1. Introduction
Thank you for choosing the Xiaomi Mijia Vertical Garment Steamer ZQGTJ02KL. This powerful and efficient garment steamer is designed to quickly remove wrinkles and refresh your clothes with high-temperature steam. Please read this manual carefully before use to ensure safe and optimal performance.
2. Important Safety Information
WARNING: The rated voltage of this product is 220V. If the voltage in your country does not meet 220V, please do not purchase or use this product without a suitable voltage converter, as it may cause damage to the appliance or pose a safety risk.
- Always ensure the appliance is unplugged before filling with water, cleaning, or when not in use.
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Keep the steamer out of reach of children and pets.
- Use only distilled or demineralized water to prevent mineral buildup and prolong the life of the steamer.
- Do not direct steam at people, animals, or electrical appliances. Steam is hot and can cause burns.
- Use the provided anti-scalding gloves when handling the hot ironing head.
- Ensure the water tank is securely in place before operating.
- Do not operate the steamer if the power cord or plug is damaged.
3. Package Contents
Please check the box for the following items:
- Host (Main Unit) x1
- Anti-scalding gloves x1
- Clothes hanging rail x1
- Middle pole x2
- Ironing head holder x1
- Ironing board x1
- Backswing x2
- Downswing x2
- Instruction Manual x1

Depending on your region, a suitable plug adapter may be included:

4. Assembly and Setup
Follow these steps to assemble your garment steamer:
- Assemble the Poles: Connect the two middle poles and two lower poles to form the main vertical support. Ensure they click securely into place.
- Attach the Clothes Rail: Secure the clothes hanging rail to the top of the assembled poles.
- Install the Ironing Head Holder: Attach the ironing head holder to the main unit at a convenient height.
- Mount the Ironing Board: Position the ironing board onto the designated slots on the main unit.
- Connect the Steaming Head: Insert the steaming head hose into the main unit's steam outlet.
- Fill the Water Tank: Remove the 2.3L water tank from the base. Open the cap, fill it with distilled or demineralized water, and securely close the cap. Place the water tank back into the base, ensuring it is properly seated.


5. Operating Instructions
- Power On: Plug the steamer into a suitable 220V power outlet. The indicator light will illuminate.
- Warm-up: The steamer features a 30-second fast warm-up. Wait for the indicator light to change or stop flashing, indicating it's ready for use.
- Select Steam Gear: The steamer offers 2-gear steam regulation. Use the controls on the handle to select the desired steam intensity. A higher gear provides more powerful steam, suitable for thicker fabrics.
- Steaming Garments: Hang your garment on the clothes rail. Hold the steaming head approximately 1-2 inches away from the fabric. Press the steam trigger on the handle to release continuous steam. Move the steaming head slowly over the fabric, from top to bottom, to remove wrinkles.
- Using the Ironing Board: For stubborn wrinkles or to create crisp creases, press the garment against the large ironing board while applying steam. Always use the anti-scalding gloves provided.
- High-Temperature Fine Steam: The steamer produces 130°C high-temperature fine steam, which helps to smoothen folds and can kill bacteria and mites.
- Large Steam Output: With a 36 g/min large steam output and 300kPa pump pressure, the steamer can easily penetrate heavy winter clothes for efficient wrinkle removal.
- Power Off: After use, release the steam trigger, unplug the appliance, and allow it to cool down completely before storing.




6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your steamer.
- Empty Water Tank: After each use, empty any remaining water from the tank.
- Clean Water Tank: Periodically rinse the water tank with clean water to remove any residue.
- Descaling: If you notice reduced steam output or mineral buildup, descale the steamer. Mix equal parts white vinegar and water, fill the tank, and run the steamer until half the solution is used. Turn off, unplug, and let it sit for 30 minutes. Then, run the remaining solution through. Finish by running two tanks of clean water through the steamer to rinse.
- Wipe Exterior: Wipe the exterior of the steamer with a soft, damp cloth. Do not use abrasive cleaners.
- Storage: Store the steamer in a cool, dry place. Ensure the hose is not kinked during storage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam or low steam output | Water tank empty; mineral buildup; steamer not heated sufficiently. | Refill water tank; descale the steamer; allow adequate warm-up time. |
| Water leaking from steaming head | Overfilling water tank; condensation; hose not properly connected. | Do not overfill; allow steamer to heat fully before use; ensure hose is securely attached. |
| Steamer not turning on | Not plugged in; power outlet issue; appliance fault. | Check power connection; try a different outlet; contact customer support if problem persists. |
8. Specifications
| Parameter | Value |
|---|---|
| Product Name | Mijia Vertical Garment Steamer |
| Product Model | ZQGTJ02KL |
| Product Color | White |
| Water Tank Capacity | 2.3L |
| Product Size | 430 x 310 x 1583mm |
| Product Net Weight | 5.6kg |
| Rated Voltage | 220V~ |
| Rated Frequency | 50Hz |
| Rated Power | 2000W |
| Steam Pressure | 300kPa |
| Continuous Steam Output | 36g/min |
| Warm-up Time | 30 seconds |

9. User Tips
- For best results, always use distilled or demineralized water to prevent mineral buildup and extend the life of your steamer.
- When steaming delicate fabrics, hold the steaming head slightly further away to avoid direct contact.
- For very stubborn wrinkles, gently pull the fabric taut with one hand while steaming with the other.
- The multi-use coat rack is designed for convenience; utilize it to hang various garments during steaming.
- Always allow the steamer to cool down completely before storing to prevent accidental burns or damage.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact your local Xiaomi customer service center. Keep your purchase receipt as proof of purchase for warranty claims.