Introduction
Thank you for choosing the CYCPLUS DC1 Mini Pedal Exerciser. This compact and self-powered device is designed to provide a convenient and effective way to train your legs and feet, whether at home, at work, or during rehabilitation. Please read this manual carefully to ensure proper setup, operation, and maintenance of your new fitness machine.
1. Setup and Assembly
The CYCPLUS DC1 Mini Pedal Exerciser is designed for immediate use with no assembly required. Simply open the box and you're ready to begin your workout.
1.1 Unboxing and Components
Upon opening the box, you will find the following components:
- Mini Pedal Exerciser DC1
- Non-slip Mat
- Buckle Strap
- User Manual (this document)
Figure 1: Unboxed components of the DC1 Mini Pedal Exerciser.
1.2 Placement and Stability
To ensure a stable and quiet workout experience, utilize the included non-slip accessories:
- Buckle Strap: Use the 4.9 ft buckle strap to fix the distance between the Mini Pedal Exerciser and your chair, preventing the exerciser from sliding away during use.
- Non-slip Mat + Foot Pad: Place the non-slip mat under the exerciser. The mat and integrated foot pads work together to increase anti-slip effectiveness and reduce noise.
Figure 2: Triple Non-slip setup for enhanced stability and noise reduction.
2. Operating Instructions
2.1 Powering On and Self-Powered System
The DC1 Mini Pedal Exerciser features an intelligent self-powered system. Your workout generates the electricity, eliminating the need for power cords or external charging. Simply start pedaling to activate the device and its display.
Figure 3: Intelligent Self-powered System.
2.2 Dual Resistance Modes
The DC1 offers two distinct resistance modes to cater to various training needs:
Manual Mode
In Manual Mode, you can select from 10 resistance levels to adapt to your specific requirements, whether for warm-up, rehabilitation, or high-intensity rides. Adjust the resistance using the control knob on the device.
Figure 4: Manual Mode Resistance-Cadence Curve.
ERG Mode
ERG Mode allows you to set a target power output between 30W and 100W. The device will automatically control the resistance level based on your cadence to maintain your desired power output. This mode is ideal for structured workouts and consistent effort.
Figure 5: ERG Mode Power-Cadence Curve.
Figure 6: Resistance Levels and Corresponding Exercise Intensity.
2.3 Data Monitoring
The integrated LED display provides 8 key data points with a 2ms sampling rate for precise performance metrics:
- Calories
- Time
- Cadence (RPM)
- Steps
- Speed (KM/H)
- Distance (KM)
- Average Power (W)
- Current Power (W)
Figure 7: Key Data Monitoring on LED Display.
2.4 Bidirectional Pedaling
The DC1 supports bidirectional pedaling, offering versatile workout options:
- Forward Pedaling: Boosts circulation and burns calories.
- Backward Pedaling: Helps protect the spine, ankles, and joints, suitable for rehabilitation or gentle exercise.
Figure 8: Bidirectional Pedaling Benefits.
2.5 App Connectivity
Enhance your training experience by connecting your DC1 to fitness applications:
- Download the "CYCPLUS FIT" app for easy data synchronization and tracking.
- The DC1 supports connection to popular fitness apps like Zwift via Ant+ protocol, allowing for social competition and immersive virtual rides.
2.6 Quiet Operation
The DC1 is designed for quiet operation, generating only approximately 30dB of noise during use. This allows you to ride silently anywhere without disturbing others.
Video 1: Product demonstration showcasing features like compact design, self-powered motor, dual resistance modes, data monitoring, app connectivity, quiet operation, and bi-directional pedaling.
3. Maintenance
To ensure the longevity and optimal performance of your CYCPLUS DC1 Mini Pedal Exerciser, follow these simple maintenance guidelines:
- Cleaning: Wipe down the exerciser with a soft, damp cloth after each use to remove sweat and dust. Avoid using abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically check all moving parts, such as pedals and cranks, for any signs of wear or looseness. Tighten any loose screws if necessary.
- Lubrication: No regular lubrication is required for the internal mechanism.
4. Troubleshooting
If you encounter any issues with your DC1 Mini Pedal Exerciser, please refer to the following common problems and solutions:
- Device not powering on: Ensure you are actively pedaling. The device is self-powered and requires movement to activate the display.
- Inaccurate data readings: Check that the device is placed on a stable, flat surface and that your pedaling motion is consistent. If connecting to an app, ensure a stable Bluetooth/ANT+ connection.
- Overheat Protection: If the device stops working during an intense workout, it may have triggered overheat protection. This can occur when working above 70W for 10 minutes or more. Please let it cool down before continuing use.
- Unusual noises: Check for any loose parts or obstructions around the pedals or crank arms. Ensure the non-slip mat is properly placed to reduce noise.
- Difficulty adjusting resistance: Ensure the control knob is functioning correctly and not obstructed.
If the problem persists, please contact customer support for further assistance.
Figure 9: Internal motor and overheat protection note.
5. Specifications
| Feature | Detail |
|---|---|
| Product Name | Mini Pedal Exerciser |
| Model | DC1 |
| Special Features | Adjustable Resistance Level, App Connectivity, Console Display, Distance Traveled Monitor, Lightweight, Personalized Training Program, Preset Level, Speed Monitor |
| Motor Power | Self-generating electricity (160W Max) |
| Built-in Battery | 1000 mAh / 3.7 V (3.7 Wh) |
| Dimensions (L x W x H) | 503 × 355 × 213 mm (19.8 × 13.9 × 8.3 inches) |
| ERG Adjustment Range | 30 W – 100 W |
| Net Weight | 4.8 KG (10.6 lbs) |
| Pedal Q-Factor | 150mm |
| Crank Length | 90mm |
| Resistance Levels | 10 levels |
| Operating Temperature | 0°C – 40°C |
Figure 10: DC1 Dimensions and Weight.
6. User Tips
Here are some tips to maximize your experience with the CYCPLUS DC1 Mini Pedal Exerciser:
- Versatile Use: The compact and lightweight design (occupies just 0.18 m²) makes it perfect for use in various settings, including at home, while working, for rehabilitation, or as part of a weight-loss regimen.
- Overheat Prevention: If you plan to engage in high-intensity workouts, be mindful that working above 70W for 10 minutes or more may trigger overheat protection. If this occurs, allow the device to cool down before resuming your exercise.
- Consistent Data: For the most accurate data readings, ensure the exerciser is placed on a flat, stable surface and maintain a smooth, consistent pedaling motion.
- App Integration: Take advantage of the CYCPLUS FIT app for detailed tracking and consider connecting to Zwift for an engaging virtual cycling experience.
Figure 11: Exercise Freely Anytime, Anywhere.
Figure 12: Powerful & Quiet Motor.
7. Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact CYCPLUS customer service through their official website or the retailer where you purchased the product. Please have your product model (DC1) and purchase details ready when contacting support.
