Introduction
Thank you for choosing the Joyroom JR-ZS505 Magnetic Car Phone Holder. This manual provides essential information for the proper setup, operation, and maintenance of your new device. Please read it thoroughly before use to ensure optimal performance and safety.

Figure 1: Joyroom JR-ZS505 Magnetic Car Phone Holder
Package Contents
Please verify that all items are present in your package:

Figure 2: Package Contents
- Product Box
- Instruction Manual
- Positioning Paper
- Magnetic Phone Holder
- Metal Sheet (for non-MagSafe compatible devices/cases)
- Stickers
- Alcohol Pack (for cleaning surface)
Setup Instructions
- Choose Mounting Location: Select a flat, clean surface on your car's dashboard or windshield. The holder's flexible suction cup and 3M adhesive are designed for secure adhesion, even on curved dashboards.

Figure 3: Holder on a Curved Dashboard
- Clean the Surface: Use the provided alcohol pack to thoroughly clean the chosen mounting area. Allow it to dry completely.
- Attach the Holder: Remove the protective film from the 3M adhesive base of the holder. Press the holder firmly onto the cleaned surface for at least 30 seconds to ensure strong adhesion. Allow the adhesive to cure for 24 hours before attaching your phone.

Figure 4: Premium 3M Adhesive Solution
- Prepare Your Phone (if not MagSafe compatible):
- If your phone or phone case is not MagSafe compatible, use the included metal sheet.
- Clean the back of your phone or phone case where you intend to place the metal sheet.
- Use the positioning paper to find the optimal placement for the metal sheet, typically centered on the back of your phone for best magnetic alignment.
- Peel off the adhesive backing from the metal sheet and firmly attach it to your phone or case.

Figure 5: Wide Compatibility and Metal Ring Placement
Operating Instructions
- Attaching Your Phone: Simply bring your MagSafe-compatible phone (or phone with the attached metal sheet) close to the magnetic ring of the holder. The strong magnets will automatically secure your phone in place, allowing for convenient one-handed operation.

Figure 6: Magnetic One-Handed Operation
- Adjusting the Viewing Angle:
- The holder features a 360° rotatable base, allowing you to swivel your phone to any desired orientation (portrait or landscape).
- The dual metal hinge and metal support arm structure provide multiple adjustment points for height and tilt, ensuring you can achieve the perfect viewing angle for navigation or calls.

Figure 7: 360° Rotatable Base

Figure 8: Adjustable Folding Positions
- Detaching Your Phone: Gently pull your phone away from the magnetic ring.
Product Demonstration Video
Video 1: Visual guide to installing and using the Joyroom JR-ZS505 holder.
Maintenance
- Cleaning the Holder: Wipe the holder with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish or adhesive.
- Cleaning the Adhesive Base: If the adhesive base loses its stickiness, gently rinse it with water and let it air dry. Do not wipe it with a cloth, as this can leave lint.
- Storage: When not in use for extended periods, store the holder in a cool, dry place away from direct sunlight.
Troubleshooting
- Phone not holding securely:
- Ensure your phone or case is MagSafe compatible, or that the metal sheet is correctly applied and centered.
- Verify that the phone's weight does not exceed the holder's capacity (supports up to 8lbs).
- Check for any obstructions or uneven surfaces between the phone and the magnetic ring.
- Holder not adhering to the surface:
- Ensure the mounting surface was thoroughly cleaned with the alcohol pad and completely dry before application.
- Press firmly on the base for the recommended time during installation.
- Allow the adhesive to cure for 24 hours before placing a phone on the holder.
- The holder is not compatible with uneven phone cases such as "Inside the cases", "Armor Phone Case", "Silicone Phone Case", "Leather Phone Case", "Uneven Phone Cases", or "Suede Case".
- Difficulty adjusting the angle:
- The hinges are designed to be sturdy. Apply gentle, firm pressure to adjust the arm and base.
Specifications
| Attribute | Detail |
|---|---|
| Type | Car Holder |
| Features | Magnetic, Foldable, 360° Rotatable Base |
| Compatible Brand | Universal (MagSafe compatible or with metal ring) |
| Charger | No |
| Model Number | JR-ZS505 |
| Brand Name | Joyroom |
| Origin | Mainland China |
| Material | PC+ABS+Zinc Alloy |
| Net Weight | 66g |
| Applicable Phone Size | 4.7-7.0 Inches |
| Magnetic Force | Upgraded 3mm+3mm N55 Magnet Array, supports up to 8lbs |
| Package Dimensions (L x W x H) | 13cm x 10cm x 3cm |
| Package Weight | 0.11kg |
User Tips
Based on general usage and product design, here are some tips for an enhanced experience:
- For optimal magnetic hold, ensure the metal ring (if used) is perfectly centered on your phone or case.
- When adjusting the holder, use both hands to support the base and the arm to prevent accidental detachment from the mounting surface.
- Consider the viewing angle carefully before permanently adhering the holder, especially on curved dashboards, to ensure it doesn't obstruct your view or controls.
Warranty & Support
For warranty information or technical support, please refer to the official Joyroom website or contact their customer service directly. Keep your purchase receipt as proof of purchase.