1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Bonroad Wireless Carplay Android Auto Interface. This device is designed to integrate Apple CarPlay and Android Auto functionalities into compatible Mercedes Benz vehicles equipped with the NTG 4.5 system and a Becker slot.
The interface allows for seamless integration of smartphone features such as navigation, music, hands-free calling, and voice control directly onto your car's display, enhancing your driving experience with modern connectivity.
2. Compatibility
Before installation, please ensure your vehicle meets the following requirements:
- Car System: Mercedes Benz NTG 4.5 system.
- Becker Slot: Your car must have a Becker slot.
To verify your car system, check your car's audio system display for "NTG 4.5/4.7 System" and locate the Becker slot, typically found in the glove compartment or under the passenger seat.

Compatible Car Models:
This interface is compatible with Mercedes Benz NTG 4.5 System vehicles with a Becker slot, including but not limited to:
- 2012-2015 GLK-Class
- 2013+ Sprinter
- 2014+ Vito
- 2012-2015 A-Class
- 2012-2014 CLS-Class
- 2011-2015 ML-Class
- 2013-2015 VW Crafter etc.
- 2011-2014 B-Class
- 2011-2015 E-Class
- 2011-2016 SLK-Class
- 2013-2014 CLA-Class
- 2011-2015 C-Class
- 2012-2016 GL-Class

3. Setup and Installation
3.1 Product List
The product package typically includes:
- Intelligent Box (Wireless Carplay Android Auto Interface)
- Wire Harness

3.2 Installation Process (Plug and Play)
The Bonroad interface is designed for easy installation. Simply insert the intelligent box into the designated Becker slot in your vehicle. No complex wiring is typically required for basic functionality, making it a "Plug and Play" solution.

3.3 Connection Diagram
For full functionality, including reversing camera input and power, connect the wire harness as follows:
- USB Expansion: Connect to your mobile phone for data transfer or a USB disk for media playback. This port also supports software upgrades.
- Original Car AUX: Connect to the original car's AUX input for audio output.
- Reversing Video Input: Connect your aftermarket reversing camera here.
- 12V+ ACC: Connect to a 12V Accessory power source in your vehicle.
Note on Dials: The intelligent box may feature small dials. Dial 1 is used to turn on/off the audio Bluetooth. Dial 2 is typically invalid or not used for this model.

4. Operating Instructions
4.1 Core Functions
- CarPlay / Android Auto: Supports both wireless and wired connections. Utilize your car's central control knob and buttons for navigation, music, phone calls, and voice commands (Siri/Google Assistant).
- Mirroring: Enjoy wired and wireless screen mirroring for both iPhone (AirPlay) and Android phones (Autolink).
- USB Media Playback: Directly insert a USB disk to play video and audio media.
- Hands-Free Calling: Make and receive calls directly from your car's screen for safer driving.
- Navigation Maps: Supports popular navigation apps like Google Maps, Waze Map, and Apple Map on your car's display.
- Reversing Video Input: Compatible with aftermarket rear cameras for enhanced safety.





4.2 Control Key Operation
The interface supports certain original car controls:
- Voice Button: Activates voice commands (e.g., Siri).
- Telephone Button: Used to answer or end calls.
- Volume "+", "-": Adjusts audio volume.
- Knob Operation: Long press for 2 seconds to skip to the previous or next song.
Other original car buttons may not be supported by the interface.

4.3 Bluetooth Audio Connection
To connect your phone via Bluetooth for audio:
- Open the Bluetooth audio of the original car host and select "Connect via BT audio device".
- Your car system will prompt "Ready for Bluetooth connection". On your phone, search for "MB Bluetooth".
- A connection request will pop up. Click "YES" to authorize "BT-Transmitter".
- A pairing request with a passkey (e.g., 234089) will appear. Confirm the passkey matches on both devices and click "YES".
4.4 Wireless CarPlay Connection
For wireless CarPlay functionality:
- On your car's display, select the Bluetooth option.
- Check for a Bluetooth device name starting with "CAR-BT-xxx" in the "Bluetooth" system interface.
- On your iPhone, turn on Wi-Fi and keep it active. Go to your phone's Bluetooth settings and select "CAR-BT-xxx" to connect.
- A pairing request will pop up on your iPhone. Select "Pair". After successful Bluetooth pairing, your phone will prompt to enable CarPlay. Select "Use CarPlay" or "Confirm".

4.5 Wireless Android Auto Connection
For wireless Android Auto functionality:
- On your car's display, select the Bluetooth option.
- Check for a Bluetooth device name starting with "CAR-BT-xxx" in the "Bluetooth" system interface.
- On your Android phone, download and install the "AutoLink" app (you may need to scan a QR code provided by the system).
- Open the "AutoLink" app on your phone. Scan for available devices and click on "CAR-XXXX" (the name of your interface).
- A prompt will ask to allow AutoLink Pro to record/project the screen. Click "ALLOW" to enable the AutoLink Mirror function.

4.6 Apple Wireless Screen Projection (AirPlay)
To use Apple AirPlay for screen mirroring:
- On your car's display, select the "Airplay UI module".
- On your iPhone, go to Wi-Fi settings. Search for a Wi-Fi network named "CAR-WIFI-xxx" (or similar, the name of your carplay device). Connect to it using the password "66668888".
- Once connected to the carplay Wi-Fi, return to your iPhone's main interface. Open the Control Center and select "Screen Mirroring".
- From the list of available devices, select "Airplay" to complete the wireless screen mirroring.
4.7 Android Wireless Screen Projection (Autolink)
To use Android Autolink for screen mirroring:
- On your car's display, select the "Autolink UI module".
- On your Android phone, ensure Bluetooth is on. Scan the QR code displayed on the car screen to download and install the "AutoLink" app.
- In the "AutoLink" app, search for available devices and connect to "CAR-XXXX".
- Grant the necessary permissions for screen recording/projection when prompted by the "AutoLink Pro" app.
4.8 Video Demonstration
Watch this video for a demonstration of the Bonroad Wireless Carplay Android Auto Interface in operation, including startup and interface navigation.
5. Maintenance
To ensure the longevity and optimal performance of your Bonroad Wireless Carplay Android Auto Interface, follow these general maintenance guidelines:
- Cleaning: Keep the device and its connections clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners directly on the unit.
- Temperature: Operate the device within the specified temperature range (-30°C to +75°C). Avoid exposing it to extreme heat or cold.
- Connections: Periodically check all cable connections to ensure they are secure and free from damage.
- Software Updates: Check the manufacturer's website or contact support for any available software updates to ensure compatibility and access to new features. Updates can often be performed via the USB expansion port.
6. Troubleshooting
6.1 Common Issues and Solutions
- No Display/No Power:
- Ensure the intelligent box is correctly inserted into the Becker slot.
- Verify the 12V+ ACC power connection is secure.
- Check your car's fuse box for any blown fuses related to the infotainment system.
- No Audio:
- Confirm the AUX connection to your original car system is correct and selected as the audio source.
- Ensure Bluetooth audio is enabled (Dial 1 on the intelligent box).
- Check your phone's volume and the car's volume settings.
- CarPlay/Android Auto Not Connecting Wirelessly:
- For CarPlay, ensure your iPhone's Wi-Fi is on and connected to the device's Wi-Fi (CAR-WIFI-xxx).
- For Android Auto, ensure the "AutoLink" app is installed and running, and permissions are granted.
- Verify Bluetooth pairing is successful for both CarPlay and Android Auto.
- Restart both your phone and the car's infotainment system.
- Echo during Calls:
If you experience echo during hands-free calls, perform the Call Echo Cancellation procedure:
- Access the CarPlay System Settings menu.
- Navigate to the Audio settings.
- Locate and click the "Start Auto AEC" button.
- Wait for approximately 20 seconds for the system to estimate and apply corrections.
- During this process, ensure the car interior is quiet.
- The correction value (0-255) will be displayed.
6.2 CarPlay System Settings
The interface provides access to specific settings within the CarPlay system:
- Camera Settings:
- Camera Type: Select between "Original Camera" or "Additional Camera" if you have an aftermarket unit.
- Parking Line: Toggle parking lines ON/OFF.
- Reverse Camera Mirror: Adjust mirroring for the reverse camera feed.
- Audio Settings:
- Adjust individual volume levels for Media, Phone, Ringtone, and Voice.
7. Specifications
| Feature | Specification |
|---|---|
| Operating Voltage | 5V |
| Operating Temperature | -30°C to +75°C |
| Power Consumption (Rated) | 1A |
| Power Consumption (Max) | 3A |
| Quiescent Current | Less than 3mA |
| Stored Temperature | -30°C to +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Shutdown Current | 300mA (Clock is on) |
| Charging Current | ≤2A (with circuit protection to 1.5A) |
| Package Dimensions (L x W x H) | 11 x 11 x 7 units |
| Package Weight | 0.2 units |
8. Warranty and Support
8.1 Warranty Terms
Our products undergo strict function and performance tests to ensure quality. All products are covered by the standard three guarantees policy for vehicle electronics.
The free warranty service does not cover the following conditions:
- Exceeding the free warranty period.
- Appearance is scratched, dirty, or deformed.
- Damage caused by improper use, maintenance, dismantling, or modification of the product.
- Damage due to force majeure (e.g., fire, flood, traffic accident, thunder and lightning, earthquake).
8.2 Additional Support
For further assistance, detailed diagrams, or specific troubleshooting steps, please refer to the official user manual PDF:
You can also contact BONROAD customer support for technical assistance.
9. User Tips
- Professional Installation: While designed for "Plug and Play," professional installation is highly recommended, especially if you lack experience with car electronics. This ensures correct setup and avoids potential damage.
- Pre-Installation Check: Always confirm your car's NTG system version and the presence of the Becker slot before attempting installation.
- Contact Support: If you plan to install the device yourself, contact support beforehand to understand any specific settings or configurations required for your vehicle model.
- Not a Screen Replacement: Remember, this product is an interface decoder box, not a replacement car screen. It integrates smartphone functions with your existing car display.
10. Frequently Asked Questions (FAQ)
- Q: Does this device replace my car's original screen?
- A: No, this is an interface decoder box that integrates Apple CarPlay and Android Auto functionalities with your existing Mercedes Benz NTG 4.5 system and display. It does not replace the screen itself.
- Q: Do I need to cut any wires for installation?
- A: The device is designed for "Plug and Play" installation into the Becker slot. For basic functionality, wire cutting is generally not required. However, for features like reversing camera input, some wiring to existing car systems may be necessary using the provided harness.
- Q: Can I use both wireless CarPlay and Android Auto?
- A: Yes, the interface supports both wireless Apple CarPlay and wireless Android Auto, allowing you to switch between them based on your smartphone.
- Q: What if I experience an echo during phone calls?
- A: You can use the "Call Echo Cancellation" feature in the CarPlay System Settings. Follow the steps in the Troubleshooting section (6.1) to calibrate the audio and reduce echo.