RIGOL DM3058 DM3068

Contents

RIGOL DM3058 & DM3068 Digital Multimeter User Manual

Models: DM3058, DM3068

1. Introduction

The RIGOL DM3058 and DM3068 are high-performance 5½ and 6½-digit True RMS (TRMS) Digital Multimeters designed to meet the needs of high-precision, multifunction, and automatic measurement applications. These instruments offer excellent performance, abundant features, and are suitable for various fields including research and development, education, industrial electronics, and automotive industries.

The DM3058 provides 5½ digits readings resolution and up to 123 readings/second measurement speed. The DM3068 offers 6½ digits readings resolution and up to 10,000 readings/second measurement speed.

2. Product Overview

2.1 Front Panel

RIGOL DM3058 Front Panel Layout
Figure 1: Front Panel of DM3058 Digital Multimeter, showing LCD display, navigation keys, function keys, and input terminals.
RIGOL DM3068 Front Panel Layout and Features
Figure 2: Front Panel of DM3068 Digital Multimeter, highlighting LCD Display, Navigation Key, Run Control, Inputs, USB Host, Function Keys, and Other Functions.

2.2 Rear Panel

RIGOL DM3058 DM3068 Rear Panel Connections
Figure 3: Rear Panel of the Multimeter, showing 200mA Current Input Fuse, Ext Trig, LAN, GPIB, USB, RS-232, and AC Power Input with Fuse.

2.3 Included Accessories

RIGOL DM3058 DM3068 Included Accessories
Figure 4: Standard accessories include power cord, test leads, USB cable, and fuses.

3. Setup

3.1 Power Connection

  1. Ensure the power switch on the rear panel is in the OFF position.
  2. Verify the correct voltage setting for your region (AC 100-120V or AC 200-240V) using the selector near the power input on the rear panel (refer to Figure 3).
  3. Connect the provided power cord to the AC power input on the rear panel and then to a suitable AC power outlet.

3.2 Test Lead Connection

For most measurements, connect the red test lead to the VΩHz input terminal and the black test lead to the COM input terminal on the front panel. For current measurements, connect the red test lead to the A or mA input terminal as appropriate.

3.3 Interface Connections

The multimeter supports various interfaces for remote control and data transfer:

  • USB Host: For connecting USB storage devices (front panel).
  • USB Device: For connecting to a PC (rear panel).
  • LAN (Ethernet): For network connectivity (rear panel).
  • GPIB: General Purpose Interface Bus for instrument control (rear panel).
  • RS-232: Serial communication interface (rear panel).

Connect the appropriate cables to the respective ports on the rear panel as needed for your application.

4. Operating Instructions

The multimeter features an intuitive front panel with dedicated function keys and a navigation cluster. Refer to Figure 1 and Figure 2 for key locations.

4.1 Basic Measurement Functions

Press the corresponding function key to select the desired measurement mode:

  • DCV (DC Voltage): Measures direct current voltage.
  • ACV (AC Voltage): Measures alternating current voltage (True RMS).
  • DCI (DC Current): Measures direct current.
  • ACI (AC Current): Measures alternating current (True RMS).
  • Ω (Resistance): Measures resistance.
  • Cap (Capacitance): Measures capacitance.
  • Freq (Frequency): Measures frequency.
  • Diode: Performs diode test.
  • Continuity: Checks for circuit continuity with an audible tone.
  • Sensor (Temperature): Supports various temperature sensors (Thermocouple, RTD).

4.2 Advanced Features

  • Double Display: Simultaneously displays two measurement results.
  • Preset Mode: Save and recall up to 10 groups of preset configurations.
  • Any Sensor Measurement: Supports 6 kinds of sensors (DCV, DCI, Freq, 2WR, 4WR, and TC).
  • Math Function: Analyze measurements using various math operations (e.g., Min/Max/Average, dBm, dB, Hold, Histogram, Standard deviation).
  • Statistic Function: Provides statistical analysis of measurement data.
  • Histogram Display: Visualizes data distribution over time.
  • Trend Display: Graphs measurement trends over a long duration.
  • LXI & Web Control: DM3058 is LXI Class C compliant, allowing web-based control and monitoring.
  • UltraSensor Software: Provides a user-friendly interface for sensor measurements, data management, and real-time monitoring.
RIGOL DM3068 Application Examples
Figure 5: Examples of Histogram and Trend Display functions for data analysis.
RIGOL DM3058/DM3058E Advanced Features
Figure 6: Visual representation of Double Display, Preset Mode, Any Sensor Measurement, LXI & Web Control, and UltraSensor Software Interface.
RIGOL DM3058/DM3058E Measurement Functions and Software
Figure 7: Overview of basic measurement functions, extended measurement ranges, real-time statistic analysis functions, LXI Certificate, and UltraSensor Software.

5. Maintenance

5.1 General Care and Cleaning

  • Keep the multimeter clean and dry. Use a soft, damp cloth for cleaning the exterior. Do not use abrasive cleaners or solvents.
  • Ensure no liquids enter the instrument.
  • Store the device in a clean, dust-free environment when not in use.

5.2 Fuse Replacement

The multimeter contains fuses to protect against overcurrent. If the instrument fails to power on or a current measurement range is inoperative, check the fuses.

  1. Power Fuse: Located on the rear panel, integrated with the AC power input module (refer to Figure 3). Ensure the instrument is disconnected from the power supply before attempting to replace.
  2. Current Input Fuses: A 200mA current input fuse is located on the rear panel. Internal fuses for 2A and 10A ranges are also present and may require professional service for replacement.

Always replace fuses with the specified type and rating to ensure proper protection and operation.

6. Troubleshooting

This section provides solutions to common issues. If the problem persists, contact RIGOL customer support.

Problem Possible Cause Solution
Instrument does not power on. Power cord not connected, power fuse blown, incorrect voltage setting. Check power cord connection. Verify voltage selector. Replace power fuse if blown (refer to Section 5.2).
No reading or incorrect reading in current mode. Test leads connected to wrong terminals, current input fuse blown. Ensure test leads are connected to the correct current input (A or mA) and COM terminals. Check and replace current input fuses (refer to Section 5.2).
Display shows "OL" (Overload). Input signal exceeds selected range, open circuit. Select a higher measurement range. Check for open circuits in the test setup.
Unstable or noisy readings. External noise interference, poor test lead connection. Ensure proper shielding. Use shorter test leads. Check for loose connections.

7. Specifications

7.1 General Specifications

RIGOL DM3068 General Specifications Table
Figure 8: General Specifications for DM3068, including Display, Power Supply, Power Consumption, Working Environment, Storage Temperature, Safety, EMC, Weight, Dimension, Remote Interface, Programming Language, LXI Compatibility, and Warm-up Time.
RIGOL DM3058/DM3058E General Specifications Table
Figure 9: General Specifications for DM3058/DM3058E, including Display, Power Supply, Power Consumption, Working Environment, Storage Temperature, Safety, EMC, Weight, Dimension, Remote Interface, Programming Language, LXI Compatibility, and Warm-up Time.

7.2 DC Characteristics

RIGOL DM3058 DM3068 DC Characteristics Table
Figure 10: Detailed DC Characteristics, including DC Voltage, DC Current, Resistance, and Diode Test/Continuity specifications.
RIGOL DM3058/DM3058E DC Characteristics Table
Figure 11: DC Characteristics for DM3058/DM3058E, including DC Voltage, DC Current, Resistance, and Diode Test/Continuity specifications.
RIGOL DM3058/DM3058E DC Characteristics (another table)
Figure 12: Additional DC Characteristics for DM3058/DM3058E, focusing on input resistance and protection.

7.3 AC Characteristics

RIGOL DM3058 DM3068 AC Characteristics Table
Figure 13: Detailed AC Characteristics, including True RMS AC Voltage and AC Current specifications across various frequency ranges.
RIGOL DM3058/DM3058E AC Characteristics and Frequency/Period Characteristics
Figure 14: AC Characteristics and Frequency and Period Characteristics for DM3058/DM3058E.
RIGOL DM3058/DM3058E AC Characteristics (detailed table)
Figure 15: Comprehensive AC Characteristics table for DM3058/DM3058E, including True RMS AC Voltage and Current.
RIGOL DM3058/DM3058E AC Characteristics (another table)
Figure 16: Further AC Characteristics for DM3058/DM3058E, including measurement method and input impedance.

7.4 Capacitance Characteristics

RIGOL DM3058 DM3068 Capacitance and Temperature Characteristics Tables
Figure 17: Capacitance Characteristics table, including ranges, test current, and accuracy. Also includes Temperature Characteristics for various probe types.
RIGOL DM3058/DM3058E Capacitance Characteristics and Other Measuring Characteristics
Figure 18: Capacitance Characteristics and Other Measuring Characteristics for DM3058/DM3058E, including triggering and memory.

7.5 Measurement Rate & Other Characteristics

RIGOL DM3058 DM3068 Measurement Rate and Other Measurement Characteristics Tables
Figure 19: Measurement Rate table for various functions and integration times. Also includes Other Measurement Characteristics such as Triggering and Storage, VMC Output, and History Record.

7.6 SFDR & SINAD

RIGOL DM3058 DM3068 SFDR & SINAD Table
Figure 20: SFDR (Spurious-Free Dynamic Range) and SINAD (Signal-to-Noise-and-Distortion) specifications for various functions and ranges.

8. User Tips

No specific user tips from reviews or Q&A were provided for this product. General best practices for digital multimeters include:

  • Always ensure the correct function and range are selected before making a measurement to prevent damage to the instrument or circuit.
  • When measuring current, always connect the multimeter in series with the load.
  • When measuring voltage, always connect the multimeter in parallel with the component.
  • For sensitive measurements, allow the instrument to warm up for the specified time (e.g., 30 minutes) to achieve optimal accuracy.

9. Warranty and Support

For warranty information, technical support, or service, please refer to the official RIGOL website or contact your local RIGOL distributor. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.