: Dead-time compensation and auto torque slip compensation functions enable 180% high torque output at a low frequency of 0.25Hz.

The VFD also supports Mach3 function and RS-485 communication. For more detailed information and a video demonstrating basic functions, please contact the seller.

8. Maintenance

Proper maintenance ensures the longevity and optimal performance of your VFD.

  • Cooling System: The VFD is equipped with a DC cooling fan and an aluminum base. These components are crucial for heat dissipation. Regularly inspect the fan for dust accumulation and ensure it operates freely. Clean any dust or debris from the fan and heat sink to maintain efficient cooling.
  • Environmental Conditions: Ensure the VFD is operated within its specified environmental conditions (temperature, humidity, dust level) to prevent premature wear.
  • Connections: Periodically check all wiring connections for tightness and signs of corrosion. Loose connections can lead to intermittent operation or damage.
  • Cleaning: Keep the exterior of the VFD clean and free from dust and moisture. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents.
Image showing the DC cooling fan and aluminum base for heat dissipation

Figure 10: DC cooling fan and aluminum base for effective heat dissipation.

9. Troubleshooting

This section provides general guidance for common issues. For complex problems, refer to the full email manual or contact technical support.

  • VFD Not Starting/Motor Not Running:
    • Check all power connections (R, S terminals for input, U, V, W for motor output).
    • Ensure the "Stop" button is not engaged and the VFD is powered on.
    • Verify parameter settings (e.g., p0.03, p0.04, p0.06, p2.02) match your motor's specifications.
  • Overload/Motor Stalling:
    • If the motor is under heavy load, consider if the VFD's horsepower rating is sufficient. A higher horsepower VFD might be required.
    • Check for mechanical issues with the motor or driven equipment.
  • Unexpected Behavior/Fault Codes:
    • Note any fault codes displayed on the digital display. Refer to the comprehensive manual for specific fault code meanings and remedies.
    • Ensure the VFD is properly grounded.
  • Noisy Operation:
    • While the VFD is designed for quiet operation (16KHz adjustable carrier), excessive noise might indicate an issue. Check motor bearings or VFD fan for obstructions.

10. User Tips

Based on common user experiences and best practices:

  • Initial Setup: Always double-check your motor's nameplate data (voltage, frequency, current) and ensure the VFD parameters are set accordingly before first use.
  • Motor Type: Remember this VFD is specifically for three-phase asynchronous motors. Using it with other motor types or as a general power supply will lead to malfunction.
  • Heat Management: Good ventilation around the VFD is crucial. Ensure the cooling fan is unobstructed and the aluminum base can dissipate heat effectively, especially during prolonged operation.
  • Documentation: Keep the full email manual accessible for detailed parameter explanations and advanced troubleshooting.

11. Warranty & Support

For warranty information, technical support, or any questions regarding the operation or maintenance of your Huanyang GT Series VFD, please contact the seller directly. They can provide specific guidance, additional resources, and a video demonstrating the basic functions of the VFD.

Remember that the full user manual with comprehensive details and advanced settings will be provided via email.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.