1. Introduction
The MINI ESP32-S3-N16R8 Development Board is a versatile module designed for AI vision, speech processing, and IoT applications. Featuring an ESP-S3 dual-core processor, it supports Wi-Fi and Bluetooth 5.0 connectivity. This board can be integrated into various projects, including AI dialogue robots, smart home devices, and industrial control systems. An optional 0.96-inch OLED screen provides graphical display and interactive operation.
Video: Overview of the MINI ESP32-S3-N16R8 Development Board with OLED screen and speaker module.
2. Setup Guide
2.1 Package Contents
- MINI ESP-S3-N16R8 Development Board (AI voice firmware burned)
- Speaker wiring
- 0.96-inch OLED screen (optional)

Image: Individual components of the development board kit, including the main board, OLED screen, and speaker module.
2.2 Hardware Assembly
- If using the optional OLED screen, carefully align and connect it to the designated pins on the development board.
- Connect the speaker wiring to the white JST connector on the development board. Ensure correct polarity if indicated.
- Connect the development board to a power source via the Type-C USB port.
2.3 Network Configuration (Wi-Fi)
To enable AI voice dialogue and other network-dependent features, the device needs to be connected to a Wi-Fi network.
- Power Up and Enter Distribution State: Power up the device. Tap the designated button (usually a function button or IO0) three times quickly to enter the distribution state. The OLED screen (if present) may display a network configuration mode message.
- Connect to Device Hotspot: On your mobile phone or computer, go to Wi-Fi settings and connect to a Wi-Fi network that starts with