1. Introduction
The Telesin Fun Shot P1-MP-10 is an intelligent magnetic phone grip designed to enhance your mobile photography experience, offering DSLR-style shutter control and a comfortable, stable hold. This manual provides detailed instructions for setting up, operating, and maintaining your device.
2. Package Contents
Please check the package to ensure all items are present:
- 1 x Camera Grip
- 1 x Magnetic Ring (for non-MagSafe phones/cases)
- 1 x Cleaning Kit
- 1 x Phone Lanyard
- 1 x Battery Removal Tool
- 1 x Instruction Manual
3. Setup Guide
3.1 Attaching the Magnetic Grip
The Fun Shot Magnetic Grip uses a strong magnetic connection to attach to your phone. The connection strength is significantly improved when used with a MagSafe case.
For MagSafe Phone or MagSafe Case Users:
Simply align the magnetic grip with the back of your iPhone 12 or newer model, or a phone equipped with a MagSafe compatible case. The magnets will securely snap into place.
For Non-MagSafe Phone or Non-MagSafe Case Users:
If your phone or case is not MagSafe compatible, use the included magnetic ring:
- Clean the back of your smooth phone case thoroughly using the provided cleaning kit.
- Carefully peel off the adhesive backing from the magnetic ring.
- Center the magnetic ring on the back of your phone case and press firmly.
- Allow the magnetic ring to sit for at least 2 hours before attaching the grip to ensure a strong bond.
NOTE: Do not attach the magnetic ring directly to the back of the phone. Always use it with a phone case.
3.2 Bluetooth Pairing
For Android Users:
Connect via Bluetooth directly. Once paired, you can use the grip's functions.
For iPhone Users:
After the first connection, you must enable the Zoom function for full functionality:
- Go to Settings.
- Navigate to Accessibility.
- Select Zoom.
- Press to activate the zoom button. When 'Zoom' is enabled, the screen will magnify.
- To restore the screen, double-tap with three fingers. Other settings remain unchanged.
4. Operating Instructions
4.1 Basic Functions
- Two-Stage Shutter: Functions like a DSLR camera shutter. Half-press to focus, full-press to capture a photo.
- Zoom Lever: Use the adjustable slider design for easy zoom control.
- Mode Switch: Toggle between different shooting modes (specific modes depend on your phone's camera app).
- Quick Camera Launch: Instantly open your phone's camera app for quick photo opportunities.
4.2 Quick Wake Function
The grip supports a quick wake function for various phone models:
- Supported Models: iPhone, Huawei, Honor, Xiaomi, OPPO, Vivo, OnePlus, Redmi, iQOO.
- Unsupported Models: Samsung / HarmonyOS NEXT 5.0 or above.
Wake Methods:
- Wake from Locked Screen (Screen Off): Long press Mode 1 button for 2 seconds. (Exception: Vivo/iQOO models require a double press).
- Wake from Unlocked Screen (Screen On but Locked): Long press Mode 1 button for 2 seconds. (Exception: iPhone requires a single click on the Mode 2 button).
4.3 Switching Orientation
The magnetic design allows for easy switching between horizontal and vertical shooting orientations. Simply rotate your phone while it's attached to the grip to capture freely in either landscape or portrait mode.
4.4 Remote Control Functionality
The grip features a detachable remote control with a range of up to 10 meters. This allows for remote shooting, perfect for group photos or stable long-exposure shots when the phone is mounted on a tripod (tripod not included).
4.5 Dual-Sided Magnetic Expandable Fill Light (Sold Separately)
The grip is designed to be stackable with an optional magnetic fill light (sold separately). This accessory provides adjustable three-color temperature lighting for various scenarios, including still life photography, selfie beauty lighting, and can even function as a cosmetic mirror or an additional cell phone holder.
5. Maintenance
- Cleaning: The grip features an anti-slip texture and soft silicone coating. To clean, gently wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive materials.
- Storage: Store the grip in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery: The grip uses an ultra-low power design, typically not requiring frequent charging. If battery replacement is needed, use the provided battery removal tool and follow the instructions in the full manual (if available) or consult customer support.
6. Troubleshooting
- Grip not attaching securely: Ensure your phone or case is MagSafe compatible, or that the magnetic ring is properly attached to a smooth phone case and allowed to cure for 2 hours. Check for any obstructions between the grip and the phone/case.
- Bluetooth connection issues: Ensure Bluetooth is enabled on your phone and the grip is in pairing mode. Try unpairing and re-pairing the device.
- Shutter/Zoom not working: For iPhone users, ensure the 'Zoom' accessibility function is enabled as described in Section 3.2. Check if your phone model is listed as supported for the specific function.
- Quick Wake Function not working: Verify your phone model is listed as supported for this feature (see Section 4.2). Ensure you are using the correct button press sequence for your device.
- Unsupported Phone Models: The grip may not be fully compatible with Samsung/HarmonyOS NEXT 5.0 or above. Some features might be limited or unavailable on these devices.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | TELESIN |
| Model | P1-MP-10 |
| DIY Supplies | Electrical |
| Max Loading Capacity | 2 kg (3 kg with magnetic case/ring) |
| Use | Mobile Phone |
| Function | Zoom Control, Wireless Remote Control, Simple Operation, Smart Steady |
| Bluetooth Standard | Bluetooth v5.0 |
| Battery Capacity | 130 mAh |
| Material | Aluminum Alloy |
| Weight | 109 g |
| Feature | Anti-Slip Texture, Ergonomic Finger Hook Design, 45mm Soothing Curvature, 9mm Scientific Finger Spacing |
| Remote Distance | 10 m |
| Origin | Mainland China (Guangdong) |
8. Warranty and Support
The Telesin Fun Shot P1-MP-10 comes with a 1-year warranty for all product types. If you encounter any defective accessories, new parts will be provided for free to replace them in the next order.
For technical support or warranty claims, please contact the seller or manufacturer directly. Refer to the contact information provided at the point of purchase.
9. User Tips
- Optimal Grip: The ergonomic design with 9mm scientific finger spacing and 45mm soothing curvature is engineered for comfort. Experiment with your hand position to find the most natural and stable grip for extended shooting sessions.
- Maximize Stability: For the most stable shots, especially in low light or when using the zoom, utilize the detachable remote control and mount your phone on a tripod.
- Protect Your Phone: Always use a phone case, especially when applying the magnetic ring for non-MagSafe devices, to prevent direct adhesive contact with your phone's surface. The silicone magnetic surface on the grip also helps prevent scratches.
- Battery Life: The ultra-low power consumption means you won't need to charge the grip frequently. This allows for prolonged use without battery worries.
