Bykski N-GV5080GMOC-X-V2

Contents

Bykski GPU Water Block User Manual

Model: N-GV5080GMOC-X-V2

1. Product Introduction

This Bykski GPU Water Block (Model: N-GV5080GMOC-X-V2) is designed for high-performance PC thermal management, specifically for compatible GIGABYTE RTX 5080 series graphics cards. It is compatible with standard G1/4" thread fittings, allowing integration into custom liquid cooling loops.

Compatibility:

  • GIGABYTE RTX 5080 Gaming OC 16G
  • GIGABYTE GeForce RTX 5080 WindForce OC 16G

Note:

  • Before purchasing, ensure your graphics card is on the compatibility list and its PCB matches the displayed PCB layout. If unsure, provide a PCB picture for confirmation.
  • Stock backplates are not guaranteed to fit due to potential mounting variances.

Key Features:

  • Material: T2 copper base plate for high-efficiency thermal conductivity.
  • Micro-Waterways: Features 0.3mm jet micro-waterways to increase the endothermic area, providing powerful heat dissipation. The design includes as many as 56 waterways, increasing the total waterway area to 6871.6 mm².
  • Extended Copper Plate: The copper plate length is extended to 120.83mm to maximize water flow coverage.
  • Lightweight Design: Engineered to reduce the overall weight of the water block, protecting the PCB from potential deformation.
  • RGB Support: A-RGB lighting with 5V3Pin ARGB compatibility, offering two lighting modes for customizable aesthetics.

Product Overview Video: Demonstrates the design and features of the Bykski GPU Water Block.

2. Package Contents

The package includes the following items:

  • Water Block x 1
  • Backplate x 1
  • Sync Motherboard light strip x 1
  • Thermal Paste x 1 Set
  • Water Plug x 2
  • Mount Screws, Nut, Spring x 1 Set
List of installation parts for Bykski GPU water block

Diagram: List of installation parts including the water block, backplate, screws, and thermal pads.

3. Setup and Installation

Follow these steps carefully to install your GPU water block:

  1. Initial Inspection: Inspect the product for any physical damage before installation.
  2. Prepare GPU: Remove the original cooler/radiator from your graphics card. Clean any old thermal paste or pads from the GPU die and memory chips.
  3. Apply Thermal Material: Apply thermal paste to the GPU core and place thermal pads on the memory modules and VRMs as indicated in the diagrams.
  4. Install Water Block: Carefully align the water block with the GPU PCB. Ensure all mounting holes are aligned.
  5. Secure Water Block: Fix the water block to the graphics card using the provided screws. Tighten screws evenly in a cross pattern to ensure even pressure.
  6. Install Backplate (if applicable): If using the included backplate, align it with the back of the PCB and secure it with the appropriate screws.
  7. Install Fittings: Install the appropriate G1/4" fittings into the water block and ensure O-rings are securely in place to prevent leaks.
  8. Mount in Chassis: Secure the graphics card with the installed water block to the designated PC chassis or hardware mount.
  9. Connect RGB (Optional): Connect the 5V3Pin ARGB cable to a compatible motherboard header or RGB controller for lighting synchronization.
  10. Crucial Leak Test: Before turning on the entire PC system, conduct a 24-hour leak test. Power only the pump (using a jump-start bridge) and circulate coolant through the loop to check for any leaks. Address any leaks immediately before proceeding.
GeForce RTX 5080 PCB diagram

Diagram: GeForce RTX 5080 PCB layout, showing areas for thermal contact.

Installation step 1: Remove original radiator and apply thermal paste/pads

Installation Step 1: Remove the original radiator and apply thermal paste/pads. This image shows the GPU board with thermal pads placed on various components.

Installation step 2: Fix the cold head and back plate

Installation Step 2: Fix the cold head and back plate. This image illustrates the placement of the water block and backplate, indicating screw columns and thermal pads.

Detailed thermal pad placement for GPU water block

Detailed Thermal Pad Placement: Shows specific areas for thermal pad application on the GPU PCB.

GPU water block installation diagram with screw points

GPU Water Block Installation Diagram: Illustrates the mounting points and screw locations for securing the water block.

GPU water block installation diagram with screw points and thermal pads

GPU Water Block Installation Diagram: Further detail on screw points and thermal pad placement during installation.

GPU water block installation diagram with screw points and thermal pads

GPU Water Block Installation Diagram: Another view of the installation process, highlighting screw locations.

GPU water block installation diagram with screw points and thermal pads

GPU Water Block Installation Diagram: Final view of the installation process, showing all components in place.

4. Operating Instructions

Coolant Usage:

  • Do not mix aluminum and copper components in the same liquid cooling loop to avoid galvanic corrosion, which can damage your system.
  • Use only specialized PC coolants designed for liquid cooling systems.

RGB Lighting:

The water block supports A-RGB lighting with a 5V3Pin ARGB connection. This allows for synchronization with compatible motherboards or controllers to customize lighting effects and colors, creating a dynamic visual experience for your PC.

Rhythm of Light and Shadow RGB lighting modes

Image: Demonstrates the RGB lighting effects, highlighting the 'Rhythm of Light and Shadow' feature with 12V RGB & 5V (A-RGB) lighting modes.

5. Maintenance & Storage

Maintenance:

  • Loop Flushing: Flush the liquid cooling loop every 6-12 months to prevent sediment buildup and maintain optimal performance.

Storage:

  • Store the water block in a cool, dry place when not in use.
  • Avoid direct sunlight exposure on acrylic parts to prevent cracking or discoloration.

6. Warning & Safety Information

IMPORTANT! WARNING / SAFETY INFORMATION

  • LEAKAGE RISK: Improper installation may cause coolant leakage, leading to permanent damage to electronic components. Always perform a pressure or leak test before full system power-on.
  • ELECTRICAL SAFETY: Ensure all RGB/D-RGB cables are connected to the correct voltage headers (e.g., 5V vs 12V). Wrong connections can cause short circuits or fire.
  • CHEMICAL SAFETY: Keep coolants out of reach of children. If ingested, seek medical attention immediately.
  • CHOKING HAZARD: This product contains small parts (screws, fittings). Keep away from children under 3 years old.

7. Specifications

Attribute Value
Brand Name Bykski
Model Number N-GV5080GMOC-X-V2
Type VGA Front Water Block, GPU Water Cooler
RGB Support A-RGB (5V3Pin ARGB)
Material Acrylic + Copper + Aluminum
Screw Thread G1/4"
Compatible GPUs GIGABYTE RTX 5080 Gaming OC 16G, GIGABYTE GeForce RTX 5080 WindForce OC 16G
Origin Mainland China
Package Dimensions (L x W x H) 30 cm x 20 cm x 8 cm
Package Weight 1.65 kg
Product dimensions diagram

Diagram: Product dimensions in millimeters. Overall dimensions (with backplate) are approximately 228.93mm x 125.65mm x 33.80mm. Without backplate, the thickness is 25.45mm.

8. Compliance & Certifications

This product complies with international safety and environmental standards:

  • Compliance Mark: CE (Conformité Européenne) / RoHS
  • Standards: Built in accordance with EU Directive 2011/65/EU and its amendment directives on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

9. User Tips

No specific user tips were available from the provided data.

10. Frequently Asked Questions (FAQ)

No specific FAQ content was available from the provided data.

11. Warranty and Support

For warranty information and technical support, please refer to the official Bykski website or contact your retailer. Keep your proof of purchase for any warranty claims.

© 2023 Bykski. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.