1. Introduction
Thank you for choosing the Shengmilo M80 Electric Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your new e-bike. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.
2. Safety Information
⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- Always wear a helmet and appropriate safety gear when riding.
- Ensure all components are securely fastened before each ride.
- Do not ride under the influence of alcohol or drugs.
- Be aware of your surroundings and obey all traffic laws.
- Avoid riding in extreme weather conditions.
- Keep hands and feet away from moving parts.
3. Specifications
| Feature | Specification |
|---|---|
| Model Number | M80 |
| Motor Power | 350W / 500W Brushless Motor (depending on variant) |
| Voltage | 48V |
| Battery Capacity | 12.8AH / 15AH Lithium Battery (depending on variant) |
| Battery Net Weight | 4.5 KG |
| Charging Time | 5-6 hours |
| Range per Power | Pure Electric: 45-50 km, Assisted: 70-90 km (based on 60KG rider at normal temperature) |
| Max Speed | 35 KM/H (Max speed <25km/h for some regions) |
| Shift Level | Shimano TX55/21-speed rear derailleur |
| Instrument Display | 3.5-inch LCD large instrument |
| Wheel Size | 26 x 1.95 inches |
| Frame Material | All-aluminum alloy body |
| Handlebar Material | Aluminum alloy |
| Seat Tube Material | Aluminum alloy, height adjustable (80-100cm) |
| Front Fork Material | Aluminum alloy |
| Max Load Capacity | 150 KG |
| Shock Absorption | Spring shock absorption (front and rear) |
| Brake Type | Front and rear double disc brakes with power-off function (Mechanical or Hydraulic depending on variant) |
| Folded Dimensions | 100 x 40 x 93 cm |
| Unfolded Dimensions | 180 x 65 x 102 cm |
| Net Weight | 26 KG |
| Certification | CE |
| Waterproof Rating | IP54 (Motor) |
Image: Shengmilo M80 Electric Bike with dimensions 180cm (length) x 65cm (width) x 102cm (height).
Image: Shengmilo M80 Electric Bike folded, showing dimensions 100cm (length) x 40cm (width) x 93cm (height).
4. Setup and Assembly
Your Shengmilo M80 Electric Bike comes partially assembled. Follow these steps for final assembly:
- Unpacking: Carefully remove the bike and all components from the packaging. Retain packaging for future transport or storage.
- Handlebar Installation: Attach the handlebar to the stem, ensuring it is centered and tightened securely.
- Pedal Installation: Identify left (L) and right (R) pedals. Thread the left pedal counter-clockwise and the right pedal clockwise into the crank arms. Tighten firmly with a wrench.
- Seat Post Adjustment: Insert the seat post into the frame and adjust the height to a comfortable riding position. Secure with the quick-release lever.
- Tire Inflation: Inflate tires to the recommended pressure indicated on the tire sidewall.
- Brake Check: Ensure both front and rear brakes are functioning correctly. Adjust if necessary.
- Initial Charge: Fully charge the battery before your first ride.
Folding and Unfolding
The M80 features a quick-folding design for easy transport and storage.
- Folding: Locate the folding mechanism on the frame and handlebar stem. Follow the instructions to release and fold the bike. Ensure all locking mechanisms are engaged when folded.
- Unfolding: Reverse the folding process. Ensure all frame and handlebar locking mechanisms are securely latched before riding.
Image: The Shengmilo M80 Electric Bike folded and stored in a car trunk, demonstrating its portability.
5. Operating Instructions
5.1 Powering On/Off and Display
The bike is equipped with a 3.5-inch LCD smart control meter.
Image: Close-up of the handlebar showing the LCD display, power buttons, and gear shifter. The display shows speed, battery level, and mileage.
- Power On: Press and hold the power button on the display unit.
- Power Off: Press and hold the power button again.
- The LCD display shows accurate battery level, current speed, and riding mileage.
5.2 Riding Modes
The M80 offers three distinct riding modes:
Image: Diagram illustrating the three riding modes: Pure Electric (100% power, no pedaling), Assist Mode (50% power, smart assist with pedaling), and Riding Mode (0% power, manual pedaling).
- Pure Electric Mode (100% Power): Engage this mode for full electric propulsion without pedaling. Ideal for cruising.
- Assist Mode (0%-50% Output): The motor provides assistance based on your pedaling effort. This mode intelligently supplements your power, making rides easier, especially on inclines. The bike features 5 levels of pedal assist.
- Riding Mode (0% Power): This is a traditional bicycle mode where you control the speed entirely through pedaling. Useful for exercise or when the battery is depleted.
5.3 Shifting Gears
The bike is equipped with a Shimano TX55/21-speed shifting system (3 speeds on the front chainring, 7 speeds on the rear cassette).
Image: Close-up of the Shimano 21-speed shifting system, showing the front derailleur (3-speed) and rear cassette (7-speed).
- Use the shifters on the handlebar to change gears according to terrain and desired speed.
- You can freely switch between electric assist and manual gear changes while riding.
5.4 Braking System
The M80 features front and rear double disc brakes with a power-off function for quick and stable emergency braking.
Image: Close-up of the front mechanical disc brake system, highlighting the disc rotor and caliper.
- Apply both brakes gently and evenly to slow down or stop.
- The power-off function cuts motor power when brakes are applied, enhancing safety.
5.5 Lighting System
The bike is equipped with an LED front light and a rear LED warning light for enhanced visibility and safety during night riding.
Image: Top section shows the bright LED front light on the bike's handlebars. Bottom section shows the rear LED warning light integrated into the seat post.
- Turn on the lights for improved visibility in low-light conditions or at night.
- The front light provides wide-angle illumination, and the rear light acts as a warning for other road users.
6. Battery Information and Charging
The M80 uses a 48V Lithium Battery (12.8AH or 15AH depending on variant).
6.1 Battery Protection Features
The battery is equipped with an imported cell management system offering comprehensive protection:
Image: Diagram showing the battery with indicators for various protection features: overcurrent, overcharge, over-discharge, temperature, and wire break protection.
- Overcurrent Protection
- Overcharge Protection
- Over-discharge Protection
- Temperature Protection
- Wire Break Protection
6.2 Charging the Battery
The battery can be charged directly on the bike or removed for charging, offering convenience.
Image: Illustration showing the electric bike being charged while the battery is installed, and also showing the battery removed and charged separately.
- Connect the charger to the battery charging port and then to a power outlet.
- The charging time is typically 5-6 hours.
- Use only the charger provided with your e-bike.
- Do not leave the battery charging unattended for extended periods.
7. Maintenance
Regular maintenance ensures the longevity and safe operation of your Shengmilo M80 Electric Bike.
- Cleaning: Clean the bike regularly with a damp cloth. Avoid high-pressure washing directly on electrical components. The bike features an overall waterproof design, making it suitable for riding in rain, but avoid submerging it.
- Tires: Check tire pressure before each ride and inflate to the recommended PSI. Inspect tires for wear and damage.
- Brakes: Regularly check brake pads for wear and ensure brake levers are responsive. Adjust or replace as needed.
- Chain: Keep the chain clean and lubricated for smooth shifting and to prevent rust.
- Fasteners: Periodically check all bolts and nuts for tightness, especially on the handlebars, seat post, and wheels.
- Battery Care: Store the battery in a cool, dry place. If storing for an extended period, charge it to about 50-70% and recharge every 2-3 months.
- Shock Absorption: The bike features front and rear spring shock absorption. Inspect for any damage or leaks.
Image: The Shengmilo M80 Electric Bike shown with water splashing, illustrating its comprehensive waterproof design for worry-free riding in the rain.
Image: Close-up of the front wheel and fork, highlighting the spring front shock absorption system designed to filter out uneven roads.
Image: Close-up of the rear frame, showing the spring rear shock absorption system.
8. Troubleshooting
This section addresses common issues you might encounter with your M80 Electric Bike.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Low battery, loose battery connection, power button not pressed correctly | Charge the battery, ensure battery is securely seated, press and hold power button firmly. |
| Motor not assisting | Assist mode not selected, low battery, brake levers engaged, motor connection issue | Select an assist level on the display, charge battery, ensure brake levers are fully released, check motor cable connections. |
| Brakes feel weak | Worn brake pads, loose brake cable, air in hydraulic system (for hydraulic brakes) | Inspect and replace brake pads, adjust brake cable tension, consult a bike mechanic for hydraulic brake issues. |
| Gears not shifting smoothly | Dirty or unlubricated chain, misaligned derailleur, bent hanger | Clean and lubricate chain, adjust derailleur, consult a bike mechanic if issues persist. |
9. User Tips
- Handlebar Grip: The handlebar features an anti-slip design for better control and comfort during rides.
- Motor Performance: The 350W/500W brushless motor provides strong power, capable of climbing slopes up to 30 degrees with 510 RPM and 52NM torque. It also has an IP54 waterproof rating.
- Magnesium Alloy Wheels: The magnesium alloy integrated wheels are lighter and offer good shock absorption and noise reduction.
Image: Close-up of the handlebar grip, highlighting its anti-slip design for secure handling.
Image: Diagram illustrating the bike's motor, showing 350W power, 52NM torque, 510 RPM, 30-degree climbing capability, and IP54 waterproof rating.
Image: Close-up of the magnesium alloy 3-blade integrated wheel and the 350W high-speed motor, emphasizing the lightweight and shock-absorbing properties of the wheel material.
10. Warranty and Support
For warranty claims, technical support, or replacement parts, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase.