fortress Chery Tiggo 5 Car Radio

Contents

Android 16 Car Radio Multimedia System User Manual

Model: Chery Tiggo 5 Car Radio | Brand: fortress

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your new Android 16 Car Radio Multimedia System, designed specifically for Chery Tiggo 5 models from 2014 to 2020. Please read this manual thoroughly before using the product to ensure proper function and safety.

Android 16 Car Radio installed in a Chery Tiggo 5 dashboard, displaying a multimedia interface.

Figure 1: Android 16 Car Radio installed in a Chery Tiggo 5 dashboard.

2. Safety Information

  • Always ensure the vehicle is parked safely before operating the multimedia system.
  • Do not attempt to install or service the unit yourself if you are not professionally trained. Incorrect installation can lead to damage or injury.
  • Keep the volume at a safe level to remain aware of road conditions and traffic.
  • Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or moisture.
  • Use only approved accessories and cables.

3. Package Contents

Please check the contents of your package against the list below:

  • 1 x Android Radio Unit
  • 1 x Framework (for Chery Tiggo 5 2014-2018)
  • 1 x Plug and Play Power Cord
  • 1 x GPS Antenna
  • 1 x RCA Cable
  • 1 x AHD Reverse Camera (Gift)
  • 1 x Reverse Video Input Cable
  • 2 x USB Cables
  • 1 x Microphone
  • 1 x Installation Rocker Panel
  • 1 x DVR Camera (Optional, if purchased)
Image showing the Android Car Radio unit, a 1080P AHD Camera, a microphone, and installation tools.

Figure 2: Included accessories: Android Car Radio, 1080P AHD Camera, Microphone, and tools.

4. Setup and Installation

4.1 Pre-Installation Checks

  • Verify your original car radio's size and appearance to ensure compatibility with this unit.
  • Confirm your Chery Tiggo 5 model year is between 2014 and 2020.
  • Note that additional adapters may be required for installation, which are not included unless specified in the accessories list.

4.2 Professional Installation Recommendation

Professional installation is highly recommended. A car maintenance store is the best choice for installation to ensure correct wiring and functionality. This manual does not include detailed installation instructions beyond the rear camera guide.

Comparison image showing the car dashboard before and after installation of the Android Car Radio, highlighting the larger screen.

Figure 3: Before and After Installation of the Android Car Radio in a Chery Tiggo 5 dashboard.

4.3 Wiring Diagram

Refer to the following diagram for connecting the main unit and its accessories:

Wiring diagram for the Android Car Radio showing connections for radio antenna, GPS antenna, RCA, Canbus, USB, and camera signal.

Figure 4: Main Unit Wiring Diagram. Connect the radio antenna, GPS antenna, RCA cables, Canbus, USB cables (4-pin and 6-pin), and camera signal (with +12V and GND for reversing lights).

Note: Cables 1 and 2 (WIFI Antenna and BT Signal Amplifier) must be connected together. It's not just a cable for the camera but also for the WIFI antenna.

5. Operating Instructions

5.1 Basic Functions

  • Operating System: Android 16
  • Memory: Available in 4GB/8GB/12GB RAM and 32GB/64GB/128GB ROM configurations.
  • Connectivity: Built-in WIFI (4G network optional for 8+128/12+128 configurations).
  • Audio: RDS/DSP support (DSP 48EQ for L4/L5, 16EQ for L2/L3).
  • Control: Mirror link, steering wheel control.

5.2 CarPlay / Android Auto

The unit supports both wireless and wired Apple CarPlay and Android Auto. This allows seamless integration of your smartphone for navigation, music, calls, and voice commands.

Screenshot of the car radio display showing Apple CarPlay and Android Auto interfaces side-by-side.

Figure 5: CarPlay and Android Auto interfaces.

Connection Steps (TLink/ZLink):

  1. Turn on the Bluetooth app on the radio.
  2. Connect your phone to the radio via Bluetooth successfully.
  3. Turn on the TLink app on the radio.
  4. The radio will enter the CarPlay/Android Auto connection state.
Diagram illustrating the TLink/ZLink connection process for CarPlay/Android Auto with a smartphone and the car radio.

Figure 6: TLink/ZLink connection steps for CarPlay/Android Auto.

5.3 Voice Control

The system supports voice assistant features, allowing you to make calls, play music, control navigation, and more using voice commands, enhancing driving safety.

5.4 Rear View Camera

The unit supports rear view camera input. When reversing, the video feed from the rear camera will automatically display on the screen, assisting with parking and maneuvering.

Car radio screen displaying a rear view camera feed with parking guidelines.

Figure 7: Rear View Camera display.

5.5 GPS Navigation

The built-in GPS navigation system can locate your position in real-time. With a WIFI connection, you can use online navigation services and download various map applications.

Car radio screen showing a GPS navigation map with various navigation app icons.

Figure 8: GPS Navigation interface.

5.6 Split Screen Display

The split-screen function allows you to run two applications simultaneously. For example, you can view navigation on one side and control music on the other.

Car radio screen showing a split display with navigation on one side and settings on the other.

Figure 9: Split Screen Display example.

5.7 Steering Wheel Control

The unit supports the steering wheel button functions of your original car. This allows you to quickly switch functions without taking your hands off the steering wheel.

Car radio screen showing the steering wheel control settings interface, allowing customization of button functions.

Figure 10: Steering Wheel Control settings.

5.8 DSP & EQ Settings

The built-in Digital Sound Processor (DSP) with 48EQ (for L4/L5 configurations, 16EQ for L2/L3) provides a panoramic stereo hearing experience, allowing you to customize sound effects and achieve optimal audio quality.

Car radio screen displaying the DSP and EQ settings interface with various sound adjustments.

Figure 11: Built-in DSP 48 EQ interface.

5.9 Bluetooth Function

Enjoy wireless music streaming, hands-free calling, and navigation through the built-in Bluetooth module.

Car radio screen showing Bluetooth functions: BT Phone, Bluetooth connection, and BT Music streaming.

Figure 12: Bluetooth functions.

5.10 Radio (RDS/FM/AM)

The unit supports RDS/FM radio (L2/L3 configurations) and RDS/FM/AM radio (L4/L5 configurations). You can transfer online music to the car stereo via FM to enjoy the original car stereo sound, with 18 preset stations.

Car radio screen displaying the RDS radio interface with frequency tuning and preset stations.

Figure 13: RDS Radio Function display.

5.11 User Interface (UI)

The radio comes with 26 different themed UI options built-in, allowing you to personalize the look and feel of your multimedia system.

Multiple screenshots of different UI themes available on the car radio.

Figure 14: Various UI themes.

5.12 DVR Front Tachograph (Optional)

If equipped, the DVR (Digital Video Recorder) is installed on the front windshield to record external conditions in front of the car. Recordings are stored on a memory card and can be viewed or copied from the multimedia unit.

Image describing the Traffic Recorder Function (DVR) with features like auto video, collision induction, wide angle photography, HD screen, mobile detection, and cyclic video.

Figure 15: Traffic Recorder Function (DVR).

5.13 DAB+ (Optional)

DAB+ (Digital Audio Broadcasting Plus) offers CD-like quality sound and more robust signal reception compared to FM. It supports a wider variety of stations. A DAB+ box is required and can be purchased separately.

Diagram showing a DAB+ Box connection and a comparison table between DAB+ and FM radio.

Figure 16: DAB+ Box and DAB+ vs. FM comparison.

5.14 OBD2 (Optional)

The unit supports Torque Pro (OBD2 & Car) functionality. You can connect an ELM327 Bluetooth OBD2 Scanner Tool (not included) to use this feature for vehicle diagnostics.

Image showing an ELM327 Bluetooth OBD2 Scanner Tool and screenshots of the Torque Pro app interface on the car radio.

Figure 17: Support for Torque Pro (OBD2 & Car).

5.15 Multi-Language Support

The system supports up to 40 national languages, allowing users from various regions to operate the device comfortably.

Screenshot of the car radio displaying a list of supported languages.

Figure 18: Multi-language support list.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the screen and unit. Avoid abrasive cleaners or solvents.
  • Software Updates: Periodically check for software updates through the system settings to ensure optimal performance and access to new features.
  • Screen Care: The unit features a QLED screen. Avoid pressing too hard on the screen. For optional 2K screens, they offer higher resolution and picture restoration.
  • Capacitive Touch Screen: The unit uses a capacitive touch screen, which is multi-touch and sensitive, offering anti-glare properties and high transmittance for clear visibility.
Comparison between IPS Screen and Normal Screen, showing better viewing angles for IPS.

Figure 19: IPS Screen vs. Normal Screen comparison.

Image showing 2K screen resolution options (1280*720 vs 2000*1200) and describing its high-quality visual experience.

Figure 20: 2K Screen Resolution (Optional).

Comparison between Resistive Screen and Capacitive Screen, highlighting the multi-touch and sensitive nature of capacitive screens with anti-glare properties.

Figure 21: Resistive Screen vs. Capacitive Screen.

7. Troubleshooting

  • No Power: Check all power connections and fuses. Ensure the unit is properly installed and receiving power from the vehicle.
  • No Sound: Verify speaker connections. Check volume levels and EQ settings. Ensure no audio source is muted.
  • GPS Signal Loss: Ensure the GPS antenna is correctly installed and has a clear view of the sky. Check network connectivity for online maps.
  • Bluetooth Connection Issues: Ensure Bluetooth is enabled on both the unit and your phone. Try unpairing and re-pairing the devices.
  • CarPlay/Android Auto Not Connecting: Ensure the TLink/ZLink app is running. Check USB cable connection for wired connections. Verify phone compatibility.
  • Rear Camera Not Displaying: Check the camera's power and video signal connections. Ensure the reverse gear is engaged.
  • Steering Wheel Controls Not Working: Re-enter the steering wheel control learning interface and re-map the buttons.

8. Specifications

FeatureSpecification
SystemAndroid 16
RAM6G (Optional: 4G, 8G, 12G)
ROM128G (Optional: 32G, 64G)
Max External Memory256G
Chipset8 Core
Processor Speed2.2hz
Processor TypeMTK 8227
Display Size9"
Resolution1280*720 / 2000*1200 (Optional)
Touch ScreenYes
Built-in ScreenYes
DinDouble Din
InterfacePlug and play
Out Power4*50W
Voltage12 V
Item Weight1.7kg
Special FeaturesBuilt-In Speaker/Microphone, WiFi function, Support 3G/4G Network, Support Can-Bus, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control
Digital Media FormatMp3, MP4, WMA, JPEG
OSD LanguageMulti-language support (up to 40 countries)
Tuner TypeFM (RDS for L2/L3, RDS FM AM for L4/L5)
Preset Station18
Built-in DVD PlayerNo
Built-in CD playerNo
CertificationCE, FCC
Subwoofer OutputSupport
AV-OUTWiFi version support, 4G version not support
RCA Cable7 channels including subwoofer cab
Screen DisplayHD 9/10 inch 2.5D screen, HD1280*720/2000*1200
Rear view camera inputSupport (Free Gift)
INPUT Interface2*USB RCA Bluetooth
WIFIBuilt-in
Mobile phone connectionWireless Carplay/Wireless Android Auto (optional)
MicrophoneIphone & Android, Built-in external microphone
GPS Navigation mapGoogle Maps Online
Bluetooth phone bookOptional
Bluetooth musicSupport

Table 1: Product Specifications.

Detailed specifications table for different configurations of the car radio, including OS, RAM/ROM, CPU, Resolution, Cooling Fan, Screen, DSP, Internet, SIM Card Slot, Bluetooth, GPS, Optic-Output, Radio, SWC, DVR, Video Out, Amplifiteric, Carplay, Android Auto, Plug and Play, and Adapters.

Figure 22: Detailed Specifications for various configurations.

9. User Tips

  • For optimal performance, ensure your unit's software is always up to date.
  • If experiencing slow performance, try closing unused applications running in the background.
  • Utilize the split-screen feature for multitasking, such as navigation and music playback simultaneously.
  • Consider optional accessories like a DVR or DAB+ for enhanced functionality.

10. Warranty and Support

All products undergo strict quality tests before shipment. If the product has a problem within 365 days after receipt confirmation, please contact customer service first. We will assist you in fixing the issue or arranging a replacement.

Customer Service: Available 24 hours. Please contact us via the order chat for assistance.

© 2024 fortress. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.