WELLMEET WM-SP668E

Contents

SP668E SPI RGB LED Controller User Manual

Model: WM-SP668E | Brand: WELLMEET

1. Introduction

The SP668E SPI RGB LED Controller is a versatile device designed to manage and customize LED lighting effects. It supports both mobile application control via Bluetooth and a dedicated 2.4G RF remote control. The intuitive visual user interface (UI) of the app allows for powerful customization, dynamic effects, and personalized scene collection, providing a tailored lighting atmosphere for any setting.

2. Product Features

  • Dual Control Methods: Supports both App control (via Bluetooth) and 2.4G RF remote control for convenience.
  • Visual UI Design: Features a brand-new scene-based App UI with visualized lighting effect previews for a unique visual experience.
  • Dynamic Effects: Includes highly creative dynamic effects, versatile DIY options, and lively music effects.
  • Personalized Scene Collection: Allows users to create and save personalized scene collections, supports loop playback, and enables setting custom playback times.
  • Multi-Device Management: Supports multi-device group management and automatic device reconnection for seamless control.
  • OTA Updates: Ensures your device stays updated with the latest features and improvements.
  • Timed Power ON/OFF: Supports scheduled power on and off functions.

3. Specifications

Controller Parameters

Parameter Value Parameter Value
Working Voltage DC5V-24V Data Type SPI
Working Current 14mA~20mA IC Type Single-wire RZ RGB LED driver IC
Working Temp -10℃~60℃ MAX Pixels 600
Dimension 56mm×21mm×12mm (Not including the wires) Material Plastic
Wattage 600 PIXEL Power Source DC
Max. Load Power 600 PIXEL Applicable Lights LED SPI RGB
Certification CE, ROHS Connection Mode APP/2.4G

Remote Control Parameters

Parameter Value Parameter Value
Working Voltage 3V (CR2025) Static Current 4uA
Transport 2.4G Remote Distance <30M (Open space)
Dimension 103mm×45mm×8.5mm Controled Method APP/2.4G

Note: Dimensions for the controller do not include the wires.

4. Installation Precautions

Please read and adhere to the following precautions to ensure safe and proper installation:

  1. This product should be debugged and installed by personnel with professional qualifications.
  2. This product is not waterproof. It needs to be protected from direct sunlight and rain. If installed outdoors, please use a waterproof enclosure.
  3. Good heat dissipation conditions are crucial for extending the service life of LED controllers. Install the product in a well-ventilated environment.
  4. Do not install or use this product in areas with lightning, strong magnetic fields, or high voltage.
  5. Always check that the output voltage of the LED power supply used meets the specified voltage range of the product (DC5V-24V).
  6. The diameter and size of the wires used must be sufficient to handle the load of the connected LED lighting fixtures. Ensure that the wiring is secure to prevent accidents triggered by heat or poor contact.
  7. Before powering on and debugging, it is essential to ensure that all wiring is correct to avoid damage to the lighting fixtures due to wiring errors.
Installation Precautions for SP668E LED Controller
Image: Detailed list of installation precautions.

5. Wiring Instructions

Proper wiring is critical for the functionality and safety of your LED lighting system. Follow the diagram below to connect the SP668E controller to your LED light strip and power supply.

Wiring Diagram for SP668E LED Controller
Image: Wiring diagram showing connections between DC power, SP668E controller, and LED light strip (GND, DAT, VCC).
  • Connect the DC power supply (5-24V) to the input port of the SP668E controller.
  • Connect the output terminals of the SP668E controller (GND, DAT, VCC) to the corresponding input terminals of your LED light strip.
  • Ensure all connections are secure and correctly polarized (VCC to VCC, GND to GND, DAT to DAT).

6. Operation

6.1. App Operation (BanlanX App)

The SP668E controller can be controlled via the BanlanX App, available for iOS and Android devices.

  • App Compatibility: Requires iOS 10.0 or higher, and Android devices require Android 4.4 or higher.
  • Download: Search for "BanlanX" in the App Store or Google Play, or scan the QR code provided on the product packaging/manual to download and install.
BanlanX App QR code and features
Image: Overview of SP668E features and BanlanX App download information.

Getting Started with the App:

  1. Register and Login: Click the "Sign up" option in the upper right corner of the page. Fill in the required information to complete registration, then log in. You can also enter Guest Mode for limited features.
  2. Add Device: After successful registration, click "Add device" or the "+" icon. The app will search for available devices. Select your SP668E controller from the list to finish adding it.
  3. Color Correction: Click the color correction icon (usually in the upper right corner of the control interface). Select the corresponding color button based on the actual color displayed by your LED strip. Correction is completed once matched. Note: Due to differences in LEDs, if the UI color does not match the actual light, calibration is required.

Controlling Lighting Effects via App:

App operation interface for SP668E controller
Image: Screenshots illustrating app registration, device adding, color correction, and lighting effect controls.
  • Dynamic Effects: Click the effect icons at the bottom of the app interface to choose from up to 30 different dynamic lighting effects.
  • Music Effects: Select the music effects tab and click icons like "Spectrum," "Mars," "Energy," "Pulse," "Ignition," or "Meteor." You can adjust sensitivity and brightness for these effects.
  • DIY Effects: Access the DIY effects tab to create custom lighting patterns. There are up to 13 DIY effects available. You can toggle between solid and gradient colors, adjust speed, and set the effect direction.
  • Favorites: To save a current effect, click the heart icon at the top right of the effect screen. Long press on a saved effect to manage it. You can also enable loop playback and adjust the loop playback interval (e.g., 10s).

6.2. 2.4G RF Remote Control Operation

The SP668E controller is compatible with the included 2.4G RF remote control (RF3 model).

  • Control Modes: Supports one-to-many control (one remote can control multiple controllers) and many-to-one control (one controller can bind up to 5 remotes).
2.4G RF Remote Control layout and functions
Image: Diagram of the 2.4G RF remote control with button functions labeled.

Remote Button Functions:

  • ON/OFF: Short press to turn the light on or off.
  • Binding/Unbinding: Long press the ON button within 20 seconds after the controller is powered on to bind/unbind the remote control. If the remote is not bound, the white light will breathe 3 times. If the remote is successfully bound, the white light will breathe 3 times. If more than 5 remotes are bound, the light will not respond.
  • Brightness +/-: Adjust the brightness level of the lights.
  • Speed +/-: Adjust the speed of dynamic effects.
  • Mode +/-: Cycle through different lighting modes.
  • Music Mode: Activates music synchronization mode.
  • Collected Effect Cycle: Cycles through your saved favorite effects.
  • Timed Lights Off: Short press repeatedly to set a timer for turning off the lights (e.g., 30 minutes, 60 minutes, 90 minutes).
  • Color Buttons (White, Yellow, Cyan, Red, Green, Blue, Pink, Orange, Purple): Directly select static colors.

Remote Control Warnings:

  • Ensure the batteries are installed correctly according to polarity (+ and -).
  • Remove and immediately recycle or dispose of batteries from the product after an extended period of time, according to local regulations.
  • Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

7. User Tips

  • Power Supply Matching: Always ensure your power supply voltage matches the controller's requirements (DC5V-24V) to prevent damage.
  • App Connectivity: If you experience issues connecting the app, ensure Bluetooth is enabled on your device and the controller is powered on and within range. Try restarting both the app and the controller.
  • Remote Binding: When binding the remote, make sure to perform the long press of the ON button within 20 seconds of powering on the controller for successful pairing.
  • Heat Management: For optimal performance and longevity, ensure the controller is installed in a well-ventilated area to prevent overheating.

8. Troubleshooting

  • No Light Output:
    • Check all wiring connections (VCC, GND, DAT) for correct polarity and secure contact.
    • Verify the power supply is providing the correct voltage (DC5V-24V) and is functioning.
    • Ensure the LED strip itself is functional.
  • Incorrect Colors/Effects:
    • Perform color correction through the BanlanX App as described in the operation section.
    • Check if the correct IC type is selected in the app settings if applicable (though this controller is for single-wire RZ RGB LED driver ICs).
  • Remote Control Not Responding:
    • Check the remote control battery (CR2025) and ensure it's installed correctly.
    • Re-bind the remote control to the controller by long-pressing the ON button within 20 seconds of powering on the controller.
    • Ensure there are no more than 5 remotes already bound to the controller.
  • App Connectivity Issues:
    • Ensure Bluetooth is enabled on your mobile device.
    • Restart the BanlanX App and the SP668E controller.
    • Ensure your mobile device meets the minimum OS requirements (iOS 10.0+, Android 4.4+).
  • Factory Reset: To hard reset the controller to factory settings, plug and unplug the power supply 5 times consecutively. Each power-on cycle should last less than 2 seconds before turning off.

9. Maintenance

To ensure the longevity and optimal performance of your SP668E LED Controller, follow these simple maintenance guidelines:

  • Keep Clean: Regularly wipe the controller with a dry, soft cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
  • Keep Dry: As the product is not waterproof, ensure it is kept in a dry environment, away from moisture and humidity.
  • Ventilation: Maintain good ventilation around the controller to prevent overheating, especially during prolonged use.
  • Cable Integrity: Periodically inspect all connected cables for any signs of wear, damage, or loose connections.

10. Warranty and Support

WELLMEET LED controller products come with lifelong technical support and warranty services.

Free Warranty

If any quality issues occur within two years from the date of purchase, our company will provide free repair or service replacement.

Paid Warranty

Products that exceed the free warranty period will be subject to a charge for repair materials and services.

Situations Not Covered by Free Warranty or Replacement Services:

  • Damage caused by excessive voltage, overload, or improper operation.
  • Wiring errors, water immersion (for non-waterproof products), and unauthorized repairs.
  • Serious damage or deformation to the appearance caused by transportation or knocking.
  • Product appearance that is severely damaged or deformed.
  • Damage caused by natural disasters and uncontrollable human factors, such as earthquakes, floods, or fires.

Our company's maximum responsibility for factory products is to replace them with products of the same model and quantity.

To expedite the repair or replacement process, please provide a detailed description of the fault phenomenon, the operating environment, and any actions taken to resolve the issue. The customer is responsible for the logistics cost of returning the product and initial accessories for warranty service.

After-Sales Service details and warranty information
Image: Summary of after-sales service and warranty terms.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.