1. Product Overview
This product is a replacement dust bag designed for use with robot vacuum cleaners equipped with an automatic dust collection station. It is intended only for compatible dust collection bases that support disposable dust bags.
The Heloxyo dust bags feature a 4-layer effective filter system, designed to capture 99.99% of dirt and other particles, including dust, granules, hair, bacteria, debris, pet dander, and small particles.
Figure 1: Heloxyo 4-Layer Effective Filter System
Figure 2: Examples of debris captured by the dust bag
2. Safety Information and Usage Limitations
▲ WARNING / SAFETY INFORMATION
- Do not operate the dust collection base without a dust bag installed.
- Do not reuse disposable dust bags.
- Do not wash or clean the dust bag.
- Keep away from children and pets.
- Do not expose to fire or high heat.
- Disconnect power before replacing the dust bag.
Improper use may result in dust leakage or damage to the dust collection system.
Usage Limitations
This product is designed for collecting dry household dust, debris, hair, and fine particles, and is intended for indoor household use only, specifically within an automatic dust collection base.
❌ DO NOT use for:
- Liquids
- Construction dust, cement, plaster, or ash
- Sharp objects (glass, metal pieces, nails)
- Burning or high-temperature materials
- Industrial or commercial environments
Using the dust bag outside the above scope may cause leakage, blockage, or damage to the dust collection system.
3. Setup and Installation
Structure Explanation
Typical dust bag components:
- Inlet Cardboard Plate: Connects to the dust port.
- Sealing Collar / Inlet Ring: Ensures airtight connection.
- Multi-layer Filter Fabric: Captures fine dust.
- Dust Storage Chamber: Expandable internal space.
The dust bag automatically expands during use.
Step-by-Step Installation
- Power off the dust collection base: Unplug the power cord before installation.
- Open the top cover of the dust station: Lift gently until fully opened.
- Remove the used dust bag (if present):
- Hold the cardboard plate.
- Pull upward slowly to avoid dust release.
- Insert the new dust bag:
- Align the cardboard plate with the guide rails.
- Slide downward until fully seated.
- Check sealing position: Ensure the inlet ring fits tightly against the suction port. No visible gaps should remain.
- Close the top cover firmly: You should hear or feel a secure closure.
- Reconnect power: The system is now ready for use.
Video 1: Product overview and demonstration of bag unfolding and manufacturing process.
Figure 3: Proper insertion of the dust bag for optimal performance.
4. Operating and Functional Check
After installing the new dust bag, your robot vacuum's automatic dust collection station is ready for operation. The robot will perform auto-emptying as scheduled or initiated.
How to Confirm Correct Installation (Functional Check)
After the robot performs auto-emptying, verify the following:
- Normal suction sound is heard.
- No dust escapes from the station.
- No error indicator on the base.
If abnormal noise or weak suction occurs, recheck installation.
5. Maintenance and Replacement
Replacement Recommendation
For optimal performance:
- Replace dust bag every 30-60 days.
- Replace immediately if:
- Dust bag is full.
- Suction performance decreases.
- Strong odor is detected.
Replacement frequency depends on factors such as home size, cleaning frequency, and the amount of hair and dust collected.
6. Troubleshooting
Common Installation Problems & Solutions
| Problem | Possible Causes | Solution |
|---|---|---|
| Weak suction during auto-emptying | Dust bag not fully inserted, inlet not aligned. | Remove and reinstall the dust bag. Ensure the cardboard plate slides fully into place. |
| Dust leakage inside the base | Inlet ring not sealed, bag folded during installation. | Reinstall and smooth the inlet area. Confirm tight contact with suction port. |
| Base cover cannot close | Dust bag incorrectly positioned. | Remove bag and reinsert following guide rails. |
| Station reports dust bag error (if applicable) | Bag not detected due to misalignment. | Reinstall dust bag. Ensure correct vertical orientation. |
7. Specifications
These replacement dust bags are designed for high efficiency and durability.
| Feature | Detail |
|---|---|
| Material | Fabric (Non-Woven, Melt-Blown Cloth) |
| Filter System | 4-Layer Effective Filter System |
| Filtration Efficiency | Captures 99.99% of Dirt and Other Particles |
| Capacity | Up to 30 bins of dirt and debris |
| Dimensions (approx.) | 4.7 in (width) x 5.9 in (height) x 6.7 in (depth) |
| Compatibility | iRobot Roomba Clean Base i & s & j Series, including models:
|
| High-concerned chemical | None |
| Type | Vacuum Cleaner Parts (Bags) |
Figure 4: Product packaging showing 20 replacement vacuum dust bags and compatible models.
Figure 5: Approximate dimensions of a single dust bag.
8. Storage Instructions
- Store in a dry, cool environment.
- Avoid moisture and direct sunlight.
- Keep sealed until use.
9. User Tips
Based on common user inquiries:
- Compatibility with J7+: Yes, these bags are compatible with the iRobot Roomba J7+ model. The product is designed to fit all i, s, and j series Clean Base models.
- Ensure the bag is fully unfolded before insertion to maximize capacity and prevent sealing issues.
10. Compliance Information
This product is a household vacuum cleaner accessory.
- Designed for general household use.
- Contains no electronic components.
- No batteries included.
11. Customer Support
If you experience installation difficulties or have any questions:
- Recheck installation steps carefully.
- Ensure proper sealing of the dust bag within the clean base.
- Contact the seller for assistance.