1. Introduction
Thank you for choosing the RYSJM Digital Motorcycle Speedometer MT0117. This multi-functional digital odometer is designed to provide accurate and clear readings for various motorcycle parameters. It features an LED backlit instrument panel for visibility day and night and is built with rainstorm-level rainproof capabilities for durability.
This manual provides essential information for the safe and effective installation, operation, and maintenance of your new speedometer. Please read it thoroughly before use.
2. Safety Information
- Always ensure the motorcycle's power is off before attempting any installation or wiring.
- Incorrect wiring can damage the speedometer or the motorcycle's electrical system. If you are unsure, seek professional assistance.
- Ensure all connections are secure and insulated to prevent short circuits.
- Do not attempt to modify the speedometer, as this may void the warranty and pose safety risks.
- Keep the speedometer clean and free from excessive dirt or debris.
3. Package Contents
Upon opening the package, please verify that all items are present and undamaged:
- 1x RYSJM Digital Motorcycle Speedometer MT0117
For a visual guide to unboxing and initial inspection, please refer to the video below:
Video: Unboxing and initial display test of the RYSJM Digital Motorcycle Speedometer.
4. Specifications
| Feature | Description |
|---|---|
| Model Name | led digital speedometer for motorcycle (MT0117) |
| Brand Name | RYSJM |
| Material | ABS |
| Special Features | Waterproof, LED Backlit |
| External Testing Certification | CC |
| Item Length | 21cm (8.86in) |
| Item Width | 18cm |
| Item Height | 11cm (4.92in) |
| Item Diameter | 21cm |
| Item Weight | 566g |
| Max ODO Display | 999,999 km |
| Max Speed Display | 199 km/h |
| Max RPM Display | 12,000 r/min |
| Gear Display | Neutral, 1-6 gears |
Dimensions of the speedometer:
Image: Speedometer dimensions.
5. Installation
This speedometer is designed for specific Honda models. Please ensure compatibility before installation.
5.1 Compatible Models:
- Honda Wave 100 lama & EX5 Class 1 (years 2000 - 2006)
- Honda Wave CX (Alpha) (years 2016 - 2019)
- Honda Wave110s DX (years 2011-2014)
5.2 Wiring Instructions:
Refer to the wiring diagram below for correct connections. It is highly recommended to have this installed by a qualified technician.
Image: Wiring Diagram and Function Description for MT0117.
- Power Connections:
- Black Wire: Connect to Positive (+) power supply.
- Green Wire: Connect to Negative (-) / Ground.
- Indicator Lights:
- Orange Wire: Connect to Left Turn Signal.
- Light Blue Wire: Connect to Right Turn Signal.
- Blue Wire: Connect to High Beam.
- Green Red Wire: Connect to Neutral Gear Indicator.
- Brown Wire: Connect to Headlights.
- Gear Position Sensors:
- Pink Wire: Connect to 1st Gear sensor.
- Blue Red Wire: Connect to 2nd Gear sensor.
- Green Black Wire: Connect to 3rd Gear sensor.
- Yellow Red Wire: Connect to 4th Gear sensor.
- Purple Wire: Connect to 5th Gear sensor.
- Other Functions:
- Black Yellow Wire: Connect to Tachometer signal.
- Yellow White Wire: Connect to Oil Level sensor.
6. Operation
The RYSJM Digital Motorcycle Speedometer provides a clear and comprehensive display of your motorcycle's vital information. The LED backlit panel ensures readability in all lighting conditions.
Image: Speedometer Interface Display.
6.1 Display Functions:
- ODO Mileage: Displays total accumulated mileage up to 999,999 km.
- Speed: Shows current speed up to a maximum of 199 km/h.
- RPM: Displays engine revolutions per minute, with a maximum reading of 12,000 r/min.
- Gear Indicator: Shows the current gear (Neutral, 1st through 6th gear).
- Fuel Gauge: Features a 6-bar display for oil quantity. The fuel gauge symbol will flash when the oil quantity drops to 1 bar or less, indicating a low fuel level.
- Indicator Lights:
- Turn Signals: Green lights for both left and right turn indicators.
- High Beam: Blue light indicates high beam is active.
- Neutral: Green light indicates neutral gear.
- EFI: Engine Failure Indicator (Orange light).
- Headlights: The headlight icon on the instrument display illuminates in night mode.
7. Maintenance
- Cleaning: Use a soft, damp cloth to clean the display and casing. Avoid abrasive cleaners or solvents that could damage the plastic.
- Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion.
- Water Exposure: While the unit is rainstorm-level waterproof, avoid prolonged submersion or high-pressure washing directly on the display.
8. Troubleshooting
If you encounter issues with your speedometer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speedometer not powering on | Loose power connection, blown fuse, faulty wiring. | Check power (Black wire) and ground (Green wire) connections. Inspect motorcycle fuse box. Verify wiring integrity. |
| Incorrect speed reading | Incorrect speed sensor connection, sensor malfunction. | Ensure the speed sensor wire is correctly connected. Check the sensor for damage. |
| RPM not displayed or inaccurate | Tachometer signal wire (Black Yellow) not connected or faulty. | Verify the tachometer signal wire connection. |
| Gear indicator not working | Gear sensor wires (Pink, Blue Red, Green Black, Yellow Red, Purple, Green Red) are loose or faulty. | Check connections for all gear sensor wires. |
| Fuel gauge inaccurate or not working | Oil level sensor wire (Yellow White) not connected or faulty. | Inspect the oil level sensor wire connection and the sensor itself. |
| Indicator lights not illuminating | Loose connections for specific indicator wires. | Check the connections for the respective indicator light wires (Orange, Light Blue, Blue, Green Red, Brown). |
9. User Tips
- For optimal visibility, ensure the speedometer is mounted in a position that minimizes glare from direct sunlight.
- Regularly check the wiring harness for any signs of wear or damage, especially after riding in harsh conditions.
- If you experience intermittent readings, first check all electrical connections for tightness and corrosion.
10. Warranty and Support
For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
