1. Introduction
The ZENGGE Bluetooth Pixel LED Controller offers versatile control over addressable LED strip lights such as WS2811, WS2812B, and SK6812. It features both mobile APP and remote control options, including music synchronization, various dynamic modes, and timing functions to enhance your lighting experience.
2. Safety Information
- Ensure the power supply voltage matches the requirements of your LED strip and controller (USB-5V for USB controllers, DC-5~24V for DC controllers). Using an incorrect voltage can damage the device.
- Always disconnect power before making any connections or disconnections.
- Do not expose the controller to moisture or extreme temperatures.
- Keep out of reach of children.
3. Package Contents
- 1 x LED Strip Light Controller
- (Remote control battery CR2025 is not included)
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | ZENGGE Bluetooth Pixel LED Controller |
| Features | Wireless APP or Remote Control |
| Oscillation frequency | 2.4Ghz |
| Connection Mode | DC / USB |
| Voltage | 5-24V |
| Material | ABS |
| Wattage | <1W |
| Power Source | DC |
| Max. Load Power | 2048Pixels |
| Remote Distance | 20m MAX |
| Applicable Lights | WS2812B SK6812 WS2811 LED Strip |
| Controled Method | Bluetooth |
| Brand Name | AELED |
| Item Type | RGB controler |
5. Setup Guide
5.1 Connection Diagrams
Ensure correct polarity and voltage when connecting your LED strip and power supply to the controller.


5.2 App Download
To use the mobile application for control, scan the QR code below to download the ZENGGE APP.

5.3 Remote Control Pairing
- Code Matching: Power on the device, then hold down the "ON" key on the remote for 5 seconds. The LED strip will flash slowly to indicate successful code matching.
- Code Clearing: Power on the device, then hold down the "OFF" key on the remote for 5 seconds. The LED strip will flash quickly to indicate successful clearing.
6. Operating Instructions
6.1 App Control
The ZENGGE APP provides comprehensive control over your LED strip lights. Ensure Bluetooth and location services are enabled on your mobile device for the app to function correctly.





- Color & Brightness: Adjust the color and brightness of your LED strip. The color and dynamic effect of each pixel can be set freely, with options for color block gradient or mixed gradient.
- Dynamic Modes: Choose from over 100 built-in modes, including jump mode, DIY mode, rainbow running water mode, meteor mode, and curtain mode.
- Music Mode: Synchronize your lights with music. The app can use your phone's microphone or device microphone to pick up audio.
- Timing Function: Set a timing delay switch to automatically turn the lights on or off.
Video: Demonstration of APP control and music synchronization.
6.2 Remote Control
The included 2.4G wireless remote control offers convenient access to essential functions. One remote can control multiple controllers.


| Button/Function | Description |
|---|---|
| Speed/Brightness +/- | Adjust speed of dynamic modes or brightness of static colors. |
| ON/OFF | Power on/off the LED strip. |
| Static Colors (CS, C3, C7) | Switch between 7 static colors (Red/Yellow/Green/Light Blue/Dark Blue/Purple/White). |
| Static RGB | Switch between 3 static colors (Red/Green/Blue). |
| Loop Mode | Activate built-in loop mode. |
| Modes +/- | Cycle through built-in modes. |
| DIY Mode 1-4 (S1, S2, S3, S4) | Hold for 2 seconds to record current mode, short press to trigger recorded mode. |
| Music Mode 1-4 | Activate 4 different lighting effects that change with the rhythm of external music (Jump/Breathing/Strobe/Running Water). |
| 30M / 1H | Set 30 minutes or 1 hour delay off timer. |
7. Maintenance
- Keep the controller clean and dry. Wipe with a soft, dry cloth if necessary.
- Avoid exposing the controller to direct sunlight or high humidity.
- Do not attempt to disassemble or repair the controller yourself, as this will void the warranty.
8. Troubleshooting
- Controller not responding: Check power connections and ensure the LED strip is correctly connected. Verify the remote control battery (CR2025, not included) is installed and functional. Try re-pairing the remote control.
- App not connecting: Ensure Bluetooth is enabled on your phone and the controller is powered on. Grant location permissions to the ZENGGE APP if prompted. Restart the app and/or your phone if issues persist.
- Lights not displaying correctly: Confirm that the LED strip type (e.g., WS2812B) is supported by the controller. Check for loose connections between the controller and the LED strip.
- For further assistance: If you encounter persistent operational problems, please refer to the F&Q section within the ZENGGE APP or contact customer support.
9. User Tips
- Voltage Matching is Crucial: Always ensure that the power supply voltage (5V, 12V, or 24V) matches the voltage requirements of your specific LED strip. For USB controllers, only use 5V LED strips. For DC controllers, ensure the power supply voltage matches the LED strip's voltage (e.g., 12V power for 12V LED strip).
- Remote Battery: Remember that the CR2025 battery for the remote control is not included in the package. Purchase and install it before attempting to use the remote.
- App Permissions: For seamless operation, ensure the ZENGGE app has necessary Bluetooth and location permissions on your mobile device.
10. Warranty and Support
This product comes with a 1-year warranty. For warranty claims, technical support, or any other inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.