Introduction
This manual provides detailed instructions for the safe operation, setup, maintenance, and troubleshooting of your Flytec V060 Carbon Fiber RC GPS Carp Fishing Bait Boat. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Figure 1: Flytec V060 Carbon Fiber RC GPS Carp Fishing Bait Boat
Safety Information
- Always operate the bait boat in open water, away from swimmers, other boats, and obstacles.
- Do not operate in strong winds (above level 7-8) or extreme weather conditions.
- Ensure all battery compartments are securely sealed before placing the boat in water.
- Keep hands and loose clothing away from propellers when the boat is powered on.
- Supervise children when operating the bait boat.
- Do not attempt to modify the boat or remote controller, as this may void the warranty and create safety hazards.
- Always turn off the boat and remote controller when not in use.
Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact customer service.
- Flytec V060 Bait Boat (Carbon Black)
- GPS Remote Controller
- Battery (7.4V 5200mAh/12000mAh/18000mAh - optional, check your order)
- Charger
- User Manual (this document)
- Other accessories (e.g., spare propellers, tools - may vary)
Product Overview
Key Features:

Figure 2: Main Functions Overview
- Loading Capacity: Up to 2KG (4 catties) maximum bait load.
- Control Distance: 500 meters with 2.4G long-range anti-interference technology.
- GPS Functionality: 160 positioning points across 4 customizable fishing grounds (40 points per ground).
- Navigation: Forward, backward, left/right turns, cruise control, automatic yaw correction.
- Safety Features: Low battery warning, one-click return, low battery return, lost contact return, over-distance return.
- Lighting: Bright night navigation lights (two white at bow, blue steering lights at stern) with constant on/flashing modes.
- Power System: Powerful dual motors, supports dual battery uninterrupted power supply (e.g., two 5200mAh or two 12000mAh batteries).
- Design: Foldable handle, anti-tangle protection cover for propellers, large bait tank.
- Controller: LCD display screen for easy operation, Beidou Intelligent Calibration System.
Core Details:

Figure 3: Foldable Handle, Anti-Tangle Protection Cover, Dual Battery Compartments, Large Bait Tank
- Foldable Handle: For easy transport and storage.
- Anti-Tangle Protection Cover: Protects propellers from weeds and debris.
- Dual Battery Compartments: Allows for extended operation time by accommodating two batteries simultaneously.
- Large Bait Tank: Designed for efficient bait deployment.
Remote Controller Layout:

Figure 4: GPS Remote Controller with Labeled Functions
- Antenna: For signal transmission.
- Lighting button: Controls boat lights.
- Power indicator: Shows controller power status.
- Left joystick: Controls forward/backward movement and turning.
- Pairing button: For linking controller with boat.
- Switch: Power ON/OFF.
- Left trim: Adjusts left/right balance.
- Calibration: Initiates Beidou Intelligent Calibration.
- Cruise button: Activates/deactivates fixed-speed cruise.
- Original point button: Sets or returns to the original point.
- Delete button: Deletes saved positioning points.
- Fixed-speed cruise: Indicator/button for cruise mode.
- Silo button: Controls bait tank release.
- Right joystick: Fine-tunes movement or specific functions.
- Right trim: Adjusts left/right balance.
- Setting button (Up, Left, Right, Down): Navigates menus and adjusts settings on the LCD.
Specifications
| Feature | Detail |
|---|---|
| Color | Carbon Black |
| Battery Options | 7.4V 5200mAh / 12000mAh / 18000mAh (optional) |
| Playing Time | 2-6 hours (depending on battery capacity and usage) |
| Charging Time | 4-8 hours |
| Speed | 250 meters/minute |
| Control Distance | 500 meters |
| Product Size (L x W x H) | 51.4 x 26.4 x 29.5 cm (20.2 x 10.4 x 11.6 inches) |
| Bait Tank Size (L x W x D) | 16.9 x 15.8 x 6 cm (6.7 x 6.2 x 2.4 inches) |
| Product Weight | 1849g |
| Max Bait Load | 2KG (4 catties) |
| Wind Resistance | Level 7-8 |
| GPS Positioning Points | 160 (4 fishing grounds, 40 points each) |
| Origin | Mainland China |
| Certification | CE |

Figure 5: Bait Boat Dimensions
Setup
1. Battery Installation
The Flytec V060 supports dual battery configurations for extended use. Ensure batteries are fully charged before installation.

Figure 6: Large Battery Compartment supporting dual batteries
- Locate the battery compartment cover on the top of the bait boat.
- Open the cover and carefully insert the charged 7.4V batteries into the compartments. The compartment size is 12.1 x 6.1 x 8 cm.
- Connect the battery connectors to the boat's power ports.
- Securely close the battery compartment cover to ensure a watertight seal.
2. Remote Controller Setup
- Install the required batteries (not included) into the remote controller.
- Extend the antenna on the remote controller.
- Turn on the remote controller using the power switch.
- Turn on the bait boat. The boat and controller should automatically pair. If not, press the pairing button on the controller as indicated in Figure 4.
3. Initial Calibration (Beidou Intelligent Calibration System)
Before first use or if experiencing navigation issues, perform a calibration:
- Place the boat on a flat, stable surface.
- Turn on both the boat and the remote controller.
- Press the "Calibration" button on the remote controller (refer to Figure 4).
- Follow any on-screen prompts on the controller's LCD display. The boat will perform a self-check and calibrate its Beidou GPS system.
Operating Instructions
1. Basic Movement
- Forward/Backward: Use the left joystick to move the boat forward or backward.
- Turning: Use the left joystick to steer the boat left or right.
- Yaw Correction: The boat features automatic yaw correction for stable sailing.
- Motor Speed Adjustment: Fine-tune motor speed using the remote controller's controls.
2. GPS and Positioning

Figure 7: Illustrating 160 Positioning Points across 4 Fishing Grounds

Figure 8: Examples of Fishing Grounds
- Setting Positioning Points: Navigate the boat to your desired location and press the "Original point button" (Figure 4) to save it. Each of the 4 fishing grounds can store up to 40 points.
- Navigating to Points: Select a saved point using the setting buttons (Up, Down, Left, Right) on the remote controller, then activate the navigation function.
- Deleting Points: Use the "Delete button" (Figure 4) to remove unwanted positioning points.
3. Cruise Control

Figure 9: Activating Fixed-Speed Cruise Control
To activate fixed-speed cruise control:
- Push the direction control stick (left joystick) forward.
- While holding the joystick forward, press the "Cruise button" (Figure 4) for approximately 2 seconds.
- The boat will enter fixed-speed cruise mode, maintaining a constant speed in the current direction. The sailing direction can still be adjusted using the remote control.
4. Bait Tank Operation
The large bait tank can hold up to 2KG of bait. To release bait, press the "Silo button" on the remote controller (Figure 4).
5. Night Fishing Lights

Figure 10: Night Navigation Lights in Operation
The boat is equipped with two white navigation lights at the bow and blue steering lights on both sides of the stern. Use the "Lighting button" (Figure 4) to toggle between constant on and flashing modes, or to turn them off. These lights help identify the boat's direction in low light conditions.
6. Automatic Return Functions

Figure 11: Low Battery and Over-Distance Return Warnings
The boat features several automatic return mechanisms:
- One-Click Return: Press the designated return button on the remote controller to send the boat back to its original starting point.
- Low Battery Return: If the boat's battery level drops too low, it will automatically return to the original point.
- Lost Contact Return: If the remote control signal is lost, the boat will automatically return to the original point.
- Over-Distance Return: If the boat exceeds the 500-meter control range, it will automatically return to the original point.
Maintenance
1. Cleaning
- After each use, thoroughly rinse the boat with fresh water to remove any salt, dirt, or debris.
- Pay special attention to the propellers and the anti-tangle protection cover. Remove any tangled fishing lines or weeds.
- Wipe the boat dry with a soft cloth.
- Ensure the battery compartment is clean and dry before closing.
2. Storage
- Store the bait boat and remote controller in a cool, dry place, away from direct sunlight and extreme temperatures.
- Remove batteries from both the boat and the remote controller if storing for an extended period.
- Ensure the boat is completely dry before storage to prevent mold or corrosion.
3. Battery Care
- Always use the provided charger or a compatible charger for your batteries.
- Do not overcharge or over-discharge batteries.
- Store batteries in a cool, dry place, ideally at a partial charge (around 50%) if not used for a long time.
- Inspect batteries regularly for any signs of damage or swelling. Discontinue use immediately if damage is observed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Boat does not respond to remote. |
|
|
| Boat moves erratically or drifts. |
|
|
| Bait tank does not open. |
|
|
| GPS positioning is inaccurate. |
|
|
User Tips
- For optimal battery life, consider purchasing and using two 12000mAh batteries simultaneously.
- Practice basic controls in an open, calm body of water before attempting complex GPS navigation.
- Always monitor the remote controller's LCD for low battery warnings to prevent unexpected automatic returns.
- When setting GPS points, ensure the boat is stable and the signal is strong for accurate saving.
Warranty and Support
For any product inquiries, technical support, or warranty claims, please contact the seller directly. Keep your purchase receipt as proof of purchase.
Contact Information:

WhatsApp: +86 16633953613
Email: jinpin13@126.com