1. Introduction
The Lemorele TC96 is a versatile 13-in-1 USB-C docking station designed to expand the connectivity of your USB-C enabled devices, such as laptops and smartphones. This hub transforms a single USB-C port into a comprehensive workstation solution, providing a wide array of ports including dual HDMI, VGA, multiple USB 3.1 and USB 2.0 ports, USB-C Power Delivery (PD) charging, SD/TF card readers, a 3.5mm audio jack, and Gigabit Ethernet.

Figure 1: Lemorele TC96 13-in-1 USB-C Docking Station overview with labeled ports.
2. Key Features
- 13-in-1 Massive Expansion: Includes 2x HDMI, 1x VGA, 1x 3.5mm Audio, 1x USB-C PD 100W, 1x SD Card Reader, 1x TF Card Reader, 2x USB-A 2.0, 2x USB-A 3.1 (10Gbps), 1x USB-C 3.1 (10Gbps), and 1x RJ45 1000M Ethernet port.
- High-Speed Data Transfer: USB 3.1 ports support data transfer rates up to 10Gbps, enabling rapid file transfers.
- Power Delivery (PD) Charging: Equipped with a 100W USB-C PD charging port, allowing you to power your host device while using the hub (up to 85W output to host).
- Gigabit Ethernet: Provides a stable and fast 1000Mbps wired network connection, ideal for high-bandwidth activities.
- Dual Display Output: Supports up to two external displays via HDMI (4K@30Hz) and VGA.
- Plug-and-Play: No additional drivers or complex installation required for most operating systems.

Figure 2: Detailed port layout and specifications of the TC96 docking station.
3. Setup Instructions
- Connect the Hub to Your Device: Plug the integrated USB-C cable from the Lemorele TC96 docking station into an available USB-C port on your laptop, tablet, or smartphone. Ensure your device's USB-C port supports DisplayPort Alternate Mode (Alt Mode) for video output and Power Delivery for charging.
- Connect Power (Optional but Recommended): If you need to charge your host device or power high-consumption peripherals, connect your laptop's original USB-C power adapter to the USB-C PD port on the docking station.
- Connect External Displays:
- For HDMI displays, connect HDMI cables from your monitors to the HDMI ports on the hub.
- For VGA displays, connect a VGA cable from your monitor to the VGA port on the hub.
Your operating system should automatically detect the external displays. You may need to configure display settings (e.g., extend, mirror) in your device's display settings.
- Connect USB Peripherals: Plug your USB devices (e.g., keyboard, mouse, external hard drives, USB flash drives) into the available USB-A 3.1, USB-A 2.0, or USB-C 3.1 data ports on the hub.
- Connect to Network: For a stable wired internet connection, connect an RJ45 Ethernet cable from your router or modem to the RJ45 port on the hub.
- Insert Memory Cards: Insert SD or TF cards into the corresponding card reader slots for data access.
- Connect Audio Devices: Plug headphones or speakers into the 3.5mm audio jack for audio output.

Figure 3: Example setup of the TC96 docking station with a laptop and external devices.
4. Operating Instructions
4.1. Display Output
- The hub supports extending or mirroring your display to external monitors via the HDMI and VGA ports.
- For optimal 4K resolution, use the HDMI 2.0 ports. The maximum resolution supported is 4K@30Hz.
- To configure your display settings, navigate to your operating system's display settings (e.g., System Preferences > Displays on macOS, Settings > System > Display on Windows).
4.2. USB Data Transfer
- Utilize the USB-A 3.1 and USB-C 3.1 ports for high-speed data transfer up to 10Gbps. These are ideal for external SSDs, high-resolution cameras, or large file transfers.
- The USB-A 2.0 ports are suitable for connecting peripherals like keyboards, mice, and printers, offering stable connectivity without latency.

Figure 4: USB 3.1 Super-Speed data transfer capabilities.
4.3. Power Delivery
- Connect your laptop's power adapter to the USB-C PD port on the hub to provide up to 100W input power to the hub, which then delivers approximately 85W to your host device for charging.
- This allows you to charge your laptop and power all connected peripherals simultaneously through a single USB-C connection.

Figure 5: Power Delivery (PD) charging functionality.
4.4. Gigabit Ethernet
- The RJ45 port provides a reliable 10/100/1000Mbps Ethernet connection, offering superior stability and speed compared to Wi-Fi, especially for large downloads, online gaming, or video conferencing.

Figure 6: Gigabit Ethernet for high-speed network connection.
4.5. Card Readers & Audio
- The SD and TF card slots allow for quick access to photos and videos from your memory cards, with transfer speeds up to 20MB/s.
- The 3.5mm audio jack supports standard headphones or speakers for audio output.

Figure 7: TC96 hub connected to a smartphone, demonstrating versatility.

Figure 8: TC96 hub connected to a tablet with external keyboard and mouse.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the docking station. Avoid using liquid cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Do not drop, disassemble, or attempt to repair the device yourself. This may void the warranty and cause damage.
- Ventilation: Ensure the hub has adequate ventilation, especially during prolonged use, to prevent overheating.
6. Troubleshooting
- No Display Output:
- Ensure the USB-C cable from the hub is securely connected to your host device.
- Verify that your host device's USB-C port supports DisplayPort Alternate Mode (Alt Mode).
- Check that HDMI/VGA cables are properly connected to both the hub and the monitors.
- Try restarting your host device or reconnecting the hub.
- Ensure your monitor is set to the correct input source (HDMI/VGA).
- USB Devices Not Recognized:
- Reconnect the USB device to a different port on the hub.
- Ensure the hub is receiving sufficient power, especially if multiple power-hungry devices are connected. Connect an external power adapter to the hub's PD port.
- Check your host device's Device Manager (Windows) or System Information (macOS) to see if the USB device is detected.
- Slow Data Transfer Speeds:
- Ensure you are using the USB 3.1 ports for high-speed devices. USB 2.0 ports have lower speeds.
- Verify that your connected USB device itself supports USB 3.1 speeds.
- Avoid connecting too many high-bandwidth devices simultaneously if the hub is not externally powered.
- Charging Issues:
- Ensure your power adapter is connected to the hub's USB-C PD port, not a data port.
- Verify that your power adapter provides sufficient wattage (e.g., 65W or 100W) for your laptop.
- Some laptops may require their original charger for optimal charging.
- Ethernet Not Working:
- Check the RJ45 Ethernet cable connection at both the hub and your router/modem.
- Ensure Ethernet drivers are installed and up-to-date on your host device.
- Verify that your network settings are correctly configured on your host device.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Lemorele |
| Model | TC96 |
| Interface Type | USB Type-C |
| Standard | USB 3.1 |
| Ports | 13 |
| Functions | HDMI-Compatible, Card Reader, RJ45, VGA, Audio, USB-C PD |
| HDMI Output | 2x 4K@30Hz |
| VGA Output | 1x |
| USB-A 3.1 Data Ports | 2x (10Gbps) |
| USB-C 3.1 Data Port | 1x (10Gbps) |
| USB-A 2.0 Data Ports | 2x (485Mbps) |
| USB-C PD Charging | 1x (100W Input, ~85W Output) |
| Card Reader | 1x SD, 1x TF (20MB/s) |
| Ethernet | 1x RJ45 (10/100/1000Mbps) |
| Audio Jack | 1x 3.5mm |
| Certification | CE |
| Package | Yes |
| Origin | Mainland China |
8. User Tips
- Host Device Compatibility: For optimal performance, ensure your laptop's USB-C port supports Power Delivery and DisplayPort Alt Mode. Not all USB-C ports have these capabilities.
- Power for Stability: When using multiple high-bandwidth devices (e.g., dual 4K monitors, multiple USB 3.1 devices, and charging), connecting an external power adapter to the hub's USB-C PD port is highly recommended for stable operation and to prevent power fluctuations.
- Driver Updates: Keep the firmware for your laptop and any relevant drivers (e.g., graphics, USB-C controller) updated to ensure the best compatibility and performance with the docking station.
- Cable Quality: Use high-quality HDMI, VGA, and Ethernet cables to ensure reliable connections and optimal signal integrity, especially for 4K video output.
9. Warranty and Support
For warranty information, technical assistance, and customer support, please refer to the manufacturer's official website or contact your retailer. It is advisable to retain your proof of purchase for any warranty claims or service requests.