XIAOMI Mijia Wireless Floor Scrubber 4 Max

Contents

Xiaomi Mijia Wireless Floor Scrubber 4 Max

User Instruction Manual

Product Overview

The Xiaomi Mijia Wireless Floor Scrubber 4 Max is a versatile household appliance designed for comprehensive floor cleaning. It combines mopping, sweeping, and suction functionalities to tackle both wet and dry stubborn stains. Featuring advanced technologies like a rear-mounted cleaning arm, anti-entanglement roller brush, and a self-cleaning system, it offers an efficient and effortless cleaning experience.

Xiaomi Mijia Wireless Floor Scrubber 4 Max
Figure 1: Xiaomi Mijia Wireless Floor Scrubber 4 Max
Product overview with cleaning head details
Figure 2: Detailed view of the cleaning head and components.

1. Setup and Assembly

Before first use, please ensure all components are present and the device is properly assembled and charged.

1.1 Unpacking

  1. Carefully remove all components from the packaging.
  2. Verify that all parts listed in the package contents are included.
  3. Remove any protective films or packaging materials from the device.

1.2 Assembly

  1. Attach the handle to the main body of the floor scrubber. Ensure it clicks securely into place.
  2. Confirm that the clean water tank and dirty water tank are correctly inserted.

1.3 Initial Charging

  1. Connect the power adapter to the charging port on the device.
  2. Plug the adapter into a 220V power outlet.
  3. Allow the device to fully charge before its first use. The battery life is approximately 30-59 minutes on a full charge.

1.4 Filling the Clean Water Tank

  1. Remove the clean water tank from the device.
  2. Fill the tank with clean water, optionally adding a suitable floor cleaning solution. Do not exceed the maximum fill line. The liquid tank volume is less than 3 liters.
  3. Reinsert the clean water tank securely into the device.

2. Operating Instructions

The Xiaomi Mijia Wireless Floor Scrubber 4 Max offers multiple cleaning modes and advanced features for effective floor care.

2.1 Power On/Off

  • To power on, press and hold the power button located on the handle.
  • To power off, press and hold the power button again.

2.2 Cleaning Modes

The device features 3-4 operating modes. Use the mode selection button on the handle or the remote control/APP to switch between modes:

  • Standard Mode: For everyday cleaning of light dirt.
  • Strong Mode: For tackling stubborn stains with increased suction and water output.
  • Suction Only Mode: For vacuuming liquids without mopping.
  • Mopping Only Mode: For light mopping without strong suction (if available).

2.3 Cleaning Technologies in Action

Infographic detailing nine cleaning technologies
Figure 3: Overview of the nine cleaning technologies.
  • Strong Suction Power: With 23000Pa maximum suction power, the scrubber effectively cleans both wet and dry stubborn stains.
  • 5-Step Water Stain Control: This technology ensures quick drying and prevents slipping by precisely controlling water output and efficiently recovering dirty water.
  • Live Water Edge Washing: The device is designed to clean edges with zero distance, effectively removing stubborn stains along walls and furniture.
Live water edge washing technology illustration
Figure 4: Live water edge washing technology in action.
Diagram of 5 major water stain control technologies
Figure 5: Diagram illustrating the 5 major water stain control technologies.
Illustration of 23000Pa strong suction force
Figure 6: Visual representation of 23000Pa strong suction force.

2.4 Smart Features

  • LCD High-Definition Dynamic Color Screen: Provides real-time information about cleaning status, battery level, and selected mode.
  • Remote Control / APP Connectivity: The device supports remote control and can be connected to the Xiaomi Pengpai Zhilian APP for enhanced control and monitoring.

3. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your floor scrubber.

3.1 Emptying the Dirty Water Tank

  • After each use, remove the dirty water tank (capacity 0.6-1 L).
  • Empty the contents and rinse the tank thoroughly with clean water.
  • Allow the tank to air dry before reinserting.

3.2 Self-Cleaning System

  • The device features a boiling water self-cleaning system for the roller brush.
  • Initiate the self-cleaning cycle as instructed on the LCD screen or via the APP. This helps in decontamination and sterilization, preventing odors.

3.3 Roller Brush Maintenance

Close-up of the 4-layer anti-tangling roller brush system
Figure 7: The 4-layer anti-tangling roller brush system.
  • The 4-layer anti-tangling system reduces hair entanglement, but periodic inspection is recommended.
  • Remove the roller brush cover and clean any accumulated hair or debris from the brush.
  • Ensure the roller brush is properly reinstalled after cleaning.

3.4 HEPA Filter Cleaning

  • Locate the HEPA filter, typically found near the dirty water tank.
  • Remove the filter and tap it gently to dislodge dust.
  • Rinse the filter under running water if heavily soiled, ensuring it is completely dry before reinserting.

4. Troubleshooting

If you encounter issues with your Xiaomi Mijia Wireless Floor Scrubber 4 Max, refer to the following common problems and solutions:

Problem Possible Cause Solution
Device does not power on Low battery; Power button not pressed correctly Charge the device fully; Press and hold the power button firmly.
Poor suction performance Dirty HEPA filter; Clogged nozzle/roller brush; Full dirty water tank Clean or replace HEPA filter; Clear any blockages; Empty dirty water tank.
Water leakage Water tanks not installed correctly; Damaged seals Ensure clean and dirty water tanks are securely in place; Contact support if seals are damaged.
Roller brush not rotating Hair/debris tangled in brush; Brush not installed correctly Clean the roller brush and remove tangles; Reinstall the brush correctly.
Device not connecting to APP Bluetooth/Wi-Fi issues; APP not updated Ensure device and phone Bluetooth/Wi-Fi are on; Update Xiaomi Pengpai Zhilian APP to the latest version.

5. Specifications

Feature Specification
Brand Name XIAOMI
Function Mopping & Sweeping & Suction Type
Installation Vertical/Hand Held
Power (W) 300W
Voltage 220 V
Battery Type Li-ion
Battery Life 30-59 min
Maximum Suction Power 22AW (23000Pa)
Rotational Speed 450 rpm
Dust Box Capacity (L) 0.6-1 L
Liquid Tank Volume <3L
Filter Type HEPA
Bag Or Bagless Bagless
Cord Length (m) Wireless
Cleaning Route Random Type
Special Suction Nozzle Cleaning Brush
Number of Nozzles 1-3 nozzles
Number of Operating Modes 3-4
Turbo Brush Yes
Remote Control Yes
Maximum Noise 76dB
Body Weight (including battery) 8.09kg
Package Weight 15.0 kg
Package Dimensions (L x W x H) 70cm x 40cm x 30cm
Certification CE
Origin Mainland China

6. User Tips

  • For best results, ensure the clean water tank is filled and the dirty water tank is empty before each cleaning session.
  • Regularly check and clean the roller brush, especially if you have pets, to prevent tangling and maintain cleaning efficiency.
  • Utilize the self-cleaning function frequently to keep the roller brush hygienic and odor-free.
  • For heavily soiled areas, consider using the 'Strong Mode' or performing a pre-sweep to remove larger debris before wet cleaning.
  • Keep the HEPA filter clean to ensure consistent suction power and air quality.

7. Warranty and Support

This product is certified original. For any warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.