Microzone MC6CMini

Contents

Microzone MC6CMini 6-Channel Remote Control and Receiver Instruction Manual

Model: MC6CMini Remote Control & MC7RE-V2 Receiver

1. Introduction

The Microzone MC6CMini is an upgraded 6-channel digital proportional RC transmitter system designed for a wide range of remote-controlled models, including fixed-wing aircraft, multi-axis drones, cars, and boats. This manual provides essential information for the safe and effective operation of your MC6CMini remote control and its compatible MC7RE-V2 receiver.

Video: MicroZone MC6CMini remote control overview and basic operation.

Key Features:

  • Wide range of applications (cars, boats, fixed wing, multi-axis, lawn mowers, intelligent agricultural machinery)
  • Long control distance (>800m)
  • Long battery life (over 8 hours with 4-5 AA batteries or 2 lithium batteries)
  • Compact and lighter design compared to older models
  • Supports simulation training via computer connection
  • Runaway Protection Settings (Fail-safe)
  • Multiple customizable settings
  • Key Lock function
  • Key waterproof design
  • Mower throttle lock
  • Compatible with various MC series receivers (MC6RE-V2, MC7RB-V2, MC6RE, E6R-E, MC7RB, MC9002)

2. Product Overview

Microzone MC6CMini remote control, MC7RE-V2 receiver, and product packaging

Figure 2.1: MC6CMini Remote Control, MC7RE-V2 Receiver, and Packaging

Remote Control Components:

Diagram detailing the functions of the MC6CMini remote control's buttons and switches

Figure 2.2: Remote Control Function Analysis

  • Power Light: Indicates power status.
  • D/R Switch: Dual Rate switch.
  • Channel 5 Switch: Assignable switch.
  • Rocker (Left & Right): Control sticks for movement.
  • Throttle Trim (Left Hand Throttle): Adjusts throttle neutral point.
  • Elevator Trim (Right Hand Throttle): Adjusts elevator neutral point.
  • Rudder Trim: Adjusts rudder neutral point.
  • Aileron Trim: Adjusts aileron neutral point.
  • Mode Switch: Selects control mode.
  • Channel 6 Switch: Assignable switch.
  • Power Switch: Turns the remote control on/off.
  • MIX Button: Mix function.
  • AIL Button: Aileron channel forward and reverse setting (CH 1).
  • ELE Button: Lifting channel forward and reverse setting (CH 2).
  • THR Button: Throttle channel forward and reverse setting (CH 3).
  • RUD Button: Direction channel forward and reverse setting (CH 4).
  • LOCK Button: Key lock function.
  • V-Tail Mixed Control Indicator: Indicates V-tail mixing status.
  • Delta Wing Mixed Control Indicator: Indicates Delta wing mixing status.
  • Hybrid Control Function Switch: For hybrid control.
  • Channel Reverse Indicator: Indicates channel reverse status.
  • Lock Indicator: Indicates lock status.
  • Lock Switch: Activates/deactivates lock.

Receiver Components (MC7RE-V2):

Standard Receiver Analysis diagram with binding instructions

Figure 2.3: MC7RE-V2 Receiver Analysis

  • External Dual Antenna: For enhanced signal reception.
  • Bind Button: Used for pairing with the remote control.
  • PWM Signal Ports (1-7): For connecting servos and other PWM-controlled devices.
  • SBUS Signal Port: For connecting SBUS compatible devices.
  • Positive (+) and Negative (-) Poles: Power input for the receiver.

3. Setup

3.1 Battery Installation (Remote Control)

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery cover open.
  3. Insert 4-5 AA batteries or 2 compatible lithium batteries, ensuring correct polarity. The remote control is designed for long battery life, exceeding 8 hours of endurance.
  4. Close the battery cover securely.
Image showing battery installation in the remote control

Figure 3.1: Battery Installation

3.2 Receiver Connection

  1. Connect your servos, ESCs, and other components to the appropriate PWM channels (1-7) on the MC7RE-V2 receiver.
  2. If using SBUS, connect your SBUS-compatible device to the SBUS port.
  3. Ensure the receiver is powered by a DC 4.5-6V source, connected to the positive (+) and negative (-) poles.
Example connection of remote control, receiver, battery, and servo connected

Figure 3.2: Example Receiver Connections

3.3 Binding Process

To establish communication between the remote control and the receiver:

  1. Power on the receiver.
  2. Press and hold the 'BIND' button on the MC7RE-V2 receiver.
  3. While holding the 'BIND' button, turn on the power switch of the MC6CMini remote control.
  4. The binding process is successful when the indicator lights on both the remote control and receiver show a solid connection (refer to specific LED indicators for your model).

3.4 Fail-Safe Setting (Runaway Protection)

The MC6CMini supports fail-safe protection. This feature ensures that if the receiver loses signal from the transmitter (e.g., due to interference or being out of range), it will automatically move the control surfaces to a pre-set position to prevent damage or loss of the model. Consult your model's specific requirements for optimal fail-safe settings.

Diagram explaining runaway protection

Figure 3.3: Runaway Protection Concept

4. Operating Instructions

4.1 Basic Operation

  • Power On: Turn on the remote control first, then power on your model (receiver).
  • Power Off: Power off your model (receiver) first, then turn off the remote control.
  • Control Sticks: Use the left and right rocker sticks to control the movement of your model.
  • Trims: Use the trim buttons (Throttle, Elevator, Rudder, Aileron) to fine-tune the neutral position of your control surfaces for stable flight/movement.
  • Channel Switches (CH.5, CH.6): These are assignable switches for auxiliary functions on your model.

4.2 Advanced Settings

  • Channel Reverse: Use the AIL, ELE, THR, RUD buttons to reverse the direction of specific channels if your model responds incorrectly.
  • Key Lock: The LOCK button activates a key lock function to prevent accidental input.
  • D/R Switch: Adjusts the dual rate for control sensitivity.
  • Mode Switch: Changes the control mode, typically affecting stick assignments (e.g., Mode 1, Mode 2).
  • Mix Function: The MIX button activates mixing functions for complex control setups (e.g., V-tail, Delta wing).

4.3 Simulation Training

The MC6CMini remote control can be connected to a computer for simulation training. This allows you to practice controlling your model in a virtual environment without risking damage to your physical model.

Image showing simulation training with the remote control

Figure 4.1: Simulation Training Setup

To use simulation training, connect the remote control to your computer via the audio interface (dongle use) located on the side of the remote control.

Back of remote control showing battery compartment, audio interface (for computer and simulation dongle use), and external DC6V power supply input

Figure 4.2: Remote Control Ports (Audio Interface for Simulation)

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the remote control and receiver. Avoid using harsh chemicals or solvents.
  • Storage: Store the remote control and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
  • Water Resistance: The MC6CMini features a key waterproof design, but it is not fully submersible. Avoid exposing it to heavy rain or submersion in water.
  • Antenna Care: Handle the receiver's external dual antennas carefully to avoid bending or damaging them, as this can affect signal reception.

6. Troubleshooting

  • No Power: Check battery installation and ensure batteries are charged.
  • No Signal/Loss of Control: Re-bind the receiver to the remote control. Ensure the model is within the control range (>800m). Check for potential interference sources.
  • Incorrect Control Response: Verify channel reverse settings using the AIL, ELE, THR, RUD buttons. Check servo connections to the receiver.
  • Intermittent Operation: Ensure all connections are secure. Check for low battery voltage in both the remote control and the model.

7. Specifications

MC6CMini Remote Control:

FeatureSpecification
ModelMC6CMini
ColorGrayish white
Number of Channels6
Applicable ModelsFixed wing, car, boat, multi-axis, lawn mower, intelligent agricultural machinery
Control Range>800m
Frequency Range2401MHz-2478MHz
Rocker Dynamic Range80%-120%
Fine-tuning ModeElectronic trimming
Transmit Power≤100mw
Input VoltageDC4.5-9V
Remote Control Power Supply Requirements4-5 AA batteries or 2 lithium batteries
Low Voltage AlarmYes
Analog Interface (PPM)Yes
Channel Forward and Reverse IndicationSupport
Runaway Protection SettingsSupport
LED IndicationSupport
Dimensions160*80*165mm
Weight470g
Dimensions of the remote control

Figure 7.1: MC6CMini Remote Control Dimensions

MC7RE-V2 Receiver:

FeatureSpecification
ModelMC7RE-V2
ColorBrown transparent
ApplicationFixed wing, multi-axis, car, boat
Channel Output7 PWM signals, 1 SBUS signal
Frequency Band2401MHz-2478MHz
Receiving Distance>800m
Receiver Power Supply VoltageDC:4.5-6V
SBUS SignalSupport
Binding MethodButton binding
Recovery PerformanceFast signal recovery
Fail-safe Protection SettingSupport
Supported Transmitters6C-MINI, C7-MINI, 8B-MINI
Antenna TypeExternal dual antenna
Antenna Length160mm
Dimensions (LWH)37*24*13 (mm)
Weight7g
Dimensions of the MC7RE-V2 receiver

Figure 7.2: MC7RE-V2 Receiver Dimensions

8. User Tips

  • Always perform a range check before operating your model, especially in new environments, to ensure reliable control.
  • Familiarize yourself with the remote control's functions through simulation training before attempting to control a physical model.
  • Regularly check battery levels in both the remote control and your model to avoid unexpected power loss during operation.
  • When connecting the receiver, ensure all wires are securely plugged in and correctly oriented to prevent damage or malfunction.
  • The MC6CMini's compact size makes it convenient for transport, but always store it in a protective case to prevent damage to the sticks and switches.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.